Free Shipping on Orders Over $109 at Summit Racing

On Sale

Holley Dual In-Tank Pumps

If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed

Not Yet Reviewed

$1,299.95

$1,168.95

Vibrant Performance Braided PTFE Hose

Vibrant Performance braided PTFE hose present endless ways to build your high performance fluid delivery system. They are available in many lengths and AN sizes with either a stainless steel or nylon braided covering that offers superior protection against abrasion and corrosion. The PTFE inner liner can handle higher operating temperatures, operating or burst pressures, and eliminates vapor fuel permeation. These race-proven hoses are suitable for all types of commonly used race fuels and oils, as well as brake, transmission, clutch, power steering, and coolant fluids. Vibrant Performance braided PTFE hose deliver outstanding quality and options to make your plumbing project a success.

4.17 out of 5 stars ( 42 )

$1,099.99

Holley Ford 351W Hi-Ram EFI Intake Manifold Bases

Holley Ford 351W Hi-Ram EFI intake manifold bases feature runner lengths and tapered cross sections designed to perform well for a wide range of engine combinations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race–bred styling will make bad intentions clear for drag race, muscle car, marine, off–road, sand rails, pulling trucks, track, street rod applications and more! Features include: * Cast aluminum construction * The 351W manifold is available to work with 95mm or 105mm GM LS throttle bodies * EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system * Plenum top gasket-type--3/32 in. round O-ring cord * Manifold is designed for a 9.5 in. deck height * Requires the use of Holley EFI dual sync distributor

Not Yet Reviewed

$1,024.95

Snow Performance Universal Multi-Pump Fuel Hats

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps? Snow Performance offers you a solution with their multi-pump fuel hats that feature a billet aluminum manifold with CNC-machined passages, making them the nicest high-output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC-machined bodies hold the fuel pumps securely and feature Viton® chemical-resistant O-rings to ensure a perfect leak-free fit. The billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow Performance fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory. To meet your specific vehicle's fuel demands, these assemblies are configurable with a combination of two or three fuel pumps. Select the universal multi-pump fuel hats designed for your application needs. Key features: * Fuel hats are engineered, CNC-machined and built from 6061 billet aluminum * CNC-machined body holds the fuel pump(s) securely and feature Viton chemical-resistant O-rings to ensure a perfect leak-free fit * Billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels * Fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory * Design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. * No detail has been overlooked with these assemblies * Fuel hats feature female AN ORB feed and AN ORB return ports * Fittings are sold separately to adapt to your desired combination of 10AN, 8AN, or 6AN lines Pump configurations are shown below to help assist with your selection: -- 2 Pump Streetable configuration (one 450lph pump and one 470lph pump)—this configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline -- 3 Pump Streetable configuration (one 450lph pump and Two 470lph pumps)—this configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline and draws 10-12 percent less current than the "Race" 3 pump version -- 3 Pump Race configuration (three 470lph pumps—this configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline and is designed for max/effort/flow

Not Yet Reviewed

$1,195.43

Jaz Products Pro Sport Fuel Cells with 90 Degree Filler/Flapper and Cap

Jaz Pro Sport fuel cells with 90 degree filler/flapper and cap equip your race car with quality, value, and most importantly--safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They are set up with one -8AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their long list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * Vented twist lock cap with spring-loaded flapper * One -8AN tip over valve vent fitting * 2 1/2 in. neck diameter with 2 in. height

Not Yet Reviewed

$1,030.99

—

$1,067.99

Jaz Products JEEPSpeed Fuel Cells

These JEEPSpeed fuel cells by Jaz Products are designed to fit between the frame rails of 1984-2001 Jeep Cherokees. These 32 gallon fuel cells are foam-filled and have a 45 degree 2 1/2 in. fill valve and an oval fill plate. They include a cast aluminum bat wing pick-up, a -10 tip over vent, a -8 return fitting, and a -8 pick-up. They're great for Pre-Truck runners, too!

