Free Shipping on Orders Over $109 at Summit Racing

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$1,799.95

—

$2,049.95

$1,618.95

—

$1,843.95

On Sale

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$1,999.95

—

$2,199.95

$1,798.95

—

$1,978.95

Homak 44 in. RS Pro Flip Top Power Service Carts

Homak 44 in. RS Pro flip top power service carts are available in 8-drawer or 9-drawer models. Constructed from 18-gauge steel, the workstation carts are available in four color options: Midnight Black, Rally Sport Blue, Fury Red, and Battleship Gray. Additional product details: * Power tool drawer with power strip includes four electric outlets and two USB ports to efficiently store, organize, and charge power tools in one place * Top till includes full-extension gas struts and a lockable security compartment with an additional power strip to store and charge phones, laptops, and other devices * Four 5×2 in. casters with a weight capacity of 520 lbs. each: two swivel locking and two swivel * Equipped with HMC High Security Locking System to keep valuables safe and secure * Heavy-duty rubber grip push handle provides comfortable grip and easy maneuverability * Full-length black aluminum contoured, scoop-style lift latch drawer pulls prevent drawers from opening and provides hassle-free access to tools * Drawers with replaceable ball-bearing slides have a 100 lb. weight capacity per slide pair * Non-slip PVC foam drawer liners and top mat to keep tools stationary * Bold UV protective high-gloss powdercoat finish provides a sleek look to overall design

Not Yet Reviewed

$1,679.99

—

$1,768.99

Scott Drake Power Steering Conversions

It's like feeling the road for the very first time! Your classic Mustang will be much more fun to drive with a power steering conversion from Scott Drake. The conversion boxes are remanufactured up-to-date integral power steering gearboxes that will provide a true modern power steering feel, feedback, and a sporty 16:1 ratio. They bolt directly to the factory mounting location and to fit the stock pitman arm without any interference or modification of the shock tower. Drake offers kits to convert manual to power steering and to upgrade factory power to modern power steering. Eliminate leaky control valves and sloppy steering; enjoy driving your classic with a Scott Drake integral power steering conversion kit.

Not Yet Reviewed

$1,649.95

aFe Black Series Momentum Carbon Fiber Pro 5R Air Intake Systems

aFe Black Series Momentum carbon fiber Pro 5R air intake systems upgrade the airflow and performance of your vehicle. And they do it with style. aFe Black Series Momentum carbon fiber systems feature: * Outflows factory intake * Unique (patent-pending) filter-to-housing interface for easy installation * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber housing and tube * Large Pro 5R 5-layer oiled washable/reusable high performance air filter * Serialized plate to assure the authenticity * Premium stainless steel clamps and a reinforced silicone coupler * Momentum intakes are designed with fewer parts for a quick and simple installation

Not Yet Reviewed

$1,532.00

Westin Pro-E Power Running Boards

Westin Pro-E power running boards are superior upgrades that combines the functionality and appearance of your vehicle. They are designed with a practical feature that automatically deploys when your vehicle's door is opened, allowing easy entry and exit. When the door is closed, the running boards smoothly retract, seamlessly integrating with your vehicle's body and maintaining its sleek appearance. Pro-E boards are equipped with two waterproof IP68 rated motors per side, and are engineered for durability and reliability in any weather condition. The integrated LED lights illuminate the 6 in. wide, durable aluminum step surface, ensuring enhanced visibility and safety. Whether it's day or night, you can confidently step onto these running boards with their impressive weight capacity of up to 300 lbs. per side. Westin Pro-E power running boards are constructed from corrosion-resistant aluminum and finished with a durable textured black powder coat. The included vehicle-specific mounting brackets and hardware guarantee a seamless installation process, ensuring a perfect fit for your vehicle. Choose the boards designed for your vehicle.

1.0 out of 5 stars ( 2 )

$1,723.99

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$1,999.95

—

$2,099.95

$1,798.95

—

$1,888.95

FiTech Go EFI 8 Power Adder Plus 1200 HP Fuel Injection Systems

More power! FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems are for gearheads interested in major power for road courses or the racetrack, while maintaining overall drivability. These systems combine eight high-flow injectors with an annular discharge increased to 20 streams to handle the massive flow. They fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 1200 hp. The Power Adder Plus features a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it, and the ability to change air/fuel ratios and ignition timing on the fly. To obtain complete atomization, FiTech uses a swirl spray annular discharge called Wet Flow technology, spraying the fuel in from multiple directions. Go EFI 8 systems with mounted ECUs offer spark control without the need for an external spark box or special distributor. To lower temperatures and extend the unit's life, FiTech uses a voltage-controlling fuel pump control, reducing the juice under low loads. Each system has a hand-held controller with touch-screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Take on the day, no matter what it brings—with FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems. Additional features include: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace GM-type sensors and Bosch 4.2 wideband oxygen sensors * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Designed for applications making at least 6 inches of vacuum at idle. * Complete tuning from Pro Laptop software, with 8GB of data-logging

3.89 out of 5 stars ( 37 )

