Free Shipping on Orders Over $109 at Summit Racing

BoostLine Connecting Rods

BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available

1.0 out of 5 stars ( 1 )

$1,099.99

—

$1,424.99

Scat Pro Sport H-Beam Connecting Rods

These H-beam connecting rods are the strongest Scat connecting rods available. These Scat H-beam connecting rods are perfect for supercharged and nitrous applications. These rods incorporate a special doweled cap for specific cap-to-rod alignment and are profiled with extra clearance for stroker applications.

4.81 out of 5 stars ( 42 )

$1,004.99

Callies Compstar Xtreme Connecting Rods

All the quality, reliability, and workmanship you have relied upon for years from the Compstar lineup is taken to the Xtreme--Callies Compstar Xtreme connecting rods. Specifically designed for power adder and diesel applications, these rods utilize the same proven 4340 material and ARP 2000 or L19 fasteners. Strength was added by thickening up the flanges of the H-beam and a reduced depth-of-cut towards the center of each rod, then non-essential weight is taken out of the beam to help keep the overall weight of these Xtreme rods in check. Choose a set for your high output, boosted application.

Not Yet Reviewed

$1,008.00

Howards Cams Ultimate Duty Forged Billet Connecting Rods

Howards Cams Ultimate Duty forged billet connecting rods start with certified high-nickel 4340 aircraft-quality steel and are fully CNC-machined on the newest generation of equipment to ensure the removal of all surface imperfections. They are specially heat-treated using a multi-phase process to produce the ultimate in strength and reliability. Then these Ultimate Duty rods are fully stress-relieved and shot-peened to ensure that no stress risers remain. Howards Cams Ultimate Duty Forged billet connecting rods are profiled for long stroke applications and weight savings. The rod caps are double-ribbed for added strength and the rod cap alignment sleeves will keep the bearing caps precisely aligned. The rods are bronze bushed for floating pins and use 7/16 in. ARP 2000 cap screw fasteners to secure the caps.

Not Yet Reviewed

$1,139.99

Manley Pro Series I-Beam Connecting Rods

Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually magnafluxed. They feature 7/16 in. ARP cap screws with 12-point heads and your choice of material grade to maximize your needed tensile strength! Manley Pro Series I-beam connecting rods are available in various sizes for a wide range of vehicles and horsepower ranges from 850 to 1,600 hp. Match up your specs, then order an individual rod or a larger set quantity.

Not Yet Reviewed

$1,028.90

Manley Pro Series I-Beam Turbo Tuff Connecting Rods

Manley Pro Series I-Beam Turbo Tuff connecting rods are assembled from high-quality 4340 forged steel. Every rod is fully machined to the highest standards, and the Turbo Tuff design combines the appropriate weight and rugged strength for ultimate horsepower utilization. Each rod is shot-peened after machining and individually magnafluxed. These connecting rods feature 7/16 in. ARP 2000 cap screws with 12-point heads for outstanding 200,000 psi tensile strength.

Not Yet Reviewed

$1,028.88

—

$1,319.86

Summit Racing™ Pro LS Piston and Rod Kits

Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control

4.84 out of 5 stars ( 19 )

$1,470.97

—

$1,499.97

Ford Performance Parts Hot Rod Camshafts

Ford Performance Parts engineers seem to eat, sleep, and breathe one thing: Blue Oval performance! Their selection of camshafts covers a variety of specific applications—from mildly modified street rods, to full-out drag race cars. These hot rod camshafts result in an engine with considerably more power, while retaining the function and advantages of the computer system. Ford Performance Parts designs dual-pattern cams for either low-to-mid rpm torque or mid-to-high rpm horsepower. Choose from among the options offered for duration, valve lift, and style—including hydraulic, solid, or hydraulic roller lifter. (Refer to Notes above for additional Hot Rod cam specs.)

5.0 out of 5 stars ( 11 )

$1,048.99

TeraFlex HD Tie Rod and Drag Link Kits

TeraFlex HD tie rod and drag link kits are built for punishment. Extreme conditions that normally would cause your factory steering components to bend and fail are where these kits will survive. They are designed and engineered to be strong and durable to take you through the terrain, over the rocks, and back home. Outfit your rig with TeraFlex HD tie rod and drag link kits. TeraFlex kits feature: * HD tie rod is 1.6 in. O.D. 4140 heat-treated chromoly * Forged tie rod end housing designed * Allows proper clearance for use with factory 17 in. wheels * Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housing * Adjustable preload tension to ensure proper long-term durability * Includes the clamp or the TeraFlex steering stabilizer relocation kit * The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the tie rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. * 1.25 in. O.D. fully forged drag link eliminates excess movement during hard steering maneuvers * Oversized DOM factory-style adjusting collar and pinch clamp for simple adjustments