4.0 out of 5 stars ( 1 )

$1,065.99

Aeromotive SS Fuel Pump Kits

Aeromotive SS fuel pump kits provide everything you need to completely install a fuel system on your street rod, muscle car, or Pro Street vehicle. Universal kits are ideal if a system for your specific application does not yet exist—or you already have a sumped tank or fuel cell. These kits include fuel pump, two billet fuel filters, braided lines, hose ends, fittings, wiring, a relay, and all hardware to install the systems on virtually any car. They support a wide range of performance, from 250 to over 2,000 hp, for both fuel injected and carbureted applications. Whether you have a street car, race car, or boat, Aeromotive SS fuel pump kits are the right choice. Kit contains: * Fuel pump * Fuel pump wiring kit * 2 fuel filters * 20 ft. -8 AN stainless steel braided line * 2 each -8 AN straight hose ends * 2 each -8 AN 90-degree hose ends * 2 each 3/8-NPT hex nipples * 2 each 3/8-NPT to -08 AN fittings * 12 tie-wraps

Not Yet Reviewed

$1,037.10

On Sale

Holley EFI LS Hi-Ram Intake Manifolds

Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.

3.79 out of 5 stars ( 39 )

$1,177.95

—

$1,349.95

$1,059.95

—

$1,213.95

On Sale

Holley SBF Hi-Ram EFI Intake Manifolds

Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)

4.2 out of 5 stars ( 5 )

$1,299.95

$1,168.95

—

$1,299.95

Fleece Performance Transmission Cooler and Line Kits

Fleece Performance transmission cooler and line kits are drop-in replacements that deliver a massive 2 times increase in heat rejection and efficiency vs. stock! Control your transmission temperatures and tow with confidence with the latest improvement for your truck from Fleece Performance. Engineered from the ground up, these kits provide you with the most efficient and highest performing transmission cooler on the market, plus heavy-duty transmission lines and AN fittings for a leak-free installation. Fleece transmission cooler and line kits are the most complete options available to keep your rig running cool! Select the kit designed for your truck. Additional features: * Drop-in replacement for the factory transmission cooler * No cutting or splicing of OE lines * 20 percent increase in face area of the transmission cooler vs. stock * 100 percent pressure and leak tested

5.0 out of 5 stars ( 1 )

$1,479.00

On Sale

Holley EFI LS Mid-Rise Intake Manifolds

Holley EFI LS Mid-Rise intake manifolds are designed for your high performance race engine. They're an excellent choice for street and performance street/strip applications. They're intended for big cube and high-rev applications without height limitations. The modular design of these manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Mid-Rise intake manifold bases from Holley.

2.14 out of 5 stars ( 7 )

$1,126.95

—

$1,177.95

$1,013.95

—

$1,059.95

On Sale

Holley EFI LT1 Gen V Hi-Ram Intake Manifolds

Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band

5.0 out of 5 stars ( 2 )

$1,177.95

—

$1,349.95

$1,059.95

—

$1,213.95

On Sale

Holley 351W Ford Hi-Ram EFI Intake Manifolds

Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.

3.2 out of 5 stars ( 5 )

$1,399.95

$1,258.95

On Sale

Holley SBF Hi-Ram EFI Intake Manifolds with Side-Mount Tops

Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold

Not Yet Reviewed

$1,299.95

$1,168.95

—

$1,349.95

On Sale

Holley EFI Gen III Hemi Hi-Ram Intake Manifolds

Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles

4.0 out of 5 stars ( 2 )

