Availability
Showing In Stock Items. Show All 73 Items.
If you're looking for more horsepower and torque for your engine, Chevrolet Performance Vortec top end kits may be just the ticket! These kits are available for a variety of engines, and each kit is comprised of all the pieces and part components you need to get the job done. Order the Chevrolet Performance Vortec top end kit recommended to fit your engine model.
Not Yet Reviewed
$1,582.88
An 883 to 1200cc Hooligan cylinder kit for a Harley-Davidson®, like the ones made by S&S Cycle, provides a significant increase in engine displacement, resulting in substantially more power and torque without requiring major engine modifications, making it a popular upgrade for riders seeking better performance on their Sportster 883, with benefits like increased horsepower—by boosting the engine size from 883cc to 1200cc, the Hooligan kit delivers a noticeable power gain, allowing for better acceleration and highway cruising capabilities. Typically these kits are designed as "bolt-on" upgrades, meaning they can be installed without needing extensive machining or engine rebalancing, making the process relatively simple and straightforward. Compared to a complete engine rebuild, a Hooligan kit is a cost-effective way to significantly improve your bike's power. When installing a Hooligan kit, it may be necessary to upgrade the clutch to handle the increased torque produced by the larger engine. Depending on the specific kit and your bike setup, you may need to adjust fuel injection mapping to optimize performance.
Not Yet Reviewed
$1,742.95
Top Street Performance serpentine front drive systems are designed for performance, efficiency, and style, plus they're sure to turn heads. If you are looking for a way to dress up your engine swap, look no further. TSP front drive systems come with everything you need, and are offered with black or polished components, with or without an integral power steering reservoir. Features include: * Billet aluminum brackets and pulleys * High-flow water pump * A/C compressor * 160-amp alternator * Power steering pump * Custom designed belt tensioner * Installation hardware * Instruction manual
( 2 )
$1,876.54
—
$1,901.24
Diamond Pistons Big Block 24/26 Degree Street/Strip Flat Top Series pistons are available for a variety of applications, including many Chevrolet V-8 engines from 1965-90. Forged from aluminum with single valve relief, these flat top-style pistons are offered in different bore, stroke, and rod length sizes—along with several other options. Order individually or in a set of 8. Additional details: * 1,200 hp rated * Forced pin oilers from the oil ring * Pin fitted * 3-D pockets * Designed for mild boost applications * Pins, locks and support rails (if required) included
Not Yet Reviewed
$1,542.99
Billet Specialties LS Modular valve covers offer a unique solution for hiding your LS coil packs. The valve covers are a 2-piece design that bolts together to make one cover. The base features mounts for the ignition coils, a hidden oil fill, and a 1/4 in. NPT provision for breathers or PCV in the rear of the cover. The top piece bolts to the base with polished ARP fasteners, perfectly covering the coil packs for a seamless look. Holes are provided in the side of the covers for the spark plug wires. These covers are machined from a solid piece of aluminum and are available in a variety of finishes and top styles (ribbed, logos, etc.). LS Modular valve covers are ignition coil-specific to accommodate multiple styles of coil packs. Order the model designed for fitment with your vehicle and engine application.
( 1 )
$1,569.95
D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 4 )
$1,574.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,604.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series piston and ring kits increase your horsepower potential without killing the budget. Forged and machined with your choice of premium aircraft quality 4032 or 2618 alloy, these kits are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$1,574.95
—
$1,604.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits with XR wrist pins for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include piston rings and XR wrist pins for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,874.95
United Engine and Machine Speed of Air Hyperformance piston and ring kits are offered for a wide range of Chevrolet, GMC, and Ford vehicles. Speed of Air's peerless engine technology enables internal combustion engines to operate with better fuel efficiency, better performance, and with substantially decreased emissions output. These kits are available in a variety of bore, stroke, rod, dish options and include dark bronze/gold Cerakote coating. Increase your ride's available power and torque with a set of Hyperformance pistons and rings.
Not Yet Reviewed
$1,737.99
—
$2,300.00
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series pistons increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy with horizontal gas porting, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * XR Extreme duty wrist pins * Deep CNC valve reliefs * Horizontal gas porting
( 2 )
$1,619.95
Withstand the pressure, even under extreme loads, with Mahle cast aluminum diesel piston and ring kits. They are delivered with standard features, like ring carriers made from high-strength austenitic cast iron, salt core cooling channels or cooled ring carriers, and a Mahle Grafal coating for optimum skirt performance. The kits include a full set of rings to complete the installation. Diesel engines have high-temperature loads and demand improved materials for fatigue resistance, reinforced critical points for maximum strength, and improved piston cooling. Mahle cast aluminum diesel pistons meet these requirements to keep your diesel engine running in top form, despite today's challenges.
Not Yet Reviewed
$1,567.40
—
$2,085.81
ATK High Performance Chevy LM7 5.3L short blocks are assembled with OE flat top pistons and offer these engine specifications: * Seasoned 5.3L LM7 block * 1999-2007 year range * Bore/stroke: 3.810 in. x 3.622 in. * Displacement: 330 cu.in * OEM GM 24-tooth reluctor wheel crankshaft * OEM GM forged powder metal rods * Stock hypereutectic flat top pistons with two valve reliefs * Compression ratios: 61cc = 9.8:1/64cc = 9.5:1/68cc = 9.1:1 -- Can vary due to deck height/gasket thickness * Plasma moly rings * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed
Not Yet Reviewed
$2,043.99
Brodix Dragon Slayer 26 degree cylinder heads go from innovative design to precision manufacturing for efficient, effective performance to top off your big block build. These aluminum cylinder heads require no porting, making them the most powerful heads in their class, and they are available with 320cc or 365cc intake ports. Brodix Dragon Slayer 26 degree cylinder heads also accept standard pistons, intake manifolds, and rocker arms. Brodix Dragon Slayer 26 degree cylinder heads feature: * DS 320 and DS 365 models are available bare or assembled * 320cc intake port flows over 370 cfm * 365cc intake port flows over 392 cfm
( 2 )
$1,746.99
Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control
( 19 )
$1,500.97
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 27 )
$2,029.95
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,587.50
—
$1,933.50
COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 40 )
$1,545.95
—
$1,676.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,558.50
—
$1,595.50
Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.
( 3 )
$1,524.99
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 11 )
$1,539.99
—
$1,999.99
Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.
( 9 )
$1,524.99
COMP Cams Xtreme marine cam and lifter kits take advantage of the newest developments in camshaft design. Their aggressive lobe design produces better throttle response and top-end horsepower than other systems with the same duration at .050 in., while delivering increased engine vacuum. These kits are available for everything from pleasure boats to race applications, so you can always have Xtreme performance on the water.
( 20 )
$1,545.95
Trick Flow High Port® 240 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost super- and turbocharges, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide more material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails.
( 3 )
$1,649.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
