Free Shipping on Orders Over $125 at Summit Racing

Holley Terminator X MAX Engine Control Modules

Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

4.29 out of 5 stars ( 7 )

$1,229.95

Jenny Explosion-Proof Ventilation Fans

Rugged, dependable Jenny explosion-proof ventilation fans are available in either direct-driven 16 and 20 in. models, or belt-driven 24 in. models. All fans feature totally enclosed explosion-proof motors and are designed for years of worry-free operation. These units conform to all OSHA specifications. Each fan is equipped with a spark-resistant polypropylene blade. Features include: * Fully assembled and ready to operate * Each fan has its own properly matched, formed venturi for highest performance * Spark-resistant polypropylene blade has a rugged cast aluminum hub * Sturdy, all-welded steel frame construction * Corrosion-resistant powdercoat finish * Rugged safety backguard standard on direct drive models only * Variable-speed models with solid-state variable-speed control * All models have totally enclosed fan-cooled explosion-proof motors with built-in automatic reset overload protection (motors are UL listed for Class 1, Group D and Class II, Groups E, F, and G atmospheres)

4.0 out of 5 stars ( 4 )

$1,008.99

Dorman Electric Fans

These Dorman fans will help to keep your ride cool. If you are in need of a replacement fan, Dorman fans have you covered.

4.46 out of 5 stars ( 167 )

$1,073.99

Flex-A-Lite Direct-Fit Electric Fans

Flex-A-Lite direct-fit fans delivers all of the advantages of an electric cooling fan—quicker warm-ups and cool-downs, additional horsepower and torque, quieter operation, and a custom installation. All necessary mounting hardware is included, making them that much easier to install. Flex-A-Lite direct fit electric fans are available in a variety of sizes, quantities, and cfm abilities. Choose the model that best complements your engine compartment.

4.66 out of 5 stars ( 29 )

$1,136.99

Be Cool Dual Electric Fan Wiring Kits

Be Cool dual electric fan wiring kits are designed to wire a dual fan to your vehicle. They include a 50 amp waterproof-style relay, a fusible link, a wiring harness, wire connectors, and a detailed instruction sheet. If you need to control the fan manually, the required switch is sold separately.

4.33 out of 5 stars ( 9 )

$1,399.99

On Sale

Holley Terminator X Engine Management Systems

Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)

4.48 out of 5 stars ( 96 )

$1,399.95

—

$1,549.95

$1,258.95

—

$1,393.95

Clearance

Axial SCX6 Jeep JLU Wrangler 1:6 Scale RC Trucks

Axial SCX6 Jeep JLU Wrangler 1:6 scale RC trucks bring a whole new dimension to RC crawling—and Axial engineers have done it right. Whether you're a fan of full-size Jeeps, rock crawling, large-scale models, or all of the above, you'll be thrilled by the amount of realistic detail and high performance functionality found here. These 4WD vehicles take Axial "scaling" to the next level. Based on the proven SCX10 III, the SCX6 chassis might be considered its big brother. It's engineered for extreme durability and performance with AR90 axles. For optimal handling, the chassis has a 3-link panhard front and 4-link rear suspension setup. The transmission offers high and low gears out of the box, with a Spektrum S614 Metal-Gear Servo included and installed for the 2-speed linkage. When the sun goes down, functioning LED headlights and taillights add even more realism. Massive, 7 in. tall BFGoodrich KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road surfaces. They're mounted on licensed Black Rhino "Primm" injection-molded, 3-piece beadlock wheels so that the tires can be removed and replaced easily without gluing. With the included Spektrum DX3 radio, you'll enjoy the superior range, response, and interference resistance of exclusive DSMR technology. Together with the installed Firma Crawler 120A Smart Sensored-Brushless ESC, it also comes ready to deliver the telemetry advantages of exclusive Spektrum Smart technology. Install a Spektrum Smart LiPo battery and you can view vehicle battery capacity on the transmitter's voltage level indicator. Outfit the DX3 with the optional BT2000 Bluetooth module, download the free Spektrum Dashboard app to your smart device, and you're ready to use more Smart real-time telemetry—without needing on-board sensors or modules. With its 1/6 scale size, popular Jeep styling, and unstoppable Axial engineering, the SCX6 Jeep JLU Wrangler 4WD takes RC scaling to an exciting new level. Just add your choice of suitable battery and take on the rocks! Order the color you prefer.

