Free Shipping on Orders Over $125 at Summit Racing

FAST LSXR Intake Manifolds

The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.

4.0 out of 5 stars ( 27 )

$1,210.95

—

$1,496.95

Edelbrock Performer RPM LS1 Intake Manifold Kits

Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.

4.1 out of 5 stars ( 10 )

$1,027.95

Holley EFI LS Hi-Ram Intake Manifolds

Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.

3.79 out of 5 stars ( 39 )

$1,177.95

—

$1,349.95

FAST LSX Intake Manifolds

These FAST LSX intake manifolds are the only 3-piece Gen III composite manifolds proven to deliver increased performance without compromising bottom-end drivability or high-rpm horsepower. They easily bolt onto GM Gen III (LS1, LS2, and LS6) engines and are designed to work with the 92mm FAST Big Mouth throttle body. The new stylish black intake manifolds deliver terrific performance right out of the box and can be ported by the customer for even more flow. As requested by previous LSX customers, the FAST LSX intake manifolds feature the added benefits of corrosion-free stainless steel assembly bolts, an improved throttle body sealing flange, and O-ring gasket and threaded insert throttle body mounts that provide increased durability.

4.14 out of 5 stars ( 7 )

$1,222.95

Edelbrock Street Tunnel Ram Intake Manifolds

Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.

4.64 out of 5 stars ( 14 )

$1,332.95

Holley EFI Hi-Ram Intake Manifolds

Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings

4.5 out of 5 stars ( 2 )

$1,024.95

—

$1,075.95

FAST LSXRT Intake Manifolds

FAST LSXRT intake manifolds are designed specifically for GM truck engines (4.8L, 5.3L, and 6.0L) and LS1, LS2, and LS6 race applications where hood clearance is not a concern. FAST LSXRT 102mm intake manifolds follow the path chartered by the original FAST LSX Gen III intakes by featuring a modular design that allows for easy porting and disassembly and a runner design that yields an incredible 25 peak horsepower gain over the stock intake (on a stock 6.0L engine with a Big Mouth 102mm throttle body). Similar to the LSXR 102mm intake manifold for cars, the LSXRT features the ability to remove individual runners for modification. LSXRT's are constructed from a proprietary precision injection molded polymer which offers many benefits, including lighter weight, greater strength and lower heat soak propensity. While they feature a 102mm air inlet that was designed for the FAST Big Mouth 102mm throttle body, they can also be used with stock 90mm or aftermarket 92mm throttle bodies (78mm three-bolt throttle bodies require an adapter). Other features include integrated nitrous bungs and precise bolt-on fit that permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues. Some GM truck models may require the FAST 92mm or 102mm throttle body.

4.0 out of 5 stars ( 10 )

$1,269.95

—

$1,467.95

Holley EFI LS Mid-Rise Intake Manifolds

Holley EFI LS Mid-Rise intake manifolds are designed for your high performance race engine. They're an excellent choice for street and performance street/strip applications. They're intended for big cube and high-rev applications without height limitations. The modular design of these manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Mid-Rise intake manifold bases from Holley.

2.14 out of 5 stars ( 7 )

$1,126.95

—

$1,177.95

Edelbrock Victor II EFI Chrysler HEMI Intake Manifolds

Edelbrock Victor II EFI Chrysler HEMI intake manifolds are designed for the later model Eagle or WT versions of Chrysler 5.7L, 6.1L, and 6.4L Gen III HEMI passenger car engines (with stock fuel injectors). They are similar in design to the early factory 6.1L SRT models but incorporate a wider plenum with long tapered runners, increasing airflow to the head, and relocated injector bosses to decrease port restriction. The front inlet accepts stock 80mm or Hellcat 92mm OEM throttle bodies and features the 5.7L/6.1L throttle body location/orientation. Edelbrock Victor II EFI Chrysler HEMI intake manifolds will clear most hoods without modifications and provide increased horsepower over stock units. Additional information: * Nitrous bosses added along the near-vertical runners * OEM or OE-style replacement air intake system must be used on 5.7L/6.1L engines. The 6.4L engines require OEM or OE-style 6.1L intake systems (without intake runner control valve) as stock and aftermarket 6.4L air intake systems will not fit * EDL-3647 fuel rail and hose kit are required for installation (sold separately) * Calibration required after installation * Not intended for use on Dodge/Ram trucks

4.86 out of 5 stars ( 7 )

$1,168.95

FAST LSXHR Intake Manifolds

The FAST LSXHR intake manifolds are available for LS3 rectangular port applications, as well as LS7 raised rectangular port applications. These units are the industry's first polymer tunnel ram-style intake manifolds—and are ideal for generating maximum power in boosted and naturally aspirated engines. Order the model designed for your application. Features include: * Standard "tall" stacks are interchangeable with separately purchased "medium" and "short" stacks to find the most powerful combination * Polymer construction is lightweight and high strength to eliminate power-robbing heat soak commonly found in aluminum intake manifolds * Average 30 hp gain between 5,000 and 7,500 rpm over competitors' high-ram intake manifolds * Rated for up to 45 psi of continuous pressure * Compound fuel injector angle aims spray pattern for ideal atomization, resulting in maximum power production and superior drivability * Reversible top allows for forward- or firewall-facing throttle body installations * Two nitrous nozzle bosses per runner for clean and easy direct port system installations * 103mm throttle body opening can be ported to 105mm