$1,597.00

—

$1,727.99

FiTech Go EFI 4 Power Adder 600 HP Self-Tuning Fuel Injection System with Force Fuel System

FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems with Force Fuel systems are a unique combination of a boost-ready throttle body and fuel injection upgrade convenience. The Power Adder systems allow you to ditch that old carburetor and keep your supercharger, blower, or nitrous setup. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. Blow away all the competition when you order the FiTech Easy Street 600 hp and Force Fuel systems combo designed to fit your boosted performance engine application. Includes: * FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems * FiTech Force Fuel systems

Not Yet Reviewed

$1,606.99

—

$1,879.99

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$1,999.95

—

$2,099.95

$1,798.95

—

$1,888.95

aFe Black Series Momentum Carbon Fiber Pro Dry S Air Intake Systems

aFe Black Series Momentum carbon fiber Pro Dry S air intake systems upgrade the airflow and performance of your vehicle. And they do it with style. aFe Black Series Momentum carbon fiber systems feature: * Outflows factory intake * Unique (patent-pending) filter-to-housing interface for easy installation * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber housing and tube * Large Pro DRY S 3-layer oil-free washable/reusable high performance air filter * Serialized plate to assure the authenticity * Premium stainless steel clamps and a reinforced silicone coupler * Momentum intakes are designed with fewer parts for a quick and simple installation

Not Yet Reviewed

$1,532.00

aFe Vulcan Series Exhaust Systems

aFe Vulcan Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Vulcan Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation, with most applications requiring no modifications. Vulcan Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. They're constructed of 304 stainless steel and include black or polished 304 stainless steel tips with a laser-cut stainless steel aFe power badge. Order the model with size specs and other options recommended for your vehicle.

4.33 out of 5 stars ( 3 )

$1,532.00

—

$1,942.00

aFe Scorpion Complete Grilles

aFe Scorpion complete grilles offer major aesthetic upgrades for a variety of truck applications. With a one-piece construction, unique laser-cut designs, and integrated high-intensity CREE LEDs, these grilles make a durable, stylish, and high-performance replacement for your factory grille. Made from heavy-duty steel with a tough, two-stage black powdercoat finish for corrosion, debris, and discoloration resistance, each grille is a direct bolt-on replacement, requiring no cutting, drilling, or welding and comes with stainless steel hardware for lasting performance. Order the aFe Scorpion complete grille designed for your year, make, and model. Product details: * One-piece grille replacement for your factory grille * Includes ZROADZ high-intensity CREE LED light bar(s) or round lights (dependent on grille model selected) * Industry-leading 2-stage black powdercoat finish offers protection from road debris, corrosion, and discoloration—coating process includes sandblasting, primer, and a topcoat * Stainless steel hardware provided for corrosion resistance * Fits vehicles with or without forward-facing camera option (depending on vehicle model)

Not Yet Reviewed

$1,942.00

aFe Mach Force XP Exhaust Systems

aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.

4.44 out of 5 stars ( 36 )

$1,532.00

—

$1,684.00

aFe Johnny O'Connell Stage 1 Suspension Packages

These aFe Stage 1 suspension packages were tuned by Corvette racer Johnny O'Connell himself, combining his professional driving skills and the engineering expertise of aFe. The kits feature a CNC-bent, 4130 chromoly 35mm front bar and a 3-way adjustable rear bar in Johnny O's signature yellow. Also included are front and rear shocks, polyurethane bushings, heavy-duty 1/2 in. rod end links, and articulation spacers. To improve your car's suspension, you don't have to be a race car driver. Optimize your Vette's handling with added control and smoother, faster cornering. A Stage 1 suspension package from aFe will have you running just as masterfully at the track as it will around town.

5.0 out of 5 stars ( 2 )

$1,766.00

Homak 54 in. TECH Series Rolling Cabinets

Homak 54 in. TECH Series rolling cabinets are the perfect shop box. These stainless steel units feature a power drawer with a power strip that includes four electric outlets and two USB ports to efficiently charge and store your power tools and equipment in one place. The stainless steel work surface is durable enough to handle the tough and dirty jobs your projects require. TECH tool chests are outfitted with an HMC High Security Tubular Locking System and lift latch drawer pulls to prevent drawers from accidentally opening during transportation—keeping both you and your tools safe and secure at all times. Each drawer is fitted with non-slip PVC drawer liners to customize your tool storage and to keep tools from scratching and sliding. Smooth, removable ball-bearing drawer slides hold up to 100 lbs. per slide pair and keep tools easily accessible. The rolling tool chests have two swivel locking and two fixed 5×2 in. casters, providing stability and easy maneuverability around the workshop. Each caster has a weight capacity of 520 lbs. to give you the maximum storage capacity. Additional details: * Available in three bold colors: Midnight Black, Rally Sport Blue, and Fury Red * Constructed from 19-gauge steel, 1mm thick * Seven drawers with replaceable ball-bearing slides have a 100 lb. weight capacity per slide pair * Bold UV protective high-gloss powdercoat finish provides a sleek look to the overall design * Heavy-duty rubber grip steel push handle provides comfortable grip and easy maneuverability * Full-length black aluminum lift latch drawer pulls prevent drawers from opening and provides hassle-free access to tools

