Free Shipping on Orders Over $109 at Summit Racing

Jesel Extreme Series Distributor Drive Kits with ICT

Jesel Extreme Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and the ability to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Extreme Series distributor drives also feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications.

5.0 out of 5 stars ( 1 )

$1,140.00

On Sale

MSD Pro-Billet Front Drive Distributors

MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.

Not Yet Reviewed

$1,126.95

Jesel Pro Series Distributor Drive Kits with ICT

Jesel Pro Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and are ideal for naturally aspirated engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Pro Series distributor drives also feature Gates PowerGrip HTD belts and use Moroso Ultra Series distributor components. The balanced brass rotor tip and form-staked carbon ball on the coil lug have been designed to eliminate grounding paths and crossfiring.

Not Yet Reviewed

$1,090.00

On Sale

MSD Chevy Crate Engine Ignition Kits

These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!

4.78 out of 5 stars ( 18 )

$1,024.95

AFR Stage 1 Camshaft, Lifter, and Valve Spring Kits

AFR's Stage 1 camshaft, lifter, and valve spring kits deliver their custom camshaft with a set of Morel OE or link bar lifters and valve springs, retainers, locks, locators, and seals to give your American muscle car the power it deserves. These kits also include a melonized distributor gear. Select the kit preferred. AFR Stage 1 camshaft benefits: * Specifically developed to unleash the full potential of AFR's Eliminator CNC and Enforcer As-Cast cylinder heads * Industry-preferred 8620 steel for superior strength and durability * Ideal for high-rpm builds, power-adder applications, and aggressive street use * Exceptional wear resistance for long-term valvetrain stability * Improved core hardness allows for more precise and consistent grinds * Excellent response to heat-treating for a hardened surface without sacrificing ductility Valve spring kit: * Pacaloy hydraulic roller springs made from premium grade chrome silicon * Steel 7-degree retainers * Machine hardened steel 7-degree valve locks with stock-style beadlock * Locator spring cups * Viton® rubber 8mm valve stem seals

Not Yet Reviewed

$1,358.00

On Sale

Holley Sniper EFI 2GC Large Bore Fuel Injection Systems

Holley Sniper EFI 2GC large bore fuel injection systems let you convert your classic 2GC large bolt pattern carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI. You can also use the Sniper EFI 2GC to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature two 100 lb./hr. fuel injectors capable of supporting 350 hp on naturally aspirated engines. The Sniper EFI systems are also available in a Master Kit option, which includes 20 ft. of fuel hose, two filters, one high-pressure EFI fuel pump, and all required fittings for a complete EFI fuel system conversion. Standard and Master Kit systems are available in a choice of throttle body finishes. Standard Sniper EFI system features: * Bolt-on 2GC large bore carburetor replacement * Universal throttle lever with TH350, 700R4 and 200-4R kickdown provisions * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control (with MSD Pro Billet, Holley Dual Sync, or Holley Hyperspark distributors) * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion for 1974-78 Chevrolet, GMC, Oldsmobile, and Pontiac vehicles that came with a Rochester 2GC large bore carburetor.

Not Yet Reviewed

$1,349.95

—

$1,649.95

$1,213.95

—

$1,483.95

AFR Stage 2 Camshaft, Lifter, and Valve Spring Kits

AFR's Stage 2 camshaft, lifter, and valve spring kits deliver their custom camshaft with a set of Morel OE or link bar lifters and valve springs, retainers, locks, locators, and seals to give your American muscle car the power it deserves. These kits also include a melonized distributor gear. Select your preferred kit. AFR Stage 2 camshaft benefits: * Specifically developed to unleash the full potential of AFR's Eliminator CNC and Enforcer As-Cast cylinder heads * Industry-preferred 8620 steel for superior strength and durability * Ideal for high-rpm builds, power-adder applications, and aggressive street use * Exceptional wear resistance for long-term valvetrain stability * Improved core hardness allows for more precise and consistent grinds * Excellent response to heat-treating for a hardened surface without sacrificing ductility Valve spring kit: * Pacaloy hydraulic roller springs made from premium grade chrome silicon * Steel 7-degree retainers * Machine hardened steel 7-degree valve locks with stock-style beadlock * Locator spring cups * Viton® rubber 8mm valve stem seals

Not Yet Reviewed

$1,358.00

MSD Pro-Billet Hall-Effect Cam Sync Distributors

If you're assembling an aftermarket EFI system, then these MSD Pro-Billet hall effect cam sync distributors are for you! They offer a magnetic pickup to trigger the ignition, and they now have a new hall-effect pickup to set up the cam synchronization for most EFI systems. The MSD Pro-Billet hall-effect cam sync distributors also feature a special built-in LED that illuminates when the sync signal is detected, making setup simple. In addition, the distributors include an adjustable slip collar for compensation in engines with modified deck heights or custom intake manifolds. The MSD Pro-Billet hall effect cam sync distributors' small diameter cap keeps the distributors low in the engine for extra clearance, and a ball bearing guides the QPQ-coated shaft for stable operation through high rpm.

3.0 out of 5 stars ( 2 )

$1,126.95

On Sale

Holley EFI Hi-Ram Intake Manifolds

Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings

4.5 out of 5 stars ( 2 )

$1,075.95

Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits

Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.

Not Yet Reviewed

$1,364.95

10 Results Found For "sbc distributor"