2.71 out of 5 stars ( 7 )

$1,222.95

—

$1,325.95

Trick Flow® Box-R-Series EFI Intake Manifolds for Ford 5.0L

Trick Flow® Box-R-Series EFI intake manifolds deliver an excellent balance of airflow distribution and velocity to provide big mid- and upper-RPM horsepower gains for ultra-high performance street and race engines running in the 3,000 to 8,000 rpm range. These units are available in kits with a natural finish aluminum lower manifold and an aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. The manifolds have a 90mm throttle body inlet and are designed for use on non-EGR engines. Additional features: * Large cross-section with 9.750 in. runners * Overall height to the upper manifold flange is 11.500 in. * Overall height to the lower manifold flange is 4.625 in. * 2.000 in. x 1.200 in. port size at head * 2.380 in. x 1.380 in. port size at mating flange The upper plenums and lower manifold are also available separately.

4.0 out of 5 stars ( 1 )

$1,224.98

Holley LS Modular Lo-Ram EFI Intake Systems

Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors

5.0 out of 5 stars ( 1 )

$1,075.95

—

$1,177.95

Performance Design Carbon pTR Intake Manifolds

Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)

Not Yet Reviewed

$1,399.99

Holley EFI Gen III Hemi Hi-Ram Intake Manifolds

Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles

4.0 out of 5 stars ( 2 )

$1,349.95

—

$1,449.95

Holley 351W Ford Hi-Ram EFI Intake Manifolds

Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.

3.2 out of 5 stars ( 5 )

$1,399.95

Holley EFI LT1 Gen V Hi-Ram Intake Manifolds

Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band

5.0 out of 5 stars ( 2 )

$1,075.95

—

$1,349.95

Edelbrock Victor Jr. LS1 Carbureted Intake Manifold Packages

These Edelbrock Victor Jr. LS1 carbureted intake manifold packages are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. They include an electronic timing control module that picks up MAP, crank position, and cam position in order to drive the stock coil-on-plug ignition system.

5.0 out of 5 stars ( 1 )

$1,077.95

On Sale

Holley SBF Hi-Ram EFI Intake Manifolds with Side-Mount Tops

Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold

Not Yet Reviewed

$1,299.95

Edelbrock Victor Tunnel Ram Intake Manifold Bases

Edelbrock Victor tunnel ram intake manifold bases are a modern updated design to their very successful Victor Ram 2-R Tunnel Ram intakes, which were first released over 35 years ago. They are designed for use with 468-582 C.I.D. standard-deck Chevrolet V8 engines with conventional rectangular port cylinder heads. This new and improved design has 7 in. long runners with close to 5.5 square-inches at the plenum, making them 25 percent larger than the current Victor Ram 2-R Tunnel Ram bases. These are the ideal intake manifolds for any modern high horsepower demanding application.

1.0 out of 5 stars ( 1 )

$1,060.95

Holley 5.0L EFI Intake Manifolds

Holley 5.0L EFI intake manifolds may be emissions-legal, but don't let that fool you into thinking they're restrictive--they flow tons of unrestricted air! They feature a 2,000 to 6,500 rpm power band, external EGR-passage maximized port and runner sizes, and they retain the stock injector and water outlet locations. The lower manifold ports match up to Holley cylinder heads, so you can be assured of getting the perfect match in the perfect power setup.

4.8 out of 5 stars ( 5 )

$1,177.95

—

$1,299.95

Edelbrock Super Victor II Intake Manifolds

Edelbrock Super Victor II intake manifolds are designed for use with large cubic inch big-block Chevy engines using the latest design conventional port heads. They're ideal for any 1,000+ horsepower drag race engine with high air flow requirements. Slip collar distributors are recommended for these manifolds when used on short deck blocks. All manifolds have extra-large carburetor outer flanges with a 5 x 5 in. opening to fit high flow carburetors and throttle stops. Modern casting techniques create smooth, thin, extended divider walls for "out of the box" performance, just port match and go!

5.0 out of 5 stars ( 8 )

$1,076.95

—

$1,078.95

On Sale

Holley EFI LT1 Gen V Lo-Ram Intake Manifolds

Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold

5.0 out of 5 stars ( 1 )

$1,024.95

—

$1,075.95

Pro-Filer Performance Products Sniper Tunnel Ram Intake Manifold Bases

Pro-Filer Sniper tunnel ram intake manifold bases are designed with the perfect runner to plenum volume to maximize the power and acceleration curves of your engine. They're built with cast injection bosses, 4500 Series carburetor flanges, four corner water bosses, and rectangular ports. They are available in a choice of deck heights. Pro-Filer Sniper Ram intake manifolds feature: * Aerospace specification aluminum alloy (primary virgin ingot) * 5,500 to 8,500 rpm range * Equal radius inlet with mirrored runner arrangement * Machinable plenum depth * Precision-cast runners * Tuned equal-length runners assure proper air flow * Will fit a majority of stock port cylinder heads--regardless of valve angle

Not Yet Reviewed

$1,146.99

Edelbrock Super Victor EFI Intake Manifolds

These Edelbrock Super Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.

4.9 out of 5 stars ( 10 )

$1,027.95

—

$1,068.95

198 Results Found For "manifold"