Not Yet Reviewed

$1,573.99

March Performance Chevy LS Series Serpentine Kits

March Performance Chevy LS Series serpentine kits offer an exciting new look when mounting an accessory drive in your vehicle. They're designed for vehicles that do not have air conditioning. The driver side features a remote power steering pump with an attractive aluminum cover, while the passenger side has March's own billet alternator (except where noted). An OEM-style tensioner ensures perfect belt tension. All pulleys and brackets are CNC-machined from 6061-T6 aluminum for strength and perfect fit—and hard-coated on high wear areas for durability. Order the kit recommended for your vehicle. LS Series kits include: * Aluminum water pump * March billet alternator (except where noted) * Alternator pulley with fan * Water pump pulley with nose cover * Alternator bracket * Polished spring-loaded belt tensioner with cover * Crank pulley (required adapter sold separately) * Mounting hardware Kits with power steering include: * Type 2 remote power steering pump * Billet pump case * Power steering pulley with nose cover * Mounting hardware

5.0 out of 5 stars ( 1 )

$1,694.99

March Performance Style Track Serpentine Systems

March Performance Style Track serpentine systems are created with a combination of high style and low price that will find favor among car enthusiasts everywhere. The systems have a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. Nearly 150 models are available, designed for fitment on specific applications. Assembly options include with or without power steering pump or A/C compressor; crankshaft pulley finish; bolt hole quantity; and water pump material. Order the replacement serpentine system recommended for your vehicle.

3.94 out of 5 stars ( 54 )

$1,571.99

—

$1,885.99

March Performance Sport Track Chevy Serpentine Pulley Kits

These March Performance Sport Track Chevy serpentine pulley kits are designed for the budget-minded engine builder with the same quality and innovation as the normal March Performance kits. They are designed to mount the air conditioning low and on the passenger side for a compact and clean appearance. The serpentine pulley kits will eliminate belt throwing and offer no-slip operation. These March Performance Sport Track Chevy serpentine pulley kits are manufactured from 6061-T6 billet aluminum and are available in black or silver powdercoated finishes.

3.76 out of 5 stars ( 58 )

$1,540.99

—

$1,972.99

Billet Specialties Sport Trac Serpentine Systems

Billet Specialties Sport Trac serpentine systems bring value, style, and quality to your engine compartment. Sport Trac systems feature precision-machined brackets for flex-free operation, laser-straight belt alignment, and ease of installation. Each of the Billet Specialties brackets are finished in satin black powdercoat for a classic look, while the pulleys are hardcoat black anodized for durability, plus quality stainless hardware is used throughout for superior corrosion protection. Starting off with a strong foundation ensures quality; Billet Specialties Sport Trac serpentine systems are completed with the best components for reliability and long life. Sport Trac serpentine systems include: * 170 amp one-wire alternator * AC Compressor * Aluminum power steering pump and reservoir * Power steering hard line for pressure side * Tensioner * 6-rib serpentine belt * Precision-machined brackets and pulleys * Precision-machined AC compressor manifold

Not Yet Reviewed

$1,651.95

Eddie Motorsports Raven Series V-Drive V-Belt Pulley Drive Systems

Tough, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports Raven Series V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Anodized or powdercoated systems feature black semi-gloss enamel painted components and black fasteners. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.

3.0 out of 5 stars ( 4 )

$1,865.95

—

$1,997.95

All American Billet Serpentine Kits

All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.

4.0 out of 5 stars ( 16 )

$1,794.95

—

$1,965.95

Eddie Motorsports V-Drive V-Belt Pulley Drive Systems

Tough, shiny, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM Type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Polished or clearcoated systems use polished finished components. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.

4.5 out of 5 stars ( 2 )

$1,700.95

—

$1,953.95

Summit Bucks

S&S Cycle 131 in. Big Bore Kits

S&S Cycle 131 in. big bore kits are aimed at the Milwaukee Eight platform for 2017 and newer big twins—and open up a whole new level of performance for these engines. When paired with an S&S 4.625 in. stroker flywheel (sold separately), engine will be a true 131cubic inches. S&S builds their big bore kits and cranks to much tighter tolerances and with higher quality materials than the factory parts. If you're the proud owner of a Harley-Davidson® Milwaukee Eight big twin and have been waiting for just the thing to boost your M8's power—the wait is over! The S&S Cycle piston/cylinder kits will be a solid platform for massive power! Features and benefits: * Huge displacement increase means huge power increase * Bolt-on kit works with stock crankcases * 4 1/4 in. bore cylinders with a new 11:1 forged piston design * Original engine serial numbers are retained * Powdercoat finish match factory finish, giving the bike a "sleeper" advantage * Includes .045 in. multi-layered steel head gaskets * Retains stock engine height * Includes 131 in. Cam Cover Badge * Available with or without highlighted fins Note: This kit must be used with S&S Cycle stroker flywheels to achieve 131 in. displacement (P/N: 320-0605, 320-0620).

Not Yet Reviewed

$1,559.95

136 Results Found For "Engine Power Black and Blue 347"