Availability
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$1,634.76
Specifically engineered for late model Nissan and Infiniti applications, these Nitrous Express dual nozzle nitrous systems make it easy to improve the performance of these rides. Nitrous Express Nissan/Infiniti dual nozzle nitrous systems include an Autolearn TPS switch that allows the nitrous to activate only at wide-open throttle. There's no need to cut your factory fuel lines--a direct plug-in fuel line adapter is provided to simplify the installation! With no additional jets, Nitrous Express Nissan/Infiniti dual nozzle nitrous systems can produce up to 300 wheel horsepower! Included in these kits are: * Lightning series fuel and nitrous solenoids * Two Shark nozzles and adapters * Bottle * Extra-long stainless braided N2O line * Stainless bottle brackets * Master arming switches * Relays * Relay harnesses * Jetting * All necessary installation hardware
( 1 )
$1,997.42
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage III kits come complete with a high-output pump, 3 qt. reservoir, nozzle, boost/RPM activated progressive controller, switch, hardware, and detailed instructions. Water has always been used to cool motors down, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
Not Yet Reviewed
$1,628.74
Specifically designed for drive by wire vehicles, these Nitrous Express Fly By Wire single nozzle EFI nitrous systems use exclusive "smart box" technology that enables the average auto enthusiast to install them with no hassles. Their simple plug-and-play design makes the Nitrous Express Fly By Wire single nozzle EFI nitrous systems the ultimate add-ons for your late model vehicle. Features include: * Your choice of bottle size * Nitrous Express Autolearn TPS switch * Stainless steel bottle brackets * Lightning solenoids * Stainless steel braided nitrous oxide lines * All necessary mounting hardware
Not Yet Reviewed
$1,800.74
The new Nitrous Express Dominator Assassin Plate Stage 6 nitrous system is the most technically advanced single-stage plate ever designed. A unique perimeter spray pattern assures you perfect nitrous-fuel distribution. It solves problems commonly found on single-plane manifolds, particularly small and big block Fords. This new innovation provides superior distribution and outstanding atomization. With no spray bars to sag, split, block airflow, or damage, this is truly the Next Generation in nitrous plate technology. Select the model with options needed for your application. This system includes: * Jetting for 50, 100, 150, 200, 250, and 300 hp * Billet aluminum and carbon fiber lightning solenoids * Heavy-duty 40 amp relay * -4 AN supply line * Billet aluminum Y-fittings * Stainless braided solenoid-to-plate lines * Systems with a bottle include stainless bottle brackets and Lightning 500 bottle valve * Fits standard Dominator flange carburetors
( 1 )
$1,940.28
—
$1,963.37
The Nitrous Express new Dry Direct Port systems provide nitrous directly into each cylinder through a set of high-flow NX dry nozzles. These systems are designed to be used with an engine management system that can add nitrous enrichment fuel through the engine's injectors. You'll receive nitrous jets for 75, 150, 225, 300, and 375 hp—and a tech card with pound-per-hour flow data for each jet setting, so you can easily configure your EMS nitrous settings. These NX dry nitrous systems include your choice of 1/8 or 1/16 NPT dry nozzles, two .093 lightning solenoids per stage, wide-open throttle switch, stainless bottle brackets, -4 AN stainless braided line, relay with harness, and all necessary hardware to complete the installation. Select the model with bottle size and material you prefer.
Not Yet Reviewed
$2,081.50
Nitrous Express is proud of its new Assassin plate system—the most technically advanced single-stage plate ever designed. The unique perimeter spray pattern assures you perfect nitrous-fuel distribution. It solves problems commonly found on single-plane manifolds, particularly small and big block Fords. This new innovation provides superior distribution and outstanding atomization. With no spray bars to sag, split, block airflow, or damage, this is truly the Next Generation in nitrous plate technology. The system is available in Dominator 4150 Series or 4500 Series plate delivery style. Order the model and options preferred for your application. This system includes: * Jetting for 100, 200, 300, 400, and 500 hp * Billet aluminum and carbon fiber Lightning solenoids * Heavy-duty 40 amp relay * -6 AN supply line * Billet aluminum Y-fittings * Stainless braided solenoid-to-plate lines * Systems with a bottle include stainless bottle brackets and Lightning 500 bottle valve * Fits standard Dominator flange carburetors
Not Yet Reviewed
$2,026.89
—
$2,049.99
For drag racing applications, you need a big turbo to make big power, but along with the big power comes a big problem--turbo lag. These Nitrous Express InstaBOOST EFI nitrous systems have the cure for turbo lag woes. They are uniquely configured to come on strong to eliminate that dreaded turbo lag, but then ramp out the nitrous smoothly to let the mighty turbo do its thing. The end result is monster power with zero lag, even with a huge turbo. The Nitrous Express InstaBOOST EFI nitrous systems feature an adjustable 1-8 psi pressure switch to control the nitrous flow--it's sure to have you out of the hole faster than ever.
