Availability
Since their release, Jesel Sportsman Series shaft rocker arms have proven themselves to be the ultimate replacements for inadequate stud rocker assemblies on OEM and aftermarket cylinder heads. The 2024 aluminum bodied rocker arms are designed to withstand open spring pressures of up to 900 lbs., while maintaining precise valve lash settings. They are designed to bolt on with little to no cylinder head modifications and in most cases still fit under a stock valve cover. The rocker geometry is preset and engineered using the common valve supplied with the specific cylinder head to provide a bolt-on-and-go installation. If you're still spending aggravating hours adjusting your stud rockers only to have to repeat the procedure the next weekend, Jesel Sportsman Series shaft rocker arms are your solution. Choose a set designed for your application.
( 23 )
$1,535.00
These COMP Cams LS1 Gen III aluminum shaft rockers are CNC-machined for accuracy and precision alignment. They feature pressurized internal oiling to ensure long life and reduced friction. These rockers require minor valve cover machining and deliver the adjustability needed by most performance modifications.
Not Yet Reviewed
$1,623.95
Crower Enduro centerline rollers are manufactured from heat-treated stainless steel and alloy steel tip rollers. Crower offsets the rocker stud hole in the trunnion, pulling the rocker tip back into correct alignment with the valve stem to ensure centerline contact. Re-establishing correct geometry reduces valve guide wear and promotes more accurate valve timing, plus it creates less friction for increased rpm potential. Crower's Enduro centerline roller rockers are available in various ratios, so you are good to go.
( 7 )
$1,023.99
—
$1,279.99
These Trick Flow GenX® 205 cathedral port cylinder heads are fully CNC-machined to significantly increase the performance GM's 4.8L/5.3L/5.7L LS engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 205 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$1,349.99
—
$1,399.99
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,149.99
—
$1,599.99
Trick Flow GenX® 220 cylinder heads for GM 6.0L LS2 engines are a great value in GM LS performance. The cathedral port heads incorporate features of Trick Flow's fully CNC-ported LS heads in a more affordable "Fast As Cast®" version that flows nearly as much air as Trick Flow's competition ported heads. The special Fast As Cast runner design duplicates the port shape and profile of fully CNC-ported runners, resulting in near-CNC-ported performance for the same price as regular cast cylinder heads. Other features include shallower 13.5° valve angles to decrease valve shrouding and increase mid-lift airflow, relocated spark plugs, CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), improved rocker arm/ valve cover clearance, and a rigid casting design. Trick Flow GenX 220 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 5.7L and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 4 )
$1,099.99
—
$1,149.99
Transform your LS1 into a powerhouse! Trick Flow® GenX® 220 cylinder heads for GM 5.7L LS1 engines are a great value in performance. The cathedral port heads incorporate features of Trick Flow® fully CNC-ported LS heads in a more affordable "Fast As Cast®" version that flows nearly as much air as their competition ported heads. The special Fast As Cast® runner design duplicates the port shape and profile of fully CNC-ported runners, resulting in near-CNC-ported performance for the same price as regular cast cylinder heads. Other features include shallower 13.5 degree valve angles to decrease valve shrouding and increase mid-lift airflow, relocated spark plugs, CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), improved rocker arm/valve cover clearance, and a rigid casting design. Trick Flow GenX 220 cylinder heads are emissions-legal under CARB E.O. D-747 for 1997-present GM vehicles with 5.7L and 6.0L engines. They are available fully assembled or as bare castings and sold individually.
Not Yet Reviewed
$1,099.99
—
$1,149.99
Trick Flow GenX® 225 cathedral port cylinder heads are fully CNC-machined to significantly increase the performance of 6.0L LS2 engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 225 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 3 )
$1,049.99
—
$1,449.99
Trick Flow GenX® 235 cathedral port cylinder heads are fully CNC-machined to significantly improve the performance of extreme street and race LSX engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 235 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 1 )
$1,049.99
—
$1,549.99
Trick Flow GenX® 215 cathedral port cylinder heads are fully CNC-machined to significantly increase the performance of 5.7L LS1 engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 215 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 3 )
$1,049.99
—
$1,449.99
Trick Flow GenX® 245 cathedral port cylinder heads are fully CNC-machined to significantly improve the performance of extreme street and race LSX engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 245 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$1,399.99
Building on the features that make the GenX® 255 for GM LS3 great—like 12° valve angles and relocated valves for reduced valve shrouding and improved piston-to-valve clearance—Trick Flow's GenX® 280 HIP cylinder heads withstand the abuse of high horsepower, power-adder performance demanded by today's racers and engine builders. The GenX® 280 heads list of features is long, and it starts with the HIP'd (Hot Isostatic Pressed) castings. This process significantly increases the casting's density for improved tensile and fatigue strength. It continues with industry leading airflow through CNC Competition Ported 280cc intake ports and Trick-Alloy™ powdered metal valve guides for added longevity. Manley Severe Duty intake valves and Extreme Duty Inconel exhaust valves are designed to withstand the abuse of extreme temperatures and stresses of big power adder applications. Trick Flow® by PAC Racing dual valve springs, titanium retainers, .750-inch thick deck, and 6-bolt-per-cylinder mounting pattern round out the features. Trick Flow® GenX® 280 HIP cylinder heads for GM LS3 work with all LS3 intake manifolds and LS9/LSA blower assemblies and fit all LS head gasket and engine block combinations. These cylinder heads are available fully assembled or as bare castings. Sold individually. Key features: * 280cc intake ports and 67cc combustion chambers * HIP'd casting * Accepts 3/8 in. pushrods * Powdered metal valve guides * 2.165 in. NK-844 severe duty stainless steel intake valves * 1.600 in. XH-432 extreme duty Inconel exhaust valves * .750 in. thick deck * 6-bolt configuration * Assembled heads include a Trick Flow® LS3 rocker stand
Not Yet Reviewed
$1,349.99
Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.
( 7 )
$1,149.99
—
$1,599.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
