Availability
Showing In Stock Items. Show All 103 Items.
Manufactured by ARP, Edelbrock head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. They are cold-formed to ensure molecular integrity and heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal to facilitate cylinder head re-torquing. Hardened and parallel-ground washers are included, and they're rated at 170,000 psi.
Not Yet Reviewed
$1,971.95
Edelbrock Victor CNC 11-degree 6-bolt LS3 cylinder heads are specifically designed for high-horsepower, naturally aspirated, and boosted applications. Utilizing the popular LS 6-bolt design, they are compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The design offers increased clamping capacity over the standard factory 4-bolt configuration and greatly improves head gasket sealing, making them ideal for high-compression naturally aspirated engines and high-boost applications. Edelbrock Victor CNC heads are manufactured with premium materials and machined to the industry's tightest tolerances. They have an 11-degree valve angle, copper infiltrated powder metal valve seats, and fully CNC-machined ports for maximum airflow. The machined runners and chambers, along with the valve angle increase overall flow capability, while the revised water jacket design enhances thermal conductivity and tunability. Premium manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, eliminating leak down and increasing cylinder pressure during engine operation. Finally, the .700 in. thick deck and reinforced rocker rails make these cylinder heads ideal for high-horsepower applications.
Not Yet Reviewed
$1,506.95
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,599.99
Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.
( 7 )
$1,599.99
—
$1,749.99
Trick Flow® potent PowerPort® A460 360 cylinder heads for Ford 429/460 are ideal for use in drag racing, monster trucks, tractor pulling, and other ultra-high power, large cubic inch engine combinations. The heads have CNC Competition Ported runners with Trick Flow® top-of-the-line, premium high resolution surface finish for maximum airflow and performance in all-out naturally aspirated or forced induction applications. Other features include big block Chevrolet-style exhaust port openings and a heavy duty 18-bolt mounting pattern for superior gasket retention. Trick Flow® PowerPort A460 360 cylinder heads are available fully assembled or as bare castings and are sold individually.
( 2 )
$1,699.99
—
$2,349.99
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,702.95
$1,500.75
—
$1,791.95
Trick Flow's potent PowerPort® A460 340 cylinder heads for Ford 429/460 are ideal for use in drag racing, monster trucks, tractor pulling, and other ultra-high power, large cubic inch engine combinations. Fast As Cast® runners precisely duplicate the port shape and profile of CNC-ported heads, delivering near-CNC-ported airflow, power, and performance for about the same price as regular cast cylinder heads. Other features include big block Chevrolet-style exhaust port openings and bolt pattern and your choice of standard or heavy duty 18-bolt mounting patterns. Trick Flow PowerPort A460 340 cylinder heads are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$1,749.99
Building on the features that make the GenX® 255 for GM LS3 great—like 12° valve angles and relocated valves for reduced valve shrouding and improved piston-to-valve clearance—Trick Flow's GenX® 280 HIP cylinder heads withstand the abuse of high horsepower, power-adder performance demanded by today's racers and engine builders. The GenX® 280 heads list of features is long, and it starts with the HIP'd (Hot Isostatic Pressed) castings. This process significantly increases the casting's density for improved tensile and fatigue strength. It continues with industry leading airflow through CNC Competition Ported 280cc intake ports and Trick-Alloy™ powdered metal valve guides for added longevity. Manley Severe Duty intake valves and Extreme Duty Inconel exhaust valves are designed to withstand the abuse of extreme temperatures and stresses of big power adder applications. Trick Flow® by PAC Racing dual valve springs, titanium retainers, .750-inch thick deck, and 6-bolt-per-cylinder mounting pattern round out the features. Trick Flow® GenX® 280 HIP cylinder heads for GM LS3 work with all LS3 intake manifolds and LS9/LSA blower assemblies and fit all LS head gasket and engine block combinations. These cylinder heads are available fully assembled or as bare castings. Sold individually. Key features: * 280cc intake ports and 67cc combustion chambers * HIP'd casting * Accepts 3/8 in. pushrods * Powdered metal valve guides * 2.165 in. NK-844 severe duty stainless steel intake valves * 1.600 in. XH-432 extreme duty Inconel exhaust valves * .750 in. thick deck * 6-bolt configuration * Assembled heads include a Trick Flow® LS3 rocker stand
Not Yet Reviewed
$1,749.99
Trick Flow GenX® 235 cathedral port cylinder heads are fully CNC-machined to significantly improve the performance of extreme street and race LSX engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 235 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 1 )
$1,549.99
Brodix Cylinder Heads Race-Rite oval port cylinder heads for big block Chevys bolt on directly in place of your stock heads, so you can reuse your intake manifold and pistons. Because the stock exhaust ports are in the stock location, you don't have to worry about header or manifold interference. These aluminum heads are great for street and strip applications. They feature 119cc combustion chambers, air conditioner bracket holes, solid phosphorous bronze guides, high-torque 270cc intake ports, a fully machined valve cover rail, and bulletproof rocker stands.
