Availability
Showing In Stock Items. Show All 475 Items.
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$1,210.95
—
$1,496.95
On Sale
Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.
( 39 )
$1,149.95
—
$1,299.95
$1,033.95
—
$1,168.95
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
FAST LSXRT intake manifolds are designed specifically for GM truck engines (4.8L, 5.3L, and 6.0L) and LS1, LS2, and LS6 race applications where hood clearance is not a concern. FAST LSXRT 102mm intake manifolds follow the path chartered by the original FAST LSX Gen III intakes by featuring a modular design that allows for easy porting and disassembly and a runner design that yields an incredible 25 peak horsepower gain over the stock intake (on a stock 6.0L engine with a Big Mouth 102mm throttle body). Similar to the LSXR 102mm intake manifold for cars, the LSXRT features the ability to remove individual runners for modification. LSXRT's are constructed from a proprietary precision injection molded polymer which offers many benefits, including lighter weight, greater strength and lower heat soak propensity. While they feature a 102mm air inlet that was designed for the FAST Big Mouth 102mm throttle body, they can also be used with stock 90mm or aftermarket 92mm throttle bodies (78mm three-bolt throttle bodies require an adapter). Other features include integrated nitrous bungs and precise bolt-on fit that permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues. Some GM truck models may require the FAST 92mm or 102mm throttle body.
( 10 )
$1,269.95
—
$1,467.95
On Sale
When you're serious about power for your LS or new LT1 engine, call in the AirForce! MSD Atomic AirForce intake manifolds have been designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient paths for improved airflow and distribution to stock and modified engines. Their unique bell-mouthed runner entrances maximize airflow and minimize shrouding--efficiently using the available plenum volume for an unobstructed flow path over opposing runners. The 2-piece molded polymer design resists heat soak, minimizes weight, and allows easy access to the runners for porting. MSD Atomic AirForce intake manifolds accept an OEM or 103mm throttle body, as well as stock, aftermarket, or Atomic LS EFI fuel rails. They are supplied with new gaskets and hardware for a direct bolt-on package. The 103mm throttle bore allows the use of large throttle bodies for greater airflow, and a direct-flow path runner design promotes maximum airflow.
( 19 )
$1,349.95
—
$1,649.95
$1,213.95
—
$1,483.95
On Sale
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$1,049.95
These FAST LSX intake manifolds are the only 3-piece Gen III composite manifolds proven to deliver increased performance without compromising bottom-end drivability or high-rpm horsepower. They easily bolt onto GM Gen III (LS1, LS2, and LS6) engines and are designed to work with the 92mm FAST Big Mouth throttle body. The new stylish black intake manifolds deliver terrific performance right out of the box and can be ported by the customer for even more flow. As requested by previous LSX customers, the FAST LSX intake manifolds feature the added benefits of corrosion-free stainless steel assembly bolts, an improved throttle body sealing flange, and O-ring gasket and threaded insert throttle body mounts that provide increased durability.
( 5 )
$1,222.95
On Sale
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$1,017.95
On Sale
Holley EFI LS Mid-Rise intake manifolds are designed for your high performance race engine. They're an excellent choice for street and performance street/strip applications. They're intended for big cube and high-rev applications without height limitations. The modular design of these manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Mid-Rise intake manifold bases from Holley.
( 7 )
$1,149.95
$1,033.95
Edelbrock Victor II EFI Chrysler HEMI intake manifolds are designed for the later model Eagle or WT versions of Chrysler 5.7L, 6.1L, and 6.4L Gen III HEMI passenger car engines (with stock fuel injectors). They are similar in design to the early factory 6.1L SRT models but incorporate a wider plenum with long tapered runners, increasing airflow to the head, and relocated injector bosses to decrease port restriction. The front inlet accepts stock 80mm or Hellcat 92mm OEM throttle bodies and features the 5.7L/6.1L throttle body location/orientation. Edelbrock Victor II EFI Chrysler HEMI intake manifolds will clear most hoods without modifications and provide increased horsepower over stock units. Additional information: * Nitrous bosses added along the near-vertical runners * OEM or OE-style replacement air intake system must be used on 5.7L/6.1L engines. The 6.4L engines require OEM or OE-style 6.1L intake systems (without intake runner control valve) as stock and aftermarket 6.4L air intake systems will not fit * EDL-3647 fuel rail and hose kit are required for installation (sold separately) * Calibration required after installation * Not intended for use on Dodge/Ram trucks
( 7 )
$1,168.95
Designed for 1988-96 Ford trucks (under 8,600 GVW) with fuel-injected 5.8L V8 engines, the modular design of these Edelbrock manifolds incorporates the latest airflow technology for maximum torque gains in the mid range. Other features include a broad power range from idle to 5,500 rpm and a removable plenum cover that allows access to runners. The base manifold is CNC port-matched to the upper manifold for maximum power, and they accept all stock hardware. The upper is powdercoated light titanium gray, and the base is as-cast.
( 11 )
$1,132.95
Prepare your pony for the street and strip! The Edelbrock Performer 5.0 RPM II manifolds are designed for 1986-95 5.0L Mustangs and have shown significant gains in horsepower over existing designs in the 1,500 to 6,500 rpm range. That makes these intakes ideally suited for street and strip applications. The manifolds consist of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. The upper manifold is powdercoated light titanium gray.