Not Yet Reviewed

$1,199.99

$1,099.50

Oracle Oculus ColorSHIFT Bi-LED Projector Headlights

Oracle Oculus ColorSHIFT Bi-LED Projector Headlights are now available in a ColorSHIFT RGB+W color-changing version! These headlights feature advanced LED projection with 4,800 lumens of high-quality illumination for enhanced driver visibility in all weather conditions. The LED light source has lower power demands compared to the factory lamps while providing more light output. Select the model with controlling options you prefer. ColorSHIFT Oculus Headlights include 3-tiered RGB features in the lamps: - Outer Halo Ring (RGB+W) - Inner Halo Ring (RGB) - Projector Demon Eye (RGB) Each LED feature has a separate cable output and can be connected together so all three create the same color or are set up as three separate channels or "zones," depending on the user preference and the ColorSHIFT controller selected. (Please note that these features are intended for off-road "show" use only and are not compliant for street use.) The Pure-White DRL has its own wiring harness (same as the original Oculus) that connects to the fuse box with an add-a-circuit for easy and safe integration. The DRL will come on when the engine is running or can be connected to a switch (including the factory Aux switches) for additional user control. Specifications: * Wattage: 36 watts each * Total raw lumens: 4,800 LM * Color temp: 5500K * Certification: DOT SAE HL VOR 1 * Warranty period: 2 years * Multi-national patented design Package contents: * ORACLE Lighting Oculus 7 in. ColorSHIFT Bi-LED Projector Headlights * DRL wiring harness * Add-A-Circuit fuse adapter * 6x RGB wiring extensions * (RGB Controller included if selected from options) * Features: Precision LED lighting projector for optimum light distribution and beam angle. Installs using original mounting hardware; headlight wiring is plug-and-play into the factory connector without additional relays or harnesses. Halo DRL features over 200 bright white LEDs for a vivid lighting impact. * Benefits: These all-new headlamps provide enhanced driver visibility with increased and focused LED light output. Complete headlight replacement, better light focus than a simple bulb upgrade. Uses original factory beam angle adjustability for proper light focus on lifted Jeeps. * Safety: Light focus is very important for not only driver safety but others on the road who can potentially have their vision obstructed by glare. This is especially significant on lifted vehicles where the light source is raised and in a position to interfere with the field of vision of other drivers. These new Oculus headlights feature a very sharp cut-off line and focus light with precision specifically to avoid such issues. * Reliability: It is undeniably important to implement proper thermal management tools for high-performance LEDs to operate with reliability in various environments. Oculus utilizes both active and passive cooling methods to sustain low LED temperatures. Remote mounted heat sinks and an internal cooling fan work in conjunction to ensure proper temperature control and longevity of the LEDs.

Not Yet Reviewed

$1,008.99

—

$1,123.00

Be Cool Factory Fit Modules

Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.

4.08 out of 5 stars ( 92 )

$1,399.99

—

$1,499.99

On Sale

MSD 7AL-3 Ignition Boxes

MSD 7AL-3 ignition boxes have been a favorite of sportsmen and racers that want adjustments at their fingertips. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus there's an RPM Activated Switch for precise control over a circuit. These ignitions combine high-output spark energy for high-compression race engines, combined with the most popular drag racing accessories, including a 3-step rev limiter, 4-stage retards, a start retard, and an rpm-activated switch. MSD is re-launching the 7AL-3s with upgraded features, a new look, and updated internal components, including surface mount circuitry. The new 7AL-3s are easy to spot with a black anodized housing and a new adjustable start retard circuit. Racers will also be happy to learn that the ignition can now be used on 4, 6, or 8-cylinder engines! Additional features include: * Fits the same mounting footprint as the original 7AL-3 * Start retard is adjustable with plug-in retard modules * Retard stages require positive 12 V to activate * Surface mount assembly reduces internal components

4.83 out of 5 stars ( 30 )

$1,126.95

$1,013.95

Be Cool Show & Go Modules

It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays

4.75 out of 5 stars ( 8 )

$1,399.99

—

$1,499.99

Summit Bucks

Griffin Performance Fit Radiator Combos

Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.