( 24 )
$1,634.99
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,933.50
$1,587.50
—
$1,740.15
Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.
( 9 )
$1,524.99
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$1,595.50
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
On Sale
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
$1,519.16
—
$1,655.06
Ford Performance Parts teamed up with Jon Kaase to redesign their 429 Cobra Jet cylinder heads, and the results are these Super Cobra Jet heads. They feature revised valve angles and locations to reduce cylinder wall shrouding and improve flow, along with redesigned combustion chambers to accommodate the more centrally located valves. These heads use the same valves, valve springs, retainers, and 7/16 in. stud-mounted roller rockers as the current Ford Performance Parts 429 Cobra Jet heads, and the standard Cobra Jet intake and exhaust manifolds bolt right on. This new design offers a 25-50 HP increase over current Cobra Jet heads, depending upon displacement and camshaft.
( 13 )
$1,772.99
Victor and Victor Jr. Series aluminum heads are designed using the latest induction technology for outstanding performance and maximum horsepower. They're ideal for the small block Ford Windsor, and small and big block Chevys. Victor Jr. Series heads are perfect for many types of competition and ultra-high performance street machines. They include threaded inserts (heli-coil) in rocker stud and exhaust manifold bolt holes. They have hardened seats and bronze valve guides for strength and durability, and a minimum 9/16 in. deck thickness and machined valve cover rails provide a more consistent gasket seal. Victor Series heads are a step above the rest, for even greater gains in horsepower. All of these heads feature reinforced rocker stud bosses, high-flow intake/exhaust ports, and specially contoured combustion chambers.
( 2 )
$2,212.50
Chevrolet Performance Bowtie aluminum cylinder heads offer an ideal combination of street drivability and drag-strip performance. These aluminum cylinder heads provide a broad power range with ample low-end torque, along with excellent throttle response, good mid-range torque and enough top-end power to beat your competitors to the finish line. Designed for high performance applications, the Bowtie Street cylinder heads are manufactured to precise machining tolerances, with thick deck surfaces and high-velocity airflow passages. They are available in either rectangular or oval intake port configurations. The rectangular intake ports are larger in volume and have been designed to enhance high-rpm horsepower, which makes them best for vehicles that see frequent drag-strip action. Cylinder heads with oval intake ports are smaller in volume and designed for greater low-rpm torque, therefore they're best for street applications, where lots of bottom end, off-the-line power is desired. Bowtie Street Cylinder Head Technical Notes: * Made from 356-T6 aluminum * Available in rectangular or oval-port designs * Will work on Mark IV and Gen V, VI blocks * 9/16 in. thick decks * As-cast intake and exhaust ports * No heat risers * 1.55 in. valve spring seat diameter * Heli-coiled 7/16 in. screw-in rocker stud holes * Designed for use with 3/8 in. pushrods * Use intake gasket P/N 12366985 and bolt kit P/N 12367959 * Use head gasket P/N 12363414 for bores to 4.370 in. and P/N 12363413 for bores 4.470 in. to 4.540 in. (Mark IV) * Use head gasket P/N 12363412 for bores to 4.370 in. and P/N 12363411 for bores 4.470 in. to 4.540 in. (Gen V, VI) * Use head bolt kit P/N 12367779 Bowtie Oval-Port Aluminum Cylinder Head Assembly: * Completely assembled with 2.250 in./1.880 in. 11/32 in. stem valves * 290cc oval intake ports * 110cc exhaust ports * 110cc combustion chambers Cylinder head is assembled with the following components: * 2.190 in. intake valves * Valve spring retainers * 1.880 in. exhaust valves * Valve locks * Valve springs * Valve seals * Valve spring shims * Rocker arm studs * Pushrod guideplates
Not Yet Reviewed
$1,685.52
