Free Shipping on Orders Over $125 at Summit Racing

Griffin Exact Fit Radiator Combos

Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.

4.02 out of 5 stars ( 95 )

$1,310.00

Summit Racing™ LS Turbocharger Manifold and Crossover Kits

Summit Racing™ LS Turbocharger Manifold and Crossover kits provide premium components and accessories, carefully matched, to successfully reach your power and performance target. These kits use either Hooker or Summit Turbo manifolds and crossovers to allow you to mount a T-4 turbine sized turbo on your LS based engine. The kits include premium manifolds, gaskets, and hardware. Check out Kit/Combo contents tab for the components list.

Not Yet Reviewed

$1,171.88

—

$1,250.88

DeWitts Dual 11 in. Brushless Fan Kits

DeWitts dual 11 in. brushless fan kits were a result of a collaboration between DeWitts and Spal USA. Featuring a sleek, computer-designed ballistic injection molded shroud and two Spal Plus Series brushless fans, these systems move a combined 2,884 CFM, making them ideal for extreme performance demands and high-heat environments. They are direct-fit replacements for Spal dual brushed fan kits, sharing the same bolt pattern for quick and easy installation. Spal brushless fans were developed and designed with cutting-edge technology, high-energy ferrite magnets, and a state-of-the-art sine wave sensor-less drive. These motors reach more than 82 percent electrical efficiency, placing the 300-watt power range products among the most efficient motors anywhere. The result is high air-side performance at minimum electrical load. The brushless motor is fully sealed to be IP68 and IP6K9K compliant (water and dust proof) and can operate in the presence of many aggressive or hazardous substances. Each DeWitts kit includes everything needed: fan, harness, jumper, temperature sensor, and flaps. Additional features: * Quiet pulse-modulated variable speed operation * Fits any crossflow radiator with mounting tabs * Wiring requires no harness or computer modifications * Low amp draw soft start technology with 175 degrees on and variable to 205 degrees full speed

Not Yet Reviewed

$1,499.99

Callies Compstar Connecting Rods

Better by design, Callies Compstar connecting rods offer high performance and a trouble-free engine build. Concerns about out-of-round, big-end bore sizing, repeatability, time-saving details, and upgrade costs are a thing of the past. Their forged 4340 steel rods are put through a lengthy stress-relief process and burnishing of threads and bolt spot faces to ensure dimensional repeatability, no matter how many times rods are torn down and reassembled. Pin bushings are chamfered and honed, parting line edges are generously chamfered, and bearing locating tab slots are deburred, all in an effort to save you time and trouble. ARP 2000 bolts and stroker clearances are standard with Compstar rods. Choose either their original H-beam design or heavy-duty I-beam designed rods. For high performance use right out of the box, plus value and peace of mind, try Callies Compstar connecting rods.

4.85 out of 5 stars ( 20 )

$1,120.00

All-Pro Off-Road APEX Front Bumpers

All-Pro Off-Road APEX front bumpers are designed to meet your demands for durable, low-profile bumpers that look as good as they function. These All-Pro Expedition bumpers, dubbed APEX for short, are available in lightweight aluminum and steel versions with hoop options for multiple lighting configurations. All-Pro Off-Road APEX front bumpers ready your rig with rugged armor and appeal that will illuminate any excursion you undertake. Features and options may include: * CNC laser-cut, brake-formed, and MIG-welded 1/4 in. thick aluminum plate or 3/16 in. steel plate * Two beefy 1 in. thick recovery points made from 1.5 in. x .250 wall tubing welded to thick plates * Two 4 in. light mounts are built-in * Ideal for trucks running 35 in. or larger tires and requiring winch and light mounts * Integrated recover points * Ships bare steel or aluminum * Includes mounting hardware and lower valance * Aluminum is almost 50 percent lighter than steel version * Improved approach angle and ground clearance * Optional LED hoop gives space to mount a small light bar * Optional center hoop is tall enough to offer grille protection, as well as providing two additional light mount tabs * Optional full hoops option includes the center hoop and headlight hoops for the highest level of protection (not available for all versions) * Heavy-duty winch mounting (not available for all versions) * Lower valance (not available for all versions) * All-Pro IFS skid plates attach directly to these bumpers

3.5 out of 5 stars ( 2 )

$1,299.99

—

$1,499.99

Peterson Fluid Systems R4 Oil Pumps

Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section

4.5 out of 5 stars ( 2 )

