Availability
FAST XFI 2.0/XIM Super Cobra jet engine wiring harnesses are designed to integrate with the factory vehicle harness, switch panel, and other components of Cobra Jet engines. It's the same system used by top NHRA and NMCA Stock Eliminator and Super Stock racers such as Anthony Bongiovanni, Gary Richard, Jeff Roell, P.B. Candies, Randy Eakins, Roy Hill, Don Bowles, Susan McClenaghan and Chuck Watson. The wiring harness offers several mounting options for the ECU and ignition module. It also features heavy-duty heat and abrasion-resistant sheathing with heat-shrink-sealed ends on the underhood portion. There's double EMI shielding on critical harness leads, plus durable braided nylon sheathing on the under-dash portion of the harness. It's compatible with Ford 5.4 Modular and 5.0 Coyote engines, either naturally aspirated or supercharged. Each harness includes a detailed vehicle-specific installation guide for integrating the engine harness to the factory switch panel, factory Launch Control/2-Step function, and factory gauges. This allows for simple data-logging of factory-installed sensors like fuel pressure, oil pressure, and brake pressure into the XFI 2.0 ECU. No cutting or trimming is required if the FAST XFI 2.0/XIM Super Cobra jet engine harness is installed as directed. This saves 30-40 hours building labor and results in a neat, factory-appearing installation. Every harness is also 100 percent tested to ensure optimum performance.
Not Yet Reviewed
$1,528.95
Ford Performance Parts teamed up with Jon Kaase to redesign their 429 Cobra Jet cylinder heads, and the results are these Super Cobra Jet heads. They feature revised valve angles and locations to reduce cylinder wall shrouding and improve flow, along with redesigned combustion chambers to accommodate the more centrally located valves. These heads use the same valves, valve springs, retainers, and 7/16 in. stud-mounted roller rockers as the current Ford Performance Parts 429 Cobra Jet heads, and the standard Cobra Jet intake and exhaust manifolds bolt right on. This new design offers a 25-50 HP increase over current Cobra Jet heads, depending upon displacement and camshaft.
( 13 )
$1,209.99
Pack some more power into your Coyote-powered Mustang with Ford Performance Parts 5.0L 4V Cobra Jet intake manifolds. These manifolds were original equipment on 2013 Mustang Cobra Jet factory race cars and are proven to give you power increases without sacrificing torque. They are constructed from lightweight composite material that is extremely durable, even under racing conditions, but is still compatible with production fuel rails. To beef up the power band, the engineers at Ford Performance Parts utilized the larger GT500/Cobra Jet throttle body and optimized the runners to make peak power at 7,750 rpm, making your car a beast at the track. Don't mess around with unproven parts when you can get track-proven results with Ford Performance Parts 5.0L 4V Cobra Jet intake manifolds. Additional features include: * Significant power increase above the M-9424-M50BR Ford Performance Parts Boss 302 intake manifold with no loss of torque * Total intake volume 635 cubic inches * Designed and tested to 20+ psi * O-ring intake gaskets included * Requires throttle body M-9926-MSVT, M-9926-CJ65, or M-9926-SCJ * Requires Cobra Jet 5.0L Cold Air Kit M-9603-M50CJ to mate to oval throttle body * Mustang GT requires installation kit M-9444-M50B or equivalent (inlet hose in kit not used) * Not compatible with strut tower brace * CJ inlet tube does not have provisions for aspirator tube hook up common to automatic-equipped 2011-14 Mustang GT * Calibration is necessary to prevent engine damage! * Calibration not included!
Not Yet Reviewed
$1,381.99
Mahle PowerPak pistons are forged pistons with steel pins and wire locks. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. Part numbers with T on the end have a cutting edge ceramic-based thermic barrier. The barrier is resistant to thermal shock, insulates the piston crown, and reduces heat transfer to increase performance. These replacement pistons are available in a wide variety of size options for fitment with specific engines and pistons.
( 2 )
$1,034.78
Mahle PowerPak Piston Kits and ring kits include forged pistons with steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines.
Not Yet Reviewed
$1,034.78
3030 Autosport Drag Ops Series Launch double beadlock wheels feature a timeless 5-spoke pattern, a polished satin jet black finish, and scalloped functional beadlock rings. The 2-piece forged aluminum street/strip rims are designed for big horsepower at the track and built to handle the street. All Drag Ops wheels are SFI-certified and stickered for the tech tent. 3030 Autosport beadlocks are engineered for optimum lockdown on Goodyear and Hoosier Tires—and the unique bead of Mickey Thompson tires. The beadlocks have an aggressive knurl for locking the tire in place. Launch 15 in. rear drag wheels are set up for both mag shank lug nuts and 5/8 in. racing studs. Select the wheel width, offset, backspacing, and bolt circle designed for your application needs.
Not Yet Reviewed
$1,089.99
Bringing style and function to racing, 3030 Autosport Drag Ops Series MACH-10 double beadlock wheels are perfect for those who want a new, radical fearless design. The MACH 10's feature a tapered 10-spoke pattern with deep lips that add aggressive styling to your ride, plus low lateral and radial runout. These Drag Ops Series wheels sport a jet black finish with polished barrel and scalloped functional beadlock ring with 3030 Autosport logo branding. The 2-piece forged aluminum street/strip rims are designed for big horsepower at the track and built to handle the street. All Drag Ops wheels are SFI-certified and stickered for the tech tent. 3030 Autosport beadlocks are engineered for optimum lockdown on Goodyear and Hoosier Tires—and the unique bead of M/T tires. The beadlock has an aggressive knurl for locking the tire in place. Launch 15 in. rear drag wheels are set up for both mag shank lug nuts and 5/8 in. racing studs. Select the Drag Ops Series MACH-10's in the width, offset, bolt pattern and other fitment options needed for your race application.
