Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
23 Results Found For "small"
On Sale
DiabloSport Modified PCM and inTune i3 Packages
After installation, DiabloSport modified PCM and inTune i3 packages help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride without popping the hood! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, a DiabloSport inTune i3 tuning device is included to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport modified PCM and inTune i3 package best suited for your ride! More product and specifications include: * The pre-loaded i3 programmer includes dyno-tested performance programs designed specifically for your ride * Responsive high-definition touchscreen that allows you to navigate menus easily while retaining a small form factor * Easily updateable by wi-fi on both Windows and Mac-based operating systems * Multi-vehicle licensing * Scan and clear DTCs * Calibrate speedometer for different tire sizes and/or gear changes * Tune the transmission shift points and firmness * Adjust speed, rev limiters, and much more
( 1 )
$1,999.95
$1,528.95
—
$1,798.95
American Racing Headers GM A-Body Headers
American Racing Headers GM A-body headers are available to fit a variety of classic GM muscle-car makes and models in versions to accommodate small blocks, LS swaps, and big blocks. Each primary tube is sized to generate the greatest horsepower with the least amount of restriction. State-of-the-art, high-flow merge collectors are tuned for increased horsepower and torque. Available in wide range of primary tube sizes and a choice of collector diameters, they offer a great fit and outstanding performance. Product features of American Racing Headers GM A-body headers include: * Made entirely of long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors are complete with welded scavenger spikes * All American Racing Headers exhaust systems are for off-road use only
( 9 )
$1,848.24
Forgeline Motorsport Series TS3R Custom-Order Wheels
The Forgeline Motorsport Series TS3R wheels are a lightweight forged racing wheel that is engineered for race cars and dedicated track duty. Each Motorsport Series TS3R wheel is custom made-to-order, one-at-a-time, for each individual customer and each unique vehicle application. Built ready for the track, the Forgeline TS3R is a three-piece modular version of Forgeline Motorsports original one-piece forged monoblock TS1R wheel and is engineered with the same 2,100 lb. street tire load rating to handle serious motorsport applications. The custom made-to-order TS3R three-piece wheel is comprised of a center that is precision-machined from proprietary 6061-T6 aluminum and combined with heat-treated 6061-T6 spun aluminum rim shells. It uses hidden American-made ARP stainless steel assembly hardware for a smooth clean appearance and faster/easier wheel cleaning. The TS3R features a linear 12-spoke design with machined I-beams on each spoke. The TS3R's modular forged construction and computer-simulated FEA design process combine to produce a highly-customizable wheel that is lightweight, stiff, and has excellent fatigue strength. The TS3R can be made for virtually any fitment (4-lug, 5-lug, small diameter 6-lug, or centerlock) with any width and offset in 18-inch, 19-inch, and 20-inch diameters. And just like any Forgeline wheel, the TS3R offers fully-customizable finish options. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,685.00
—
$1,995.00
Forgeline Motorsport Series TS1R Custom-Order Wheels
The Forgeline Motorsport Series TS1R wheels are a lightweight forged racing wheel that is engineered for race cars and dedicated track duty. Each Motorsport Series TS1R wheel is custom made-to-order, one-at-a-time, for each individual customer and each unique vehicle application. Built ready for the track, the Forgeline one-piece forged monoblock TS1R wheel is engineered with a 2,100+ lb. street tire load rating to handle serious motorsport applications. The TS1R wheel features a linear 12-spoke design with machined I-beams on each spoke and a deep concave profile. With a fully-forged one-piece monoblock construction, the Forgeline TS1R utilizes manufacturing technology similar to Forgeline's legendary GS1R wheel but is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The TS1R's one-piece monoblock forging and computer-simulated FEA design process combine to produce a wheel that is lightweight, stiff, and has excellent fatigue strength. The TS1R is currently available in 18-inch, 19-inch, 20-inch, 21-inch, and 22-inch diameters with a range of widths and offsets. It can be made to accommodate most 5-lug, small 6-lug (Dodge Viper), and centerlock applications, and it can be made with knurled beads to limit tire slip. Depending on size, the TS1R wheel may be available in deep, medium, or shallow concave profiles. And just like any Forgeline wheel, the TS1R is available with fully customizable finish options. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,895.00