$1,099.99

—

$1,499.99

RC Components Hammer-S Eclipse Prism Gloss Black Wheels

RC Components Hammer-S Eclipse Prism gloss black wheels combine showmanship and strong but lightweight components for SFI 15.2 performance. The front race wheels are one-piece forged from 6061 T-6 aluminum. The rims and spoke faces are gloss black anodized, while the milled spoke edges are polished for long-lasting protection. The rear race wheels use tabs to interlock the 6061 T-6 forged centers in place, putting the majority of the torque on the middle section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum beadlock rings. Look like a winner with RC Components Hammer-S Eclipse Prism gloss black wheels.

Not Yet Reviewed

$1,070.00

QA1 HD Pro Rear Drag 4-Link Systems

QA1 HD Pro rear drag 4-link kits are built to put down serious power! Streamlining the fabrication process, these systems deliver professional-grade results and performance in a convenient, easy-to-order kit. They are designed for the hardcore, discerning, do-it-yourself racer looking for a no-compromise solution to take their vehicle to the next level in performance and adjustability. Offered with or without QA1's MOD Series 4-way adjustable coilover shocks, or 7 in. travel, track-proven single or double adjustable coilover shocks, each kit contains high-quality, MIG-weldable components to ensure a safe and properly engineered design that can be easily adapted into many drag racing setups. A components kit is also offered without coilover shocks and lateral locating device. Find convenience, safety, and performance all in a QA1 HD Pro rear drag 4-link system. Select the kit best suited to your drag race suspension setup. Features, benefits, and contents: * Drag race-style 4-link design: -- Performance and adjustability -- Wide range of instant center tuning and on-car adjustability -- Components can be cut to length -- 40 in. or narrower frame rails * 1/4 in. thick plates * 1 1/4 in. diameter, 22 in. length trailing arm tubes * Grade 8 hardware * QA1 chromoly rod ends * 40 in. shock crossmember and mounting tabs * 40 in. diagonal link kit with mounting brackets (not in components kit)

Not Yet Reviewed

$1,323.95

RC Components Hammer Eclipse Prism Gloss Black Wheels

The days of boring SFI 15.2 race wheels are over! RC Components Hammer Eclipse Prism gloss black front race wheels are one-piece forged from 6061 T-6 aluminum for strength and trueness. These stylish 10-spoke rims have oblong windows, accents transitioning to the outer rim edge, and rank among the lightest wheels in the industry. The rear race wheels use tabs to interlock the 6061T-6 forged centers in place, putting the majority of the torque on the middle section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum inner nubby beadlock rings. With black anodized and polished aluminum finishes, incredible materials, and a wicked race car, RC Components Hammer Eclipse Prism gloss black wheels are sure to please.

Not Yet Reviewed

$1,015.00

—

$1,135.00

Johnson's Hot Rod Shop Front Radius Rods

Johnson's Hot Rod Shop front radius rods feature modern, vintage-styled designs that take the age-old design of split wishbones to new heights. These radius arms fit OE and aftermarket Ford-style I-beam axles with a standard 2.25 in. perch boss. Manufactured from T6061 aluminum and available in machined or show-polished finishes, they measure 33.25 in. center-to-center with the correct caster angle built-in. Johnson's front radius rods are sold in kits and come complete with two radius rods, hardware, and frame tabs to attach to the frame rails. A variety of distinct styles are available, along with optional matching rear ladder bars (sold separately). All deliver superior strength and clean lines for your hotrod. For custom applications, please call to inquire about lengths and styles.

5.0 out of 5 stars ( 2 )

$1,295.00

—

$1,395.00

Fishbone Offroad Front Winch Bumpers

Give your Chevy/GMC truck a utility upgrade with one of these sturdy Fishbone Offroad front winch bumpers. They accept a winch (up to 12,000 lbs. rating), include interior tabs for wire management, accept standard 3x3 pod lights, and feature a retaining door that allows access to the winch controls. If you decide not to install a winch, there's plenty of space below your grille for accent accessory lights! Whichever way you roll, the black, powdercoated steel of a Fishbone Offroad front bumper will help turn your truck into a workhorse adventure machine with a style that matches!