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 12 )
$1,539.99
—
$1,999.99
Pro-Filer big block Chevy Sniper X cylinder heads are fully CNC-machined for optimum performance. They're designed to be used with standard big block Chevy parts, including stud mounted rockers and pistons or the most wicked parts in the industry. They flow over 460 cfm on a 375cc runner and over 325 cfm on the exhaust. Features include a 5 angle valve job with .350 in. longer intake and .100 longer exhaust valves, 119cc heart-shaped combustion chambers, and 24 degree OEM X275 class accepted valve angles. Wake up your 502 c.i.d. or larger motor with the incredible performance of Pro-Filer big block Chevy Sniper X cylinder heads. Additional features: * Spark plug locations are machined for a gasketed 3/4 in. reach plug NGK R5671A-7 or colder * Requires a 1 in. longer head bolt or stud next to exhaust ports *Available with either 355cc or 375cc intake runners and steel or copper alloy valve seats
Not Yet Reviewed
$2,064.75
Clearance
Brodix Cylinder Heads Big Duke PB 1800 cylinder heads are designed to work with big cubic inch pro-stock style engines. They are made from A-356 virgin aluminum, include ductile iron valve seats, and have accessory bolt holes drilled. The Big Dukes are capable of flowing over 500 cfm, perfect for high-winding, high-horsepower big block engines. These heads will require the use of the following special parts for installation: * Intake manifold * Headers * Shaft mount rocker arm system * Head stud kit * Custom-fabricated valve covers * Custom-made piston set
Not Yet Reviewed
$3,020.99
$1,946.50
Edelbrock Victor LS-R Pro-Port cylinder heads are hip to racing! These bare heads are designed to maximize the potential of your race-oriented LSX block. They are processed with a technique called Hot Isostatic Pressing (HIP) that results in an incredibly strong, super-dense casting with three times the fatigue life! These un-ported versions of the Edelbrock Victor series heads are cast in the USA with extra-thick walls to accommodate professional custom CNC porting. A true canted valve design offers the utmost in port flow and combustion efficiency with a 2-valve design. And, these Victor LS-R bare heads use the GM SB2 valve cover footprint required by the added width of the canted valve layout. The stock exhaust bolt pattern is retained and magnesium-bronze valve guides are included, but not installed. Get hip to Edelbrock Pro-Port and their Victor LS-R bare cylinder heads.
Not Yet Reviewed
$1,757.50
Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads are bolt-on performance upgrades for Gen III HEMI engines. They are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories, as well as Hellcat components. The cylinder heads have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and are heat-treated to T6 specifications. Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads feature fully CNC-machined combustion chambers, along with CNC-profiled bowls and port entries/exits for improved airflow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength, and extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from the bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock.
( 3 )
$1,611.50
—
$1,639.50
Chevrolet Performance LSX-SC cylinder heads are developed for big-boost levels and high-horsepower engines. Undergoing a Hot Isostatic Pressing (HIP), this process is a way of casting that removes the air pockets while improving the mechanical properties of the components. LSX-SC cylinder heads are the same ones you'll see on Chevrolet's COPO 350 engine. They're available in three different configurations: as-cast; bare with CNC-machined features; or fully assembled CNC-machined cylinder heads complete with valves and springs. Features and benefits include: * Signature LSX 6-bolt head-clamping pattern * Increased deck thickness from 0.650 in. to 0.750 in. * Exhaust face thickness increased from 0.177 in. to 0.300 in. * Dense T356 aluminum material
Not Yet Reviewed
$2,203.43
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