4.25 out of 5 stars ( 4 )

$1,070.99

—

$1,110.99

Johnson's Hot Rod Shop Front Radius Rods

Johnson's Hot Rod Shop front radius rods feature modern, vintage-styled designs that take the age-old design of split wishbones to new heights. These radius arms fit OE and aftermarket Ford-style I-beam axles with a standard 2.25 in. perch boss. Manufactured from T6061 aluminum and available in machined or show-polished finishes, they measure 33.25 in. center-to-center with the correct caster angle built-in. Johnson's front radius rods are sold in kits and come complete with two radius rods, hardware, and frame tabs to attach to the frame rails. A variety of distinct styles are available, along with optional matching rear ladder bars (sold separately). All deliver superior strength and clean lines for your hotrod. For custom applications, please call to inquire about lengths and styles.

5.0 out of 5 stars ( 2 )

$1,149.00

—

$1,496.00

Hot Rods Crankshafts

Are you looking to replace a broken or worn-out crankshaft? Hot Rods crankshafts are sold with or without Hot Rods connecting rods and wrist pin bearings. These crankshafts are factory assembled and trued to OEM specifications. They avoid the additional machine work and extra parts typically required for long-stroke engines. Stroker crankshafts use stock pistons. Heavy-duty crankshafts utilize their heavy-duty connecting rods. Bolt in and go with these Hot Rods crankshafts!

Not Yet Reviewed

$1,018.35

—

$1,386.00

Hot Rods Complete Bottom End Rebuild Kits

When it's time to do a rebuild, Hot Rods complete bottom end rebuild kits are less expensive and longer lasting than OEM. These kits have all that you need to get back on track and are easy to put together. Each kit contains a crankshaft, main bearing/seals, and a complete gasket set. Water pump seals are not included. Great performance parts from Hot Rods will have you going, going, strong!

5.0 out of 5 stars ( 2 )

$1,014.01

—

$1,357.41

Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits

Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.

3.43 out of 5 stars ( 7 )

$1,034.95

Clearance

Hot Rod Innovations Easy Entry Slide Away Steering Kits

Hot Rod Innovations easy entry slide away steering kits are just what you need for your hot rod, rat rod, classic car, or truck. If you have a difficult time squeezing past the steering wheel, this kit is made for you. Upon opening the driver side door, this motorized system slides the steering column out of the way for easier entry and exit. Hot Rod Innovations designed this universal kit so you can install it in almost any vehicle. All you need is to supply the 2 in. diameter steering column and column drop of your choice. Hot Rod Innovations easy entry slide away steering kit includes: * Universal slide rail and motor assembly * Plug-and-play wiring harness * Firewall swivel

Not Yet Reviewed

$1,595.99

$1,164.50

Johnson's Hot Rod Shop Rear Ladder Bars

Vintage-styled, yet modern, Johnson's Hot Rod Shop rear ladder bars evolve the age-old design of rear radius rods to perfection. Their ladder bars firmly locate the rear-end housing of your hot rod while achieving a smoother ride and better traction under hard acceleration. The bars have been engineered for use on either a transverse Model A buggy spring, or a coilover rear suspension. Johnson's ladder bars are manufactured from T6061 aluminum with a machined or show-quality polished finish. They measure 42.75 in. center-to-center and are sold as a pair complete with hardware, weld-on rear end housing brackets, and a weld-on ladder bar crossmember for center K-members. A variety of distinctive styles are available, along with matching front radius rods (sold separately). Johnson's rear ladder bars deliver superior strength and clean lines for your hot rod.

Not Yet Reviewed

$1,354.00

AFCO Racing Street Rod Radiators

Whether your street rod is a custom setup or a restored original, AFCO has a radiator to meet your cooling needs! These street rod radiators feature lightweight, all-aluminum construction, and are TIG-welded with no epoxy, adding structural integrity and a clean, attractive look. AFCO street rod radiators are 100 percent pressure-tested and include a draincock. AFCO Racing street rod radiators are available for both manual and automatic transmissions, with size, finish, and inlet location options, order the radiator that is tailored for your vehicle application.