Not Yet Reviewed

$1,099.99

Summit Racing™ Large Tailgate Bundle

Summit Racing™ large outdoor bundles let you save time and money by ordering a complete package that's ideal for tailgating, picnics, camping, vacation travel, and more. These all-inclusive bundles include a pop-up canopy tent, four adjustable folding rocking chairs, a fold-up cooking station, 45-quart cooler, folding wagon, and cornhole game. Just add food and beverages for fun with family and friends! Click the "Kit/Combo Contents" tab above for details on each of the items contained in the bundle.

Not Yet Reviewed

$1,109.98

RC Components Hammer Eclipse Gloss Black Wheels

RC Components Hammer Eclipse gloss black wheels combine anodized and machined aluminum finishes for outstanding looks. They're available in a variety of offsets and are SFI 15.2 certified. The front race wheels are one-piece forged from 6061-T6 aluminum for strength and trueness. These stylish 10-spoke rims have oblong windows, accents transitioning to the outer rim edge, and they rank among the lightest wheels in the industry. The rear race wheels use tabs to interlock the 6061 T-6 forged centers in place, putting the majority of the torque on the middle section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum inner nubby beadlock rings. For all-encompassing performance, order a set of RC Components Hammer Eclipse gloss black wheels.

5.0 out of 5 stars ( 3 )

$1,020.00

—

$1,420.00

Aries Automotive TrailChaser Front Bumper with Corner Guards, Brush Guards and Fender Flares

Aries Automotive TrailChaser bumpers are unlike any other bumper for the Jeep Wrangler JL because they feature a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular front bumper and fender flare kit includes the bumper center section, corner end caps, tubular or angular center brush guard, and front fender flares. The bumper corners feature unique cutouts to integrate the Jeep JL fender flare turn signals when installing the Aries fender flares. The Jeep fender flares feature a flat profile that is specifically designed to show off larger, off-road tires. They're constructed from lightweight, rust-free aluminum or 3/16 in. carbon steel—each with a textured black powdercoat finish to maximize corrosion resistance and help hide minor scratches and grime. This bumper also features a standard winch housing and provides mounting points for additional LED lights, D-rings and tow hooks. Additional details: * All Aries TrailChaser bumpers install using pre-existing factory mounting points for fast, easy installation with no drilling required * Modular pieces can be added or removed as desired to change the look any time * Bumper provides cutouts for integrating Jeep JL fender flare turn signals * Additional bumper cutouts and mounting tabs for OE lights and aftermarket LEDs * Center brush guard provides two light mounting tabs and extra winch protection * Narrowed fender flares allow for greater clearance with larger, off-road tires * Pre-drilled holes for anti-rattle D-rings and tow hooks * 22 1/2 in. x 7 3/4 in. winch housing (adapter 2072100 required for larger winches) * Front and rear bumpers and fender flares available

Not Yet Reviewed

$1,266.99

—

$1,388.99

LoD Offroad Destroyer Series Bumpers

LoD Offroad Destroyer bumpers are available for front or rear of your Jeep, and rear of your Bronco in shorty to full-width versions. Many of the front bumpers are winch-ready and offered with or without a bull bar or stinger guard, while the rear Destroyers are light-ready and will include blank bezels to fill in the light housing cavities. Engineered to a higher level, LoD Offroad Destroyer bumpers deliver a stealthy look and versatile functionality, while protecting and enhancing your off-road vehicle on the trail. They are fabricated with high-strength, lightweight military grade steel and finished with a durable powdercoat finish. And with the increased range of optional equipment available, you can customize your Destroyer to fit your needs. Better look, higher quality, and more options; choose the Destroyer bumper designed for your vehicle. Notes: * Destroyer front bumpers with bull bars have standard light bar tabs design to fit additional individual lights or a light bar up to 10 in. long. The tabs are located behind the guard tubing and are not visible from a direct front view. * Destroyer rear bumpers will work with the factory tire carrier and fits up to a 35 in. (Jeep) 37 in. (Bronco) tire comfortably. The tow hitch receiver is built into the rear bumper and is tow rated the same as the factory. Bronco rear Destroyer is also available with LoD tire carrier.