4.01 out of 5 stars ( 240 )

$1,221.00

—

$1,423.00

Vintage Air Gen-V SureFit Systems Evaporator Kits

Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower

4.25 out of 5 stars ( 20 )

$1,418.99

Holley EFI Terminator X GM GDI Controllers

Why settle for a factory ECU with a cumbersome tuning interface when you can have complete control of your engine, self-learning fuel strategies, and the proven, race-winning technology of Holley EFI at a budget-friendly price? With Holley's Terminator X GM GDI controllers, you can take control of your GM Gen V LT4, LT1, L83, or L86 engine. They feature real-time fuel learn, an integrated 1bar MAP sensor, and four programmable inputs and outputs that are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Whether you're building an LT-swapped budget beater or a boosted racecar, Holley EFI Terminator X GM GDI controllers have the features and technology you need at a price that won't break the bank. Features and notes: * Terminator X comes fully loaded with base maps for common LT engine combinations * 3.5 in. touch screen LCD handheld: -- Easy-to-use calibration wizard -- Tuning and gauge display functions * External gasoline direct injection controller, enables control and tune of factory injectors, GM Gen V LT Variable Valve Timing (VVT), and factory fuel pumps * Holley EFI industry-leading, easy-to-use software suite that allows full laptop access for advanced users * Plug-and-play GM Gen V LT engine GDI and VVT controller--ONLY compatible with Terminator X or X MAX ECUs. Note: To identify if your engine is an early or late application, refer to your fuel pressure sensor, located behind the intake manifold. Early sensors have a 4-pin connector, whereas late sensors have a 3-pin connector. This will help you pick which kit you require for your engine.

Not Yet Reviewed

$1,024.95

FiTech Go EFI 4 600 HP Self-Tuning Fuel Injection Systems

When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup. These trick systems fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it—and the ability to change air/fuel ratios and ignition timing on the fly. Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind. Order the model with options best-suited for your application. Additional features: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Adjustable fan control switch * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet Flow swirl spray annual discharge obtains complete atomization * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle

4.16 out of 5 stars ( 257 )

$1,195.99

—

$1,458.99

Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits

Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.

Not Yet Reviewed

$1,364.95

—

$1,377.95

FiTech Go EFI 4 Power Adder 600 HP Self-Tuning Fuel Injection Systems

If you're running a supercharger, blower, or nitrous, and want to ditch the carburetor, you'll need a FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection system. These units mount the self-adjusting ECU on the throttle body, fit any 4-barrel intake manifold, and are designed to support 250 to 600 hp engines. Each system has a hand-held controller with a touch screen for initial setup, a throttle linkage that suits most transmissions, and is manufactured with OE engineering. Models are available with or without a fuel pump. Increased performance is at hand with FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems. Additional Go EFI 4 Power Adder features: * Throttle body is boost-ready * Can change air/fuel ratios and ignition timing on-the-fly * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet flow swirl spray annual discharge obtains complete atomization * Built-in pressure regulator * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Complete tuning from Pro Laptop software * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle

3.93 out of 5 stars ( 56 )

$1,277.00

—

$1,494.99

CSF Fluid Coolers

CSF fluid coolers are part of a broad range that includes several designed, developed, and track proven in collaboration with BMW tuning specialists and parts manufacturers. Available coolers include: * Dual-pass, race-spec, DCT transmission coolers--a number are plug-and-play and include oil-line connections, mounting brackets, shrouds, and ducting * All-aluminum, controlled atmosphere brazed (CAB) dual-pass, plug-and-play, power steering coolers * Dual-pass, all-aluminum, race-spec engine oil coolers with cast end-tanks * Advanced and unique, dual-fluid, heavy-duty oil coolers with built-in fittings and included SPAL fan and sealed shroud. Additional features and benefits of CSF fluid coolers include: * Drop-in fit coolers require no modifications to install; They fit OE bumpers and accept factory oil-line connections, mounting brackets, shrouds, and ducts … even aftermarket splitters * Many feature dual-pass, high-performance cores that replace OEM single-pass designs for maximum surface area and flow * OE low-efficiency, mechanically bonded cores replaced with CAB-brazed, high-efficiency, turbulated, heavy-duty, bar and plate design cores for the most reliable and durable coolers available (on specific applications) * High-density, multi-louvered fin design with more surface area than OE units * Where applicable, fully TIG-welded end-tanks vs. OE mechanically jointed and tack-welded tanks for superior reliability and durability * Select applications include CSF's A/C condenser technology using super-high pressure, multi-channel micro-tubes * Lab tested to be more efficient than OEM coolers

5.0 out of 5 stars ( 2 )

$1,095.00

Edelbrock Pro-Flo 4 EFI Standalone ECU and Harness Kits

Edelbrock Pro-Flo 4 EFI standalone ECU and harness kits provide an economical, EFI solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. These kits can be used with any application for which Edelbrock offers a Pro-Flo 4 distributor. Each standalone kit includes ECU, supporting sensors, a wideband O2 sensor, and wiring harness. The ECU controls both fuel and spark, and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones, and the software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must purchase a Pro-Flo distributor (specific to the application) and provide an induction system, including EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, fuel pump, regulator, and fuel lines.