—
$1,935.00
Forgeline Heritage Series FF3 Custom-Order Wheels
Forgeline's Heritage Series wheels represent the best of their designs from over two decades of engineering and producing the finest custom-made-to-order forged aluminum wheels in retro-inspired designs that work well with virtually every class of automobile, from muscle cars to supercars to luxury vehicles. Each wheel is custom made-to-order one at a time for each individual customer and each unique vehicle application. The Forgeline FF3 Heritage Series wheel is a basic 5-spoke design that mimics the simple blocky styles that were popular in the late 1990s. This wheel design features a flat face profile, spokes that taper to a narrower width at the rim register, chamfered edges, and our small, engraved center cap. Though it looks like a throwback to another era, the FF3 is a modern three-piece wheel that is built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel hidden fasteners, and heat-treated rim sections. This Forgeline wheel style is available with a stepped lip outer in 17-inch, 18-inch, 19-inch, and 20-inch fitments and features a standard powdercoated center finish with a polished outer rim. But since each wheel is custom built-to-order, Forgeline can also offer special features like custom offsets, center locking hubs, and a large choice of finish combinations. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,595.00
—
$1,995.00
TCI Competition Torque Converters
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$1,506.95
—
$1,914.95
American Racing Headers C3 Corvette Headers
American Racing Headers C3 Corvette headers are available for both conventional small block applications and for LS-based engine swaps into 1968-1982 C3 Corvette chassis. C3 owners can now get a set of ultra-high-quality headers that fit and perform great and will last indefinitely. ARH C3 Corvette headers are available in range of primary tube sizes and collector diameters. Small block headers work with straight or angle plug heads. Both LS and small block ARH headers offer easy plug access, along with excellent ground clearance on lowered vehicles. Also available is ARH's C3 long system that includes their C3 headers, leak-free ball socket connections, and connection pipes that extend through the circular openings of the transmission cross member. American Racing Headers C3 Corvette headers features: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 2 )
$1,517.01
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,849.99
Zumbrota Remanufactured Axle Assemblies
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$1,550.99
—
$1,999.99
Zumbrota Remanufactured Manual Transmissions
Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 21 )
$1,836.99
—
$1,979.99
Zumbrota Remanufactured Transfer Cases
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$1,507.99
—
$1,991.99
Baer Brakes SS4+ Disc Brake Systems
For serious stopping power, check out Baer's SS4+ disc brake systems. They're designed to fit most 15 in. wheels, and feature Baer's S4 4-piston caliper mounted to a 2-piece slotted, drilled, and zinc plated rotor. Kits include high-grade stainless hardware and a pre-assembled 2-piece rotor. These systems are available for the front or rear, in black, silver, and red finishes. Order the model designed for your axle and wheel bolt pattern. If you've been looking for a street-legal, lightweight, drag strip or autocross-compatible brake system—you've come to the right place!
( 10 )
$1,949.95
Classic Performance Complete Front and Rear Disc Brake Kits
Classic Performance complete front and rear disc brake kits are designed as direct bolt-on applications. They include front rotors and calipers, a master cylinder, and rear rotors and calipers. The complete kits are available in different configurations to fit either stock or aftermarket drop spindles. Brake lines, a proportioning valve, and mounting hardware are also included to complete the installation. Improve your ride, braking, steering, and handling with Classic Performance complete front and rear disc brake kits.
( 21 )
$1,554.99
—
$1,611.99
Scat Modern Muscle Engine Rotating Assemblies
Scat Modern Muscle engine rotating assemblies are available with high-quality Scat forged 4340 crankshafts and I-beam or H-beam connecting rods with 7/16 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application, and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe.