Not Yet Reviewed

$1,048.50

All-Pro Off-Road APEXG3N Front Bumpers

All-Pro Off-Road APEXG3N front bumpers fulfill customer demands for durable, low-profile bumpers that look as good as they function. They're ideal for trucks running 35 in. or larger tires and those requiring winch/light mounts. Notable features include two built-in 4 in. light mounts, an integrated 30 in. light bar mount, plus an optional center hoop providing excellent grille protection and two additional light mount tabs. Fearlessly enjoy your truck's improved approach angle and ground clearance with an All-Pro Off-Road APEXG3N front bumper. Refer to Application tab to confirm fitment. Features, items, and specs: * Available in steel or aluminum * Installation hardware is included * Heavy-duty winch mounting * 2 integrated, beefy 1 in. thick recovery points made from 1 1/2 in. x 1/4 in. wall DOM tubing welded to 3/8 in. thick plates

5.0 out of 5 stars ( 1 )

$1,299.99

—

$1,499.99

DV8 Offroad Toyota Tundra Spec Series Front Bumpers

DV8 Offroad's Toyota Tundra Spec Series front bumpers ensure you are prepared for every situation with off-road capabilities and high clearance design. The bumpers are designed to accept standard-sized heavy-duty winches and feature two D-ring mounts for multiple recovery options. The slim design and rugged steel construction provides a durable shield between your Tundra and the trail while complementing your truck's aesthetic. The welded-in zip tie tabs allow you to easily manage your lights wiring without sacrificing the look of the bumper. To fully illuminate any terrain, these bumpers have provisions to mount up to one 20 in. single or dual row light bar in the center and attach up to four 3 in. pod lights in the wings (light bar and pod lights sold separately). These bumpers also ensure that you don't lose any of your OEM capabilities. The adaptive cruise control, front camera, sensors, and fog lights will remain fully functional after the bumper is installed. Even the factory skid plate on all trim levels is compatible with this DV8 Offroad Spec Series front bumper and the OEM recovery points can be utilized or removed. Key features: * 3.5mm/5mm plate steel construction * Micro-textured black powdercoat finish protects the bumper from the elements * Bumper has a slim high clearance design * Accepts various standard sized heavy-duty winches (winch not included) * Bumper has provisions to mount one 20 in. single or dual-row light bar (DV8's Elite and Non-Elite, Baja Designs, and Rigid) All light bars sold separately * Bumper has provisions to mount (four) 3 in. pod lights (light not included) * Compatible with all trim levels * Mounts two 1 in. thick D-ring mounts that accept a 7/8 in. pin (3/4 in. shackle) * Welded-in zip tie tabs for wire management * Retains Factory skid plate * Compatible with Adaptive Cruise Control, sensors, front camera, and fog lights * All mounting hardware is included

Not Yet Reviewed

$1,099.99

Auto Metal Direct Grilles

Auto Metal Direct grilles are made out of high-quality materials and feature OE-quality finishes. All parts feature (depending on the application) correct-as-original clips, tabs, bends, and seams. Unlike other restoration grilles, these are precision-crafted and manufactured, creating a product that looks great and fits even better. Auto Metal Direct provides you with a fast and easy installation, as all parts are designed to be a direct bolt-on, utilizing OE brackets and hardware. Restore your classic to its former glory with Auto Metal Direct grilles.

3.67 out of 5 stars ( 3 )

$1,105.99

Auto Metal Direct Quarter Panels

Damaged or rusted quarter panels often need to be cut off and replaced. Auto Metal Direct quarter panels are manufactured from high-quality, proper gauge steel on AMD tooling for an authentic original appearance and precision fit. Each time a prototype body panel comes off new tooling, AMD test fits it on a car. The marked-up prototype is then used to change and improve the tools. The result is correct-as-original body lines, braces, marker light holes, clips, tabs, flanges, seams, and antenna cut-outs. All AMD quarter panels feature a black EDT finish for rust prevention and will require standard prep work prior to painting. Whether you're doing restoration work or rust repairs, Auto Metal Direct quarter panels will make your ride like new again.

4.24 out of 5 stars ( 127 )

$1,209.99

Sikky Manufacturing LSX Swap Pro Series Headers

Sikky Manufacturing LSX Pro Series swap headers allow perfect drop-in fitment. Designed around using the Sikky mount kits and components, these headers are for those who want the very best. With no expense spared in their design and construction, Pro Series headers will make great power and last forever. Check the Applications tab to ensure proper fitment. Features include: * 100 percent stainless steel construction * CNC-mandrel bent 1 7/8 in. primaries * High-flow collectors with merge bullets * CNC-machined head flanges * V-band flange welded to the collector (other half and clamps included) * TIG-welded and back purged for strong and reliable welds * Works with any transmission combination (most, but not all header options) * Gaskets and bolts (not with all headers) * Welded Sikky badge