Not Yet Reviewed
$2,099.95
Nitrous Express offers a complete line of conversion kits for all of their systems, including these Hemi plate conversion kits. They're designed to fit Hemi throttle bodies, including Challenger, Chrysler 300 Dodge Rams and Chargers with the 5.7L-6.4L Hemi engines. The plate bolts between the throttle body and intake, making installation quick, easy, and attractive. These kits include the aluminum conversion plate, longer throttle body bolts, braided stainless nitrous and fuel lines, as well as jetting for 50, 100, 150, 200, 250, 300, 350, and 400 hp. The system includes: * Jetting for 50-400 hp * 24 in. S.H.O. nitrous line * Rubber O-ring gasket * Dual stage capable throttle body nitrous plate (Plate is pre-machined with a second set of nitrous and fuel passages, so you can easily upgrade to a dual stage system by adding part number NX933D.)
Not Yet Reviewed
$1,526.47
—
$1,769.40
Nitrous Express 5th Generation Camaro plate nitrous systems provide the ultimate in distribution and atomization, due to their Phase 3 Spraybarless technology. These systems feature a billet plate that bolts between the intake and the throttle body for a simple and fast installation, with solenoids integrated into the plate for a clean look. Nitrous Express 5th Generation Camaro plate systems include jetting from 35 to 150 hp and may be upgraded to 200 hp with additional jets. A TPS Autolearn switch activates the nitrous only at wide-open throttle and automatically shuts it off when you let your foot off of the accelerator.
( 1 )
$1,834.75
—
$1,853.73
It used to be that big horsepower increases required major internal engine modifications. However, Nitrous Express has a way that's a whole lot easier--and cheaper. Just bolting one of their EFI single nozzle nitrous systems onto your domestic or import can add from 35 to 150 hp to a V8, with intermediate choices of 50, 75, and 100 hp (with a maximum of 75 hp for fours and sixes.) These systems rely on a Nitrous Express Shark performance nozzle and will work with standard fuel pumps, without any timing retard. The kits include the nitrous bottle, nozzle, hoses, solenoids, wiring, and mounting hardware.
( 2 )
$1,853.73
Nitrous Express has a nitrous system for people with carbureted vehicles whose high performance philosophy is "too much is almost enough." Their Pro Power plate systems crank out power in spades, from a 100 to as much as a 500 hp increase over stock at the wheels. The heart of these systems is the "Next Generation" Phase 3 distribution plate, which has no spray bars to sag, split, or disturb the airflow into the manifold. Race fuel is required for increases above 150 hp. The kits come complete with: * Nitrous bottle and stainless steel mounting brackets * Solenoids * Relay * Supply line and fittings * Switches * Wiring * Mounting hardware
( 2 )
$1,849.61
—
$1,889.79
Crank up the horsepower in your Mustang with Nitrous Express 5.0 Coyote plate nitrous systems. These systems feature a state-of-the art Phase 3 Spraybarless technology. The billet plate bolts between the throttle body and intake making installation quick and easy and it will not restrict airflow, while providing the ultimate in atomization and distribution, meaning more power for you. They have a clean, complete look by integrating the solenoids with the nitrous plate, while installation is made easy by using the direct plug-in fuel line adapter. Give your Mustang the extra power you desire with Nitrous Express 5.0 Coyote plate nitrous systems.
Not Yet Reviewed
$1,760.58
Nitrous Express GT500 nitrous plate systems feature a billet plate that's designed to fit between your throttle body and intake, making installation a breeze. They include aluminum and carbon fiber solenoids to give you ultimate performance, along with weight savings. They also include an NX fuel rail adapter for simple fuel system hookups, a TPS wide-open throttle switch, a 15 ft. nitrous feed line, a master arming switch, and everything else you could need for a complete high-quality installation. Nitrous Express GT500 nitrous plate systems come with jetting for 35 hp to 200 hp and can be purchased with a 5, 10, or 15 lb. bottle.
( 2 )
$1,957.35
Fear the power! Nitrous Express has combined heart-stopping acceleration and tire-ripping power in their 5.0 Coyote single nozzle systems. However, they didn't stop there. Nitrous Express also incorporated a super-clean look, easy installation, and the leading-edge technology to make your 5.0L Coyote engine scream! These systems include an Autolearn TPS switch, which allows the nitrous to activate only at wide-open throttle. A direct plug-in fuel line adapter is provided to simplify installation and eliminate the need to cut your factory fuel lines. The kits also include the jetting for 35, 50, 75, 100, 125, and 150 hp. Unbelievably, these systems can also be upgraded to power levels of up to 250 wheel horsepower! These kits are specifically designed for 2011 Ford GT Mustangs with the 5.0L 4-valve Coyote engine; a nitrous bottle may or may not be included and will vary per kit. The Nitrous Express 5.0 Coyote single nozzle systems will put the world in your rearview mirror and a smile on your face. These systems also include: * Billet aluminum and carbon fiber Lightning series solenoids * Patented Shark nozzle * Nozzle mounting adapter * Extra-long stainless braided nitrous oxide line * Stainless bottle brackets * Master arming switch * Relay * Relay harness * All necessary hardware to complete the installation
Not Yet Reviewed
$1,853.73
Nitrous Express C7 Corvette nitrous plate systems feature Spraybarless technology for the ultimate in atomization and distribution. These systems include a TPS Autolearn switch so the nitrous only activates at wide open throttle and automatically turns off when you let your foot off the accelerator. The billet plate bolts between the throttle body and intake, and the solenoids are integrated into the plate for a super neat and clean look. A direct-plug-in fuel line adapter is provided to simplify the installation, so there is no need to cut your factory fuel lines. Includes: * Includes jetting for 35, 50, 75, 100, 125, 150, 200, 250, and 300 horsepower. * Includes a stainless braided N2O line * Master arming switch * Relay * Relay harness * Necessary hardware
( 3 )
$1,849.61
With a Nitrous Express EFI dual stage nitrous system, you can head off two potential problems. One is the hassle of plumbing a port-style system in an already-crowded engine compartment. The simplicity of these systems neatly takes care of that. The other is the potential for overwhelming your vehicle's traction with too much power. The dual stage nature of these systems gives you a head start on that; plus, you can pick the power increase you get--in 25 hp increments--from 50 all the way up to 300 hp. The kits include the nitrous bottle, dual "Shark" nozzles, solenoids, an extra-long stainless braided nitrous supply line, solenoids, and all mounting hardware.
Not Yet Reviewed
$1,534.03
—
$2,246.45
The Nitrous Express 5.0 Coyote high-output plate nitrous system was designed to give you the ultimate in performance, quality and ease of installation. The foundation of the system is in the NX billet aluminum/carbon fiber Lightning Series solenoids and billet aluminum nitrous plate. Lightning Series solenoids are renowned for their reliability and innovative design that's proven to improve horsepower. The billet aluminum nitrous plates are built to provide the best atomization possible, increasing performance. Each system includes an AutoLearn TPS switch, allowing you to quickly and easily set up the switch to activate the nitrous at wide-open throttle. A direct plug-in fuel line adapter is provided to further simplify installation by connecting to the factory fittings; no need to cut the factory fuel lines. Also included in the kits are: the Nitrous Express Lighting 500 bottle valve, extra-long stainless braided N20 lines, stainless bottle brackets, and all necessary hardware for a professional installation. Maximize your Coyote's potential with a Nitrous Express 5.0 Coyote high-output plate nitrous system.
Not Yet Reviewed
$1,909.21
Nitrous Express Ford 2.3L Ecoboost nitrous plate systems feature spray bar-less technology for the ultimate in atomization and distribution. The billet plates bolt between the throttle body and intake, making installation quick and easy; while the solenoids are integrated into the plate for a super clean look. Nitrous Express Ford 2.3L Ecoboost systems are available with or without a bottle. Systems include: * Lightning Series integrated nitrous and fuel solenoids * Longer throttle body bolts * Braided stainless hoses * Billet nitrous plate * Fuel rail adapter * Direct plug-in fuel line adapter is provided to simplify installation--no need to cut your factory fuel lines * TPS Autolearn switch--so the nitrous only activates at WOT and automatically turns off when you let your foot off the accelerator * Jetting for 35, 50, 75, 100, 125, and 150 hp * Master arming switch * Relay * Relay harness * All necessary hardware to complete the installation * Systems with a bottle include the new billet aluminum Lightning bottle valve and stainless bottle brackets
Not Yet Reviewed
$1,760.59
Nitrous Express Mopar plate nitrous systems feature Phase 3 Spraybarless technology for the ultimate in atomization and distribution. Their plate bolts right between the throttle body and the intake, making installation a breeze. They include Lightning series nitrous and fuel solenoids, as well as a wide-open throttle switch so that the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the gas. These systems also include jetting from 35 to 150 hp and can be upgraded to 250 hp with additional jets. A 10 lb. bottle, braided stainless lines, stainless bottle brackets, and an arming switch, as well as every nut, bolt, and electrical connector needed also come with the kits to give you everything you need for a complete installation.
( 2 )
$1,704.73
—
$1,765.57
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