$1,349.95

—

$1,549.95

$1,213.95

—

$1,393.95

Aeromotive Eliminator Stealth Fuel Cells

Aeromotive Eliminator Stealth fuel cells feature their built-in Eliminator electric fuel pump and a 100 micron stainless steel prefilter. They can be mounted anywhere in any car. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and you're done. You won't have to search any longer for a place to mount your fuel pump and pre-pump filter. Through an innovative baffling system inside of the cells, the fuel pump inlet always has a constant column of fuel. In addition, the Aeromotive Eliminator Stealth fuel cells' baffling keeps fuel at that same point, even during extreme driving conditions, making them perfect for off-road vehicles, drag racing, and even autocross and drifting. Plus, the pump is inside of the cells, so noise is drastically reduced, and the fuel pump runs cooler longer, ensuring longevity and drivability. Additional features include: * Available in 15 or 20 gallon capacity * All-aluminum construction * TIG-welded * Flush mount lid assembly * Two -8 AN rollover valves * Universal 0-90 ohm built-in fuel level sending unit * -8 AN return fitting for bypass line from the fuel pressure regulator

1.0 out of 5 stars ( 1 )

$1,259.95

Aeromotive A1000 Stealth Fuel Cells

Aeromotive A1000 Stealth fuel cells feature a built-in Aeromotive A1000 fuel pump and a 100 micron stainless steel prefilter. They can be mounted anywhere in any car. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and you're done. You won't have to search any longer for a place to mount your fuel pump and pre-pump filter. Through an innovative baffling system inside of the cells, the fuel pump inlet always has a constant column of fuel. In addition, the Aeromotive A1000 Stealth fuel cells' baffling keeps fuel at that same point, even during extreme driving conditions, making them perfect for off-road vehicles, drag racing, and even autocross and drifting. Plus, the pump is inside of the cells, so noise is drastically reduced, and the fuel pump runs cooler longer, ensuring longevity and drivability. Additional features include: * Available in 15 or 20 gallon capacity * All-aluminum construction * TIG-welded * Flush mount lid assembly * Two -8 AN rollover valves * Universal 0-90 ohm built-in fuel level sending unit * -8 AN return fitting for bypass line from the fuel pressure regulator

3.0 out of 5 stars ( 6 )

$1,008.65

On Sale

Holley Sniper EFI Fabricated Race Series Intake Manifolds

Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.

4.0 out of 5 stars ( 1 )

$1,449.95

$1,303.95

FiTech Nitro-Port Cast LS3 1000 HP EFI Loaded Intake Manifold Kits

FiTech Nitro-Port cast LS3 1000 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.

Not Yet Reviewed

$1,200.00

Jaz Products Pro Sport Fuel Cells with 45 Degree Flapper Filler

Jaz Pro Sport fuel cells with 45 degree flapper filler will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their long list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * 45 degree filler neck with spring-loaded flapper 4 1/4 in. high * Choice of 2 1/4 in. or 2 1/2 in. neck diameter * One -8 AN tipover valve vent fitting

4.2 out of 5 stars ( 5 )

$1,064.99

—

$1,096.99

FiTech Nitro-Port Cast LS3 750 HP EFI Loaded Intake Manifold Kits

FiTech Nitro-Port cast LS3 750 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.

Not Yet Reviewed

$1,200.00

FiTech Nitro-Port Cast LS3 500 HP EFI Loaded Intake Manifold Kits

FiTech Nitro-Port cast LS3 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.

Not Yet Reviewed

$1,200.00

Jaz Products Pro Sport Fuel Cells with Fill Valve and Steel Cap

Jaz Pro Sport fuel cells with fill valve and steel cap will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their lengthy list of sizes, shapes, and capacities is intended to meet your needs and wants perfectly. Jaz Pro Sport fuel cell features: * IMCA-approved * One -8 AN tipover valve vent fitting * Spring-loaded flapper for rollover protection* Large 4 in. diameter steel cap allows quick removal and easy filling

Not Yet Reviewed

$1,064.99

—

$1,252.99

FiTech Nitro-Port Cast LS1 500 HP EFI Loaded Intake Manifold Kits

FiTech Nitro-Port cast LS1 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.

Not Yet Reviewed

$1,200.00

35 Results Found For "8an fitting"