Not Yet Reviewed

$1,276.79

On Sale

Artec Industries Toyota Tacoma 3G Venture Series Rear Bumpers

Get ready for the toughest challenges with Artec Industries Toyota Tacoma 3G Venture heavy-duty rear bumpers that provide extra skid plate protection. They replace the factory rear bumper of your 3rd generation Toyota Tacoma, utilizing a high-clearance design that hugs the frame, providing a better departure angle. Artec Venture rear bumpers are available in two finishes, select between bare steel or black textured powdercoat. Additional features: * CNC machined steel components * Engineered using 3-D scan files * Skid plates are made from aluminum and protect factory backup sensors * Countersunk skid hardware prevents bolts getting hung up on rocks * 3/4 in. thick recovery tabs located higher for better ground clearance * Integrates with factory hitch and includes LED license plate lights * Includes slotted step plate for grip and large frame plate gussets * Easy installation with press nuts included

Not Yet Reviewed

$1,237.49

$1,051.87

RC Components Torx Eclipse Gloss Black Wheels

With split 5-spoke designs, milled windows, and SFI 15.2 certification, RC Components Torx Eclipse gloss black wheels are rolling wonders. The front race wheels are one-piece forged from 6061 T-6 aluminum for strength and trueness. The outer lip is branded for bragging rights. The rear race wheels use tabs to interlock the 6061 T-6 forged centers in place, putting the majority of the torque on the middle section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum beadlock rings. High-quality materials and an incredible finish come standard with your new RC Components Torx Eclipse gloss black wheels.

4.83 out of 5 stars ( 6 )

$1,480.00

RC Components Hammer Polished Wheels

RC Components Hammer polished wheels are great for blinding your opponents and bringing extra attention to your race car. They have oblong windows in each of their five spokes, are available in a variety of offsets, and are SFI 15.2 certified. Front race wheels are one-piece forged from 6061 T-6 aluminum for strength and trueness and rank among the lightest wheels in the industry. The rear race wheels use tabs to interlock the 6061 T-6 forged centers in place, putting the majority of the torque on the center section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum inner nubby beadlock rings. For amazing strength, reduced unsprung weight, and extra shine, install RC Components Hammer polished wheels.

5.0 out of 5 stars ( 1 )

$1,380.00

QA1 Pro Rear Parallel 4-Link Systems

QA1's Pro Rear Parallel 4-Link systems with panhard bar kits simplify the fabrication process for vehicles that lack aftermarket suspension support—and offer an easy solution that provides ride height adjustability and a simple installation process. These DIY kits produce professional-quality results and great looks in a convenient package. Designed for the DIY enthusiast, each kit contains high-quality, MIG-weldable components that ensure a safe and well-engineered design that'll give your favorite truck or hot rod the stance and ride quality it deserves. The systems are available in three models: * Basic, with no shocks or springs * Single-adjustable, with coilover shocks (150 lb. spring rate) * Double-adjustable, with coilover shocks (150 lb. spring rate) ADAPTABILITY: Kits include all necessary components and hardware for assembling and mounting the trailing arms, shock mounts, and panhard bar. The raw components can be cut to length and welded as needed, allowing for seamless adaptation to a wide range of applications. PACKAGING and SIMPLICITY: The parallel 4-link system, by design, packages easily into many applications, making it an ideal solution where space is limited. The parallel 4-link system is easy to tune, making it a great choice for DIY mechanics while still meeting the demands of high-end builds. Powdercoated trailing arms with forged bushing ends offer great looks, durability, and offer a smooth, compliant ride. TUNABILITY and RIDE HEIGHT ADJUSTMENT: Adjustable coilover brackets provide ride height adjustment so you can tune in the perfect stance for your ride. The included panhard bar and adjustable trailing arms ensure you can fine-tune your axle position and pinion angle for proper function and control. KIT CONTENTS: -- Powdercoated trailing arms with forged bushings and provide adjustment from 24 5/8 in. to 25 1/2 in. in length -- Trailing arm axle brackets for 3 in. axle tubes -- Panhard bar max length 37 in. -- 40 in. trailing arm crossmember -- 40 in. shock crossmember and mounting tabs -- All required hardware -- NOTE: Single- or double-adjustable models also include coilover shocks

Not Yet Reviewed

$1,154.95

99 Results Found For "tab"