( 5 )
$1,081.95
On Sale
Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band
( 2 )
$1,149.95
—
$1,299.95
$1,033.95
—
$1,168.95
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$1,332.95
Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)
Not Yet Reviewed
$1,399.99
Holley 5.0L EFI intake manifolds may be emissions-legal, but don't let that fool you into thinking they're restrictive--they flow tons of unrestricted air! They feature a 2,000 to 6,500 rpm power band, external EGR-passage maximized port and runner sizes, and they retain the stock injector and water outlet locations. The lower manifold ports match up to Holley cylinder heads, so you can be assured of getting the perfect match in the perfect power setup.
( 5 )
$1,149.95
—
$1,249.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$1,123.95
Brodix cylinder heads single plane intake manifolds can deliver the power you need on the street, at the track, or on the strip. They're a single 4-barrel design that features a tall open plenum for increased flow, plus extended runners for improved flow velocity. This helps to boost power and makes the manifolds perfect for drag and oval track racing. If you're looking for even more power, models are available with bosses designed for nitrous hookup. Order the unit tailored for your application.
( 3 )
$1,047.99
On Sale
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$1,299.95
—
$1,499.95
$1,168.95
—
$1,348.95
LS Classic Series classic intake manifold kits are designed to pay respect to the classic muscle cars and trucks of the 1950's, 60's, and 70's while using modern technology for ultimate performance. The intake kits include a single-plane aluminum intake manifold, black anodized billet aluminum fuel rails, a vintage air cleaner assembly, 4150 carb adapter plate, all mounting hardware, and gaskets. These systems require a 92mm GM 4-bolt throttle body and LS3/EV6 or LS1/EV1 fuel injectors. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series classic intake manifolds are available to work with rectangular or cathedral port LS cylinder heads. Order the classic intake manifold kit suited to fit your application.
( 1 )
$1,521.95
On Sale
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$1,045.95
The FAST LSXHR intake manifolds are available for LS3 rectangular port applications, as well as LS7 raised rectangular port applications. These units are the industry's first polymer tunnel ram-style intake manifolds—and are ideal for generating maximum power in boosted and naturally aspirated engines. Order the model designed for your application. Features include: * Standard "tall" stacks are interchangeable with separately purchased "medium" and "short" stacks to find the most powerful combination * Polymer construction is lightweight and high strength to eliminate power-robbing heat soak commonly found in aluminum intake manifolds * Average 30 hp gain between 5,000 and 7,500 rpm over competitors' high-ram intake manifolds * Rated for up to 45 psi of continuous pressure * Compound fuel injector angle aims spray pattern for ideal atomization, resulting in maximum power production and superior drivability * Reversible top allows for forward- or firewall-facing throttle body installations * Two nitrous nozzle bosses per runner for clean and easy direct port system installations * 103mm throttle body opening can be ported to 105mm
( 7 )
$1,222.95
—
$1,325.95
On Sale
APR carbon fiber intake systems let your engine breathe! The stunning carbon fiber design rejects power-robbing heat from your engine bay and efficiently delivers an unrestrictive path for cold, dense air fed from outside the engine bay. These systems use high-flow filters, providing excellent filtration without restrictions—prudently keeping the engine clean and optimizing power delivery. They dramatically outflow your stock intake, sharpening throttle response and lessening strain on the turbocharger. APR carbon fiber intake systems typically install in minutes, look fantastic, instantly deliver a sporty engine note, and are recommended for all stages of performance.
Not Yet Reviewed
$1,699.95
$1,049.95
—
$1,528.95
Pack some more power into your Coyote-powered Mustang with Ford Performance Parts 5.0L 4V Cobra Jet intake manifolds. These manifolds were original equipment on 2013 Mustang Cobra Jet factory race cars and are proven to give you power increases without sacrificing torque. They are constructed from lightweight composite material that is extremely durable, even under racing conditions, but is still compatible with production fuel rails. To beef up the power band, the engineers at Ford Performance Parts utilized the larger GT500/Cobra Jet throttle body and optimized the runners to make peak power at 7,750 rpm, making your car a beast at the track. Don't mess around with unproven parts when you can get track-proven results with Ford Performance Parts 5.0L 4V Cobra Jet intake manifolds. Additional features include: * Significant power increase above the M-9424-M50BR Ford Performance Parts Boss 302 intake manifold with no loss of torque * Total intake volume 635 cubic inches * Designed and tested to 20+ psi * O-ring intake gaskets included * Requires throttle body M-9926-MSVT, M-9926-CJ65, or M-9926-SCJ * Requires Cobra Jet 5.0L Cold Air Kit M-9603-M50CJ to mate to oval throttle body * Mustang GT requires installation kit M-9444-M50B or equivalent (inlet hose in kit not used) * Not compatible with strut tower brace * CJ inlet tube does not have provisions for aspirator tube hook up common to automatic-equipped 2011-14 Mustang GT * Calibration is necessary to prevent engine damage! * Calibration not included!
Not Yet Reviewed
$1,381.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