Not Yet Reviewed
$1,089.99
Stay ahead of the competition with 3030 Autosport Drag Ops Series Legend Jet Black/polished double beadlock wheels that feature a unique multi-spoke mesh design with deep lip that adds aggressive styling to your ride, plus low lateral and radial runout. The Drag Ops Series Legend wheels sport a jet black satin finish with polished barrel, and a scalloped functional beadlock ring featuring 3030 Autosport logo branding. These 2-piece forged aluminum rims are designed for big horsepower at the track and built to handle the street. All Drag Ops wheels are SFI-certified and stickered for the tech tent. 3030 Autosport beadlocks are engineered for optimum lockdown on Goodyear and Hoosier Tires—and the unique bead of M/T tires. The beadlock has an aggressive knurl for locking the tire in place. Launch 15 in. rear drag wheels are set up for both mag shank lug nuts and 5/8 in. racing studs. Select the width, offset, backspacing, and bolt circle pattern for your vehicle's race application.
Not Yet Reviewed
$1,089.99
Stay ahead of the competition with a set of 3030 Autosport Drag Ops Series Legend Jet Black/Polished double beadlock wheels. The classic mesh pattern features 10 split-spokes and deep lips that add aggressive styling to your ride: plus low lateral and radial runout. These 2-piece lightweight 6061-T6 forged aluminum wheels are SFI 15.1 certified. Legend street/strip wheels have a polished jet black finish with scalloped functional beadlock rings. 3030 Autosport beadlocks are engineered for optimum lockdown on Goodyear and Hoosier tires, and the unique bead of Mickey Thompson tires. Select the Drag Ops Legend Jet Black/Polished wheel in the width, offset, bolt pattern and other fitment options designed for your application needs.
Not Yet Reviewed
$1,089.99
Stay ahead of the competition with a set of 3030 Autosport Drag Ops Series MACH-10 double beadlock wheels. They feature a tapered 10-spoke design with deep lips that add aggressive styling to your ride, plus low lateral and radial runout. The 2-piece lightweight 6061-T6 forged aluminum wheels are SFI 15.1 tested and certified. MACH-10 street/strip wheels have a polished jet black finish with scalloped functional beadlock rings. 3030 Autosport beadlocks are engineered for optimum lockdown on Goodyear and Hoosier tires, and the unique bead of Mickey Thompson tires. Select the width, offset, bolt pattern and other fitment options needed for your vehicle.
Not Yet Reviewed
$1,089.99
3030 Autosport Drag Ops Series Launch double beadlock wheels are perfect for those who want top level performance, lightweight, minimal deflection and outstanding design. The wheels feature a timeless 5-spoke pattern, a satin black finish with polished barrel, and a scalloped functional beadlock ring featuring 3030 Autosport logo branding. The 2-piece forged aluminum street/strip rims are designed for big horsepower at the track and built to handle the street. All Drag Ops wheels are SFI-certified and stickered for the tech tent. 3030 Autosport beadlocks are engineered for optimum lockdown on Goodyear and Hoosier Tires—and the unique bead of M/T tires. The beadlocks have an aggressive knurl for locking the tire in place. Launch 15 in. rear drag wheels are set up for both mag shank lug nuts and 5/8 in. racing studs. Select the width, offset, backspacing, and bolt circle pattern for your vehicle's race application.
Not Yet Reviewed
$1,089.99
Nitrous Outlet EFI single nozzle systems come with more jets to set horsepower exactly where you want it. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and a nozzle. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. Get Nitrous Express race-proven systems because of their quality components and extreme performance.
Not Yet Reviewed
$1,098.99
—
$1,182.99
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,425.00
Strange Engineering's stainless steel brake kits are designed for drag racing's most abusive applications, offering drag racers a safer and more efficient alternative to conventional carbon steel brakes. Strange's Dynamic Drive Mount (DDM) system secures the stainless rotor with an internal Spirolox--eliminating all thermally generated stress from rotor attachment points and further reducing rotating weight. The system also permits the hat and rotor to expand and contract independently, allowing for thermal expansion, which drastically reduces warping, coning, and cracking. Strange Evolution Dynamic Drive Mount brake kits feature Evolution S DDM stainless steel rotors machined from premium stainless billets, proprietary heat treated, and fully ground. The kits also contain Evolution 4 calipers, high performance metallic or semi-metallic brake pads, additional components, and hardware. Together they produce more efficient accelerating and stopping of your drag racing vehicle. Kits are available for front or rear. Choose those designed for your vehicle. Evolution S DDM rotors: * Mounts to billet aluminum DDM hat reducing rotating weight * Exhibits 48 percent greater yield strength at 1,000 degrees F compared to carbon steel, further maintaining rotor integrity * Highly resistant to heat and corrosion * Unique Aero Slot design reduces rotating weight and promotes even heat dissipation, compared to common round drilled holes * Scalloped design further reduces rotating weight 4-piston billet Evolution 4 calipers: * Computer finite element analysis (FEA) optimized and field-tested caliper -- Design improves piston retraction, pedal feel, and stiffness -- Results in improved pad wear and exemplary braking efficiency * High-retraction piston and O-ring design to eliminate drag during acceleration * Stainless steel pistons mitigate heat transfer to brake fluid * Reverse dish pressure vessel piston maximizes stiffness * All 1.750 in. pistons provide increased clamping force * Type II black anodized finish resists corrosion, heat, and brake fluid Aluminum caliper mounts: * Billet