Availability
These Chevrolet Performance deluxe serpentine belt drive kits include the following parts for installation. Kits include: * Belt (water pump, alternator, and power steering) * A/C belt (where applicable) * Tensioner assembly * Idler pulley * Power steering pump * Alternator and power steering pump bracket * Power steering pump brace * Power steering pump pulley * Alternator
( 1 )
$1,742.45
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
( 1 )
$1,717.22
Chevrolet Performance Parts LS controller kits have everything that you need to properly tune your Chevrolet Performance Parts crate engine. Kits include: * ECU * Engine wiring harness * Mass airflow meter * Mass airflow meter mounting boss * Accelerator pedal assembly * Two oxygen sensors with mounting bosses * Detailed instruction sheet
( 1 )
$2,167.43
These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet Performance automatic transmission controllers are fully programmable for upshift, downshift, part throttle and wide-open shifts, and shift firmness. They come preprogrammed--just enter your rear tire diameter and rear axle ratio and go, or create your own custom shift characteristics. Chevrolet Performance automatic transmission controllers were originally developed by GM Racing for off-road truck racing. They have the ability to record and graph drag racing data like time, speed, shift point, engine rpm, and more.
( 1 )
$1,812.27
—
$2,100.48
Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.
( 1 )
$2,167.43
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
Chevrolet Performance has taken the hassle out of transmission installation. Clutch kits are available on their own, or with other key components you need to complete the job more easily. Choose the kit that's appropriate for your particular transmission—and experience a faster installation utilizing the quality Chevrolet Performance parts included.
( 2 )
$1,713.45
If you're looking for more horsepower and torque for your engine, Chevrolet Performance Vortec top end kits may be just the ticket! These kits are available for a variety of engines, and each kit is comprised of all the pieces and part components you need to get the job done. Order the Chevrolet Performance Vortec top end kit recommended to fit your engine model.
Not Yet Reviewed
$1,790.68
Chevrolet Performance Bowtie aluminum cylinder heads offer an ideal combination of street drivability and drag-strip performance. These aluminum cylinder heads provide a broad power range with ample low-end torque, along with excellent throttle response, good mid-range torque and enough top-end power to beat your competitors to the finish line. Designed for high performance applications, the Bowtie Street cylinder heads are manufactured to precise machining tolerances, with thick deck surfaces and high-velocity airflow passages. They are available in either rectangular or oval intake port configurations. The rectangular intake ports are larger in volume and have been designed to enhance high-rpm horsepower, which makes them best for vehicles that see frequent drag-strip action. Cylinder heads with oval intake ports are smaller in volume and designed for greater low-rpm torque, therefore they're best for street applications, where lots of bottom end, off-the-line power is desired. Bowtie Street Cylinder Head Technical Notes: * Made from 356-T6 aluminum * Available in rectangular or oval-port designs * Will work on Mark IV and Gen V, VI blocks * 9/16 in. thick decks * As-cast intake and exhaust ports * No heat risers * 1.55 in. valve spring seat diameter * Heli-coiled 7/16 in. screw-in rocker stud holes * Designed for use with 3/8 in. pushrods * Use intake gasket P/N 12366985 and bolt kit P/N 12367959 * Use head gasket P/N 12363414 for bores to 4.370 in. and P/N 12363413 for bores 4.470 in. to 4.540 in. (Mark IV) * Use head gasket P/N 12363412 for bores to 4.370 in. and P/N 12363411 for bores 4.470 in. to 4.540 in. (Gen V, VI) * Use head bolt kit P/N 12367779 Bowtie Oval-Port Aluminum Cylinder Head Assembly: * Completely assembled with 2.250 in./1.880 in. 11/32 in. stem valves * 290cc oval intake ports * 110cc exhaust ports * 110cc combustion chambers Cylinder head is assembled with the following components: * 2.190 in. intake valves * Valve spring retainers * 1.880 in. exhaust valves * Valve locks * Valve springs * Valve seals * Valve spring shims * Rocker arm studs * Pushrod guideplates
Not Yet Reviewed
$1,685.52
Chevrolet Performance SuperMatic transmission control systems make it easy to connect and cruise. These controller kits complement the ready-to-run convenience of your crate engine with plug-and-play operation. There is no additional wiring, and the leads are clearly marked to link up with the engine control harness. SuperMatic control systems are pre-programmed to provide full-function transmission operation after completing the connections. No laptop programming is required. Chevrolet revised the systems with a more compact design for a headache-free installation with your carbureted small block, big block, or ram jet engine—and they're compatible with OBDII code readers. Get in gear with the simplicity and improved shift performance offered by Chevrolet Performance SuperMatic transmission control systems.
Not Yet Reviewed
$2,120.96
These Chevrolet Performance 430 HP LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or musclecar.
Not Yet Reviewed
$2,167.43
Chevrolet Performance LSX-SC cylinder heads are developed for big-boost levels and high-horsepower engines. Undergoing a Hot Isostatic Pressing (HIP), this process is a way of casting that removes the air pockets while improving the mechanical properties of the components. LSX-SC cylinder heads are the same ones you'll see on Chevrolet's COPO 350 engine. They're available in three different configurations: as-cast; bare with CNC-machined features; or fully assembled CNC-machined cylinder heads complete with valves and springs. Features and benefits include: * Signature LSX 6-bolt head-clamping pattern * Increased deck thickness from 0.650 in. to 0.750 in. * Exhaust face thickness increased from 0.177 in. to 0.300 in. * Dense T356 aluminum material
Not Yet Reviewed
$2,203.43
Great cylinder head airflow is yours with Chevrolet Performance LSX cylinder heads. With power-building attributes, these aluminum heads are manufactured from 319-T5 aluminum alloy and assembled with premium lightweight hollow-stem valves, sodium-filled exhaust valves and--on some models--titanium intake valves. Ensure maximum airflow and exceptional performance with Chevrolet Performance LSX cylinder heads.
Not Yet Reviewed
$1,824.30
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
