Free Shipping on Orders Over $109 at Summit Racing

MSD Pro-Billet Front Drive Distributors

MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.

Not Yet Reviewed

$1,126.95

—

$1,177.95

Jesel Extreme Series Distributor Drive Kits with ICT

Jesel Extreme Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and the ability to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Extreme Series distributor drives also feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications.

5.0 out of 5 stars ( 1 )

$1,140.00

Jesel Pro Series Distributor Drive Kits with ICT

Jesel Pro Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and are ideal for naturally aspirated engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Pro Series distributor drives also feature Gates PowerGrip HTD belts and use Moroso Ultra Series distributor components. The balanced brass rotor tip and form-staked carbon ball on the coil lug have been designed to eliminate grounding paths and crossfiring.

Not Yet Reviewed

$1,090.00

MSD Pro-Billet Hall-Effect Cam Sync Distributors

If you're assembling an aftermarket EFI system, then these MSD Pro-Billet hall effect cam sync distributors are for you! They offer a magnetic pickup to trigger the ignition, and they now have a new hall-effect pickup to set up the cam synchronization for most EFI systems. The MSD Pro-Billet hall-effect cam sync distributors also feature a special built-in LED that illuminates when the sync signal is detected, making setup simple. In addition, the distributors include an adjustable slip collar for compensation in engines with modified deck heights or custom intake manifolds. The MSD Pro-Billet hall effect cam sync distributors' small diameter cap keeps the distributors low in the engine for extra clearance, and a ball bearing guides the QPQ-coated shaft for stable operation through high rpm.

3.0 out of 5 stars ( 2 )

$1,126.95

MSD Chevy Crate Engine Ignition Kits

These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!

4.78 out of 5 stars ( 18 )

$1,024.95

Holley EFI Hi-Ram Intake Manifolds

Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings

4.5 out of 5 stars ( 2 )

$1,024.95

—

$1,075.95

FiTech Easy Street 600 HP EFI System Fuel Injection Master Kits

FiTech Easy Street 600 hp EFI system fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel universal in-tank pump modules—255 lph or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

4.0 out of 5 stars ( 7 )

$1,111.99

—

$1,171.99

FiTech Go EFI 4 600 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 4 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Go EFI 4 TBIs with their Go-Spark CDI ignition and either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The Go EFI 4 system is ideal for everyday drivers to weekend cruisers or even bracket cars making up to 600 hp, and easily fits any 4-barrel intake manifold. Thanks to the built-in ECU, MAP sensor, and fuel pressure regulator, wiring is kept to just a few connections for an easy install. The quick self-learning technology that FiTech is known for, combined with their wet annular discharge design, will have your engine fired up and idling smoothly in minutes. A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info is supplied. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,442.99

—

$1,452.99

FiTech Easy Street 600 HP EFI System/Go-Spark Fuel Injection Master Kits

FiTech Easy Street 600 hp EFI system/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel universal in-tank pump modules—340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,372.99

—

$1,382.99

FiTech Go EFI 2-Barrel 400 HP Systems with Go-Spark CDI Ignition

There are a lot of enthusiasts looking to update their 2-barrel fed cruisers with the drivability benefits of electronic fuel injection. FiTech Go EFI 2-barrel 400 hp systems with Go-Spark CDI ignition deliver just that, along with an upgrade to high-powered sparks for improved combustion and power output. Go EFI 2-barrel TBIs have the ECU incorporated, producing a simple installation with only a few wires to connect (fuel pump, ignition, power, and tach). Each throttle body is supplied with handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Go-Spark produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Not Yet Reviewed

$1,079.99

FiTech Go EFI 2-Barrel 400 HP System/Go-Spark Fuel Injection Master Kits

FiTech Go EFI 2-barrel 400 hp system/Go-Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. FiTech mates their 2-barrel TBI with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. And going a step further, the Go-Spark CDI ignition will elevate the spark for even more improved performance. Go EFI 2-barrel TBIs have the ECU incorporated, producing a simple installation with only a few wires to connect (fuel pump, ignition, power, and tach). Each throttle body is supplied with handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Go-Spark produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. Fuel cell pump modules are offered in two models—single or dual pump. Each style features a billet machined top assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$1,361.99

—

$1,372.99

11 Results Found For "HEI distributor"