( 3 )
$1,839.99
—
$1,902.99
Classic Performance Rear Disc Brake Kits
Classic Performance rear disc brake kits not only work with stock rear-ends, but they also bolt directly onto a 10- or 12-bolt rear-end. These kits include rotors, loaded calipers with a built-in E-brake, rubber hose kits, and all mounting hardware. The rotors are available in solid or cross-drilled and slotted surface, and they'll work with C-clip eliminators. Some modifications may be necessary, depending upon the application. Order the kit designed for fitment with your axle, flange, and wheel bolt pattern.
( 19 )
$1,508.99
Classic Performance Complete Front and Rear Big Brake Kits
Classic Performance Products introduces its complete line of front and rear big brake kits. The parts are of excellent OEM quality and a great option for strong braking, good looks, and great value. These are complete 4-wheel kits, with all the rotors, calipers, brake lines, brackets, cables, hoses, clips, hardware, and instructions for a hassle-free installation. Classic big brake kits require larger diameter disc brake type 16 in. wheels.
( 6 )
$1,704.99
UniSteer Rack and Pinions
UniSteer rack and pinions are designed to provide precision steering for easier driving. Made from cast aluminum with a variety of finishes available, these replacement racks can be ordered to complement either manual or power-assist configurations. They're offered in fitment applications for a wide range of year, make, and model vehicles. Accessories included will depend upon the model you select. Better steering control begins with UniSteer! UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 57 )
$1,983.99
Classic Performance Pro-Touring Stage 1 Kits
Classic Performance Pro-Touring Stage 1 kits provide the ultimate in performance for an affordable price. They are made with the quality you have come to expect from Classic Performance Products. Included with the Stage 1 kits are front and rear performance sway bars, lowered springs, gas-charged monotube front and rear shocks, and mounting hardware.
( 2 )
$1,777.99
—
$1,975.99
Classic Performance Grand Slam Suspension Kits
Take the bounce out of your rough-riding truck and enjoy a smooth, comfortable ride. Classic Performance Grand Slam suspension kits are designed primarily to upgrade your classic truck's ride, handling, and performance to modern standards. Want to drop your height? These packages include components specially constructed to address fender-to-tire friction experienced on many lowered trucks. Install the latest suspension setup from Classic Performance and you'll feel like you're driving a totally different vehicle!
( 2 )
$1,634.99
Scat Engine Rotating Assemblies
Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.
( 134 )
$1,768.99
Hughes Performance Street and Strip Transmissions
Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.
( 30 )
$1,917.99
—
$1,961.99
Classic Performance Original Offset SOS Grand Slam Disc Brake Kits
Looking for a spindle and brake kit for your lowered truck that won't push your wheels out? Classic Performance Original Offset SOS Grand Slam disc brake kits feature modular 2 in. drop spindles that install easy without modifications, offer adjustable steering stops, and provide an additional 1 1/8 in. more fender-to-tire clearance. Kits include: * 2 in drop spindles * 12 in. diameter front brake rotors * Loaded brake calipers * Caliper mount brackets * Bearings * Seals * Spindle nuts * Banjo bolts * Rubber brake hoses * Ball joints * Tie rod ends * Adjusting sleeves and a booster * Master cylinder * Proportioning valve assembly * Front and rear coil springs * Front and rear shock absorber
Not Yet Reviewed
$1,634.99
Classic Performance Front Coilover Conversion Kits
Classic Performance front coilover conversion kits can help drop your ride from just below stock height to several inches lower. The included shocks are double adjustable coilover models so you can pinpoint the type of ride you want. These kits provide lower control arms featuring either a silver or black powdercoat finish, depending on application; upper control arms are included with most kits, along with mounting hardware. Convert your vehicle into a low-riding road-hugger with a Classic Performance front coilover conversion. Order the kit designed to fit your application.
Not Yet Reviewed
$1,806.99