Not Yet Reviewed

$1,126.95

ARB On-Board High Performance Twin Air Compressors

Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia

5.0 out of 5 stars ( 5 )

$1,057.75

—

$1,059.95

FiTech Mean Street EFI 800 HP Self-Tuning Fuel Injection Systems

You don't need a carburetor—you need a FiTech Mean Street EFI 800 hp system! These full-featured, self-tuning fuel injection setups deliver a whole lot in a small package. Mean Street offers an onboard ECU and fuel pressure regulator to bring you simple, clean wiring and an easy install. FiTech's wideband oxygen and annular swirl wet-flow technology, proprietary self-tuning technology, and hand-held controller with touch screen gets your car on the road or track faster and with more power than ever. Would you rather have a perfectly tuned carburetor or an EFI system that tunes itself perfectly? The choice is easy--FiTech Mean Street EFI 800 hp systems. FiTech Mean Street features include: * Blacked out diecast throttle body * Hand-held controller with 8GB data log capabilities * Annular discharge * Windshield mount for control * 8 high-flow 800 hp injectors * Built-in fuel pressure regulator * Internal MAP sensor * Throttle position sensor * Idle air control sensor * Coolant temp sensor * Wideband oxygen sensor * Oxygen bung kit * -06 AN fuel inlet fittings * One fan control adjustable from controller * AC kick-up control kit * Designed for applications making at least 6 in. of vacuum at idle

3.7 out of 5 stars ( 46 )

$1,171.00

—

$1,322.99

Altronics Powerlite Pro Series Lithium Batteries

Altronics Powerlite Pro Series lithium performance racing batteries feature an advanced Battery Management System that completely controls all battery functions. Altronics uses a LiFePo4 (lithium iron phosphate-type) lithium cell in their batteries, which are very safe. Powerlite Pro Series features and benefits: * Pro Series BMS protects from under/over charge, short circuit, over temperature, low voltage cutoff, and fully balance maintains battery * Pro Series batteries allow for charger to be connected during storage periods to automatically fully maintain battery * Pro Series includes a 4-year warranty * Up to 7 times lighter than other batteries * Life expectancy of up to 10 years (2000 charge cycles—assumes typical 70 percent DOD and proper maintenance) * Charges up to 10 times faster * Much more stable voltage and current output * 16 V models provide faster cranking, runs pumps and fans more efficiently, always provides ignition with proper voltage for peak spark * A "green" product; enviromentally safe * RoHs and UN DOT safety-approved

1.0 out of 5 stars ( 1 )

$1,449.99

—

$1,499.99

FiTech Easy Street 600 HP EFI Systems with Go-Spark CDI

FiTech Easy Street 600 HP self-tuning fuel injection systems deliver high performance—and style! Their gold finish is the perfect way to spice up that monster motor, giving it an old-school look. And, like all FiTech EFI systems, the Easy Street 600 HP is a self-learning, plug-and-play system that features an ECU mounted directly to the throttle body for simplified wiring and an easy installation. Plus, these systems include FiTech's Go-Spark CD ignition that upgrades spark performance for improved combustion and power output. Features of the Easy Street EFI: * Annular discharge * Windshield mount for control * Four 80 lb. flow matched injectors * Extreme self-learning for a wide range of super-fast dial in connections * Suitable for crate engines and performance engines * Pre-programmed with bolt-n-go technology for out-of-the-box performance with minimal input required * Easy Tach input, reads Tach signal from COIL, HEI, CDI, and many other ignition brands (no timing control) * For non-boosted engines; natural aspirated applications only * Wide band oxygen/ sensor with mounting kit * On-board fuel pump driver with PWM * Hand-held module for performance tuning * One fan control * Compatible with E-85 gasoline

Not Yet Reviewed

$1,090.99

John Dow EuroVent Portable Vehicle Exhaust Extraction Systems

Clear out exhaust fumes from garage service areas with John Dow EuroVent vehicle exhaust extraction systems. Practical and affordable, these portable extractors capture fumes from the vehicle and discharge them safely up to 30 ft. away. Plus, caster wheels allow the units to be moved anywhere needed. Features and benefits include: * 3/4 hp fan produces 330 cfm airflow * Fan is mounted in tough, roto-molded polyethylene "flow-through" case * Mobile base makes the system easy to position behind the vehicle * Height position is controlled by a quick-release, spring-loaded cam * The discharge hose stores neatly when not in use * Optional "Y" hose adapter available for dual-exhaust vehicles (sold separately) * 110 V * 86 lbs. overall weight

Not Yet Reviewed

$1,349.99

31 Results Found For "fan+controller"