Availability
Showing In Stock Items. Show All 19 Items.
Jesel Sportsman tie-bar roller lifters offer Jesel quality and durability at a lower cost. From mild drag engines, street/strip builds, pleasure boats to circle track, these lifters will give you the bulletproof performance you are looking for. Sportsman lifters have polished 8620 heat-treated bodies and are assembled with bronze bushing cam rollers. They also share the same roller, axle, tie-bar, and hardware found in Jesel's Pro Series line. The bronze bushings used have been tested for durability through hundreds of torturous dyno pulls and over a million cycles on Jesel's in-house Spintron. Lifters are available for select OE and aftermarket applications with a range of lifter body diameters from .842 in. to .905 in. with either offset or on-center pushrod seats. Choose the proper fit for your application. Features: * Heat-treated polished 8620 bodies * .842 in., .875 in., and .905 in. diameter bodies * Heat-treated stainless steel tie-bars * Pressurized oiling to the axle assembly ensures adequate oil supply * Heat-treated and polished tool steel roller
Not Yet Reviewed
$1,775.00
Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.
( 22 )
$1,545.95
—
$1,745.95
COMP Cams is bringing the musclecar sound back, and it's nastier than ever! Few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound that you demand, COMP Cams' engineering team proudly introduces the Thumpr Series hydraulic roller cam and lifter kits. They are designed for use in engines that were originally equipped with flat tappet camshafts. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. They're designed to maximize the rough-idling characteristics of the cams, giving you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. They are available in three different grind profiles. Each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits feature a cutting-edge hydraulic roller design that delivers a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 17 )
$1,745.95
COMP Cams Race XD mechanical roller lifters are strong, durable, and versatile. They feature a lightweight modular design with interchangeable pushrod seats. Available in medium or large offsets with left or right placement, Race XD lifters are configurable to clear the most extreme intake angles. Two finishes are offered: REM finished bodies create an extra-smooth surface for reduced lifter body and bore wear; and the DLC-coated bodies further minimize friction for the ultimate in durability. For excellent strength in extreme operating conditions, COMP Cams also enhances their Race XD lifters with a proprietary bronze alloy roller wheel bushing and an oversized captured link bar to connect the individual lifters. In an effort to eliminate the culprit of most roller lifter failures, these bushed solid roller lifter sets have oiling systems that ensure consistent roller wheel and axle lubrication. Order the lifters recommended for your year/make and engine application.
Not Yet Reviewed
$1,645.95
Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,580.95
—
$1,621.95
S&S Cycle Milwaukee 8 gear drive cam chest kits include everything necessary to convert to gear drive for improved cam timing accuracy and eliminate the stock cam chain tensioner. All parts in each kit are matched to ensure superior quality, fit, finish and performance. Each kit includes necessary gaskets, components, and hardware required for a complete installation. S&S gear drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed for your bike. Features of Milwaukee 8 gear drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee Pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improve tappet stability in high-lift situations * Outer drive gears included * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,815.95
COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts unlock a major power upgrade for the 2011+ Ford 5.0L engine. Specifically designed for Coyote V8 applications, these camshafts are counterbalanced and work with phaser limiters to produce optimum, safe power. By taking cutting-edge race technology and applying it to street applications, COMP Cams has engineered these phaser-friendly cams with an exclusive, integrated counterbalance design that ensures a smoother operating valvetrain. They are available for both naturally aspirated and supercharged engines, with three stages available in each series. All cams are "no springs required." Optimized race and street profiles give you power where you need it the most, whether that's maximized midrange power and torque or increased top-end horsepower. Drive with COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts and drive with sophisticated power!
Not Yet Reviewed
$2,046.95
COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.
( 1 )
$1,649.95
—
$2,078.54
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