3.75 out of 5 stars ( 4 )

$1,050.99

—

$1,394.99

Classic Instruments 1957-60 Ford Truck Hot Rod Gauge Sets

Classic Instruments 1957-60 Ford Truck Hot Rod gauge sets are direct-fit packages that will add "the finishing touch" to your classic restoration. The sets are offered with a standard 4 5/8 in. speedometer or a Speedtachular, speedometer/tachometer combination gauge. Handcrafting gauges in America since 1977, Classic designs these clusters with shiny Hot Rod gauges that deliver a timeless white-on-black look and modern precision performance. Each package is equipped with Classic's ZST and built-in ECM signal filter switch, meaning it works directly with ECM or VSS signals, so there is no need for an additional control box. Additional features and benefits: * 2 1/8 in. fuel (75-10 ohm), oil, temperature, and volt short-sweep gauges * All necessary sending units, mounting bracket and hardware, and a speedometer wiring harness is included * Speedometer harness is constructed of automotive grade TXL wire, machine-crimped terminals, tech-flex sleeving, and Molex main connectors * A standard stud connection is used for the fuel, oil, temperature, and volt gauges * Gauge lighting is standard incandescent with the option to upgrade to LED lighting * Green turn signals are mounted in the housing, and a red high beam indicator is built into the speedometer via Classic's Halo lighting Please note: * Fuel sending unit not included as the fuel gauge is calibrated to stock 75-10 ohm * Factory bezel not included

Not Yet Reviewed

$1,024.95

Classic Instruments Hot Rod Series Gauge Sets

Classic Instruments Hot Rod Series gauge sets give tradition a fresh new look! Classic brings back the memories with their Hot Rod Series, a tribute to the early days of street rodding. They offer black and white, easy-to-read pool cue pointers and gleaming bezels--nothing fancy, just straightforward and clean. These precision gauge sets are available in many different prepackaged kits for you to choose from, including those with Classic's Duals and Quads. So, cuff your jeans, slick back your hair, and get ready to pick up your favorite sweater girl in your nostalgic street rod, complete with American-made Hot Rod Series gauges from Classic Instruments--the perfect finishing touch to your dash. Depending on the particular gauge selected, features may include: * Standard stainless steel low step bezel and flat glass lens * Wide variety of bezel, lens, and pointer upgrades available * Rugged air core motor combined with microprocessor technology for precision and durability * Choose full-sweep for increased accuracy; short-sweep for retro-style * Variety of sizes available * Push-button calibration * Integrated red warning light; illuminates entire gauge red when activated * Warning light output for additional warning indicator lights * Analog .5 to 4.5 V DC output for data logging systems * LED lighting, choose between warm white or cool white * Pressure transducer included * Installation hardware and wiring harness included

4.75 out of 5 stars ( 4 )

$1,449.95

Summit Racing™ Forged Crankshafts

Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.

4.1 out of 5 stars ( 10 )

$1,019.99

—

$1,194.99

Eagle Street Performance Rotating Assemblies with Silv-O-Lite Claimer Pistons

Eagle street performance rotating assemblies offer the perfect balance of strength, performance, reliability, and affordability. They include a cast steel crankshaft, Eagle "SIR" I-beam connecting rods, Silv-O-Lite claimer pistons, Perfect Circle rings, and Performance Street bearings. The kits are only available balanced. Eagle street performance rotating assemblies are the perfect choice for engines up to 500 hp. Order the model designed for your year, make, and engine application.

4.76 out of 5 stars ( 25 )

$1,205.99

—

$1,440.99

Eagle Street and Strip Rotating Assemblies

Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.

4.43 out of 5 stars ( 87 )

$1,187.99

—

$1,320.99

Scat Engine Rotating Assemblies

Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.

4.28 out of 5 stars ( 133 )

$1,067.50

—

$1,436.99

PSC Double-Ended Steering Cylinders

PSC double-ended steering cylinders will help drive your rig's performance. Their full-hydraulic offerings include several designs for different applications; some have housings machined with grooves for 4-mount clamps, and some kits include additional clamps. Choose the diameter and stroke size needed for your vehicle—then enjoy your day in the dirt with an assist from PSC double-ended steering cylinders.

5.0 out of 5 stars ( 3 )

$1,130.00

Scat Forged Standard Weight Crankshafts

Scat forged standard weight crankshafts are designed for street or race engines with substantially increased horsepower. These crankshafts are precision-ground, heat-treated, shot-peened, inspected, and micro-polished for superior tolerance control. Scat crankshafts are also nitride-hardened for superior wear resistance, have straight-shot and chamfered oil holes, and feature lightening holes in all rod throws. They also have a large radius on all journals for improved strength and wear resistance. Scat forged standard weight crankshafts are available in dozens of sizes and configurations for fitment on vehicles spanning seven decades.

4.46 out of 5 stars ( 26 )

$1,006.99

—

$1,431.99

283 Results Found For "rod"