Availability
Showing In Stock Items. Show All 13 Items.
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,583.95
—
$1,645.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,022.50
—
$1,405.50
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,087.50
—
$1,625.50
Edelbrock Performer RPM Pontiac CNC cylinder heads have the same specifications as our popular Performer RPM cylinder heads for 1962-79 455 c.i.d. Pontiac engines, but feature a CNC-machined combustion chamber. The CNC-machined chambers result in a consistent and precise chamber for improved flow performance. Performer RPM CNC cylinder heads are available in two chamber sizes. The 87cc chamber version is ideal for 9.5:1 engines and will deliver excellent street performance on low-octane fuel. Performer RPM CNC cylinder heads with 72cc chambers are best for higher compression engines. Both are patterned after the same port flange configuration as the 1969-70 Ram-Air IV Pontiac cylinder heads.
( 2 )
$1,521.50
—
$1,560.50
BDS Suspension steps up the performance and capability of your truck or Jeep with their NX2 Nitro shock lift kits. Designed to improve stance, each kit includes the necessary components to set your vehicle up right with clearance for larger tires at an affordable price. Featuring a set of NX2 Nitro Series shocks, BDS lift kits will also include either ProRide coil springs for improved ride quality and more articulation, Glideride leaf springs to provide full lift height and increased capacity, or steel blocks and add-a-leaf for a level stance from front to rear. They may also include other upgrades that add strength and improved handling. Select the BDS NX2 Nitro shock lift kit engineered for your vehicle. NX2 Nitro Series shocks: * Nitrogen-charged * Twin-tube design * 10-stage velocity-sensitive valving * Dual-welded ends for increased strength * 1 3/8 in. high-flow piston * Self-lubricating seals * Silver powdercoat finish
( 1 )
$1,042.45
—
$1,676.30
BDS Suspension steps up the performance and capability of your truck or Jeep with their Fox 2.0 lift kits. Designed to improve stance, each kit includes the necessary components to set your vehicle up right with clearance for larger tires at an affordable price. Featuring a set of Fox 2.0 IFP (internal floating piston) gas shocks, BDS lift kits may also include either ProRide coil springs for improved ride quality and more articulation, Glideride leaf springs to provide full lift height and increased capacity, or steel blocks and add-a-leaf for a level stance from front to rear. Some kits may contain other upgrades along with the Fox 2.0 shocks/struts for improved strength and handling. Select the BDS lift kit engineered for your vehicle. Fox 2.0 Performance Series shocks: * 2 in. impact extruded aluminum body * Internal floating piston (IFP) monotube design * CNC-machined 6061 T-6 aluminum mounting ends * Massive 5/8 in. hard chrome plated heat-treated alloy steel shaft * Race-developed high-flow piston design * Application-specific valving to maximize performance * Long-lasting clear anodized finish
Not Yet Reviewed
$1,005.75
—
$1,642.45
Step up to race-level performance with OEM compatibility using these Edelbrock E-Series E-210 aluminum cylinder heads. They feature larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts--perfect for spec series racers and large-displacement engines. Available bare or assembled, E-210 cylinder heads allow you to use off-the-shelf headers and hardware. Forget those overseas castings; go with quality, economy, and performance. Go with Edelbrock E-Series E-210 cylinder heads.
( 13 )
$1,654.95
When you need more control, JKS J-Kontrol lift kits should be your choice. They include geometry correcting brackets to enhance your on-road driving experience, while keeping your Jeep ready for rough terrain ahead. With the ability to retain your OE control arms, J-Kontrol JSpec Series systems step up the rest of your suspension, starting with front control arm correction brackets. They drop the frame-side pivot mounts to restore handling characteristics, saving you the cost of new control arms, and they work seamlessly with your Jeep's stock control arms to correct caster. These J-Kontrol kits are highlighted with a set of JSpec shocks specifically tuned to their JKS springs for amazing performance and ride quality. Other key components in these lift kits--high performance dual-rate coil springs, adjustable track bar(s), and Quicker Disconnect sway bar end links--deliver the enhanced performance you need for a comfortable and confident ride, whether daily driving, beach cruising, or for regular trail use. Get increased clearance and performance with exceptional stability on- and off-road; select the JKS J-Kontrol lift kit designed for your Jeep. JSpec Series shocks feature: * Gas shocks * Affordable steel-body, twin-tube shocks * IFP design eliminates oil aeration * Valved specifically for JSpec systems * Direct bolt-in replacement * Designed to work with lift kits and oversized tires
Not Yet Reviewed
$1,605.65
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 120 )
$1,332.95
—
$1,791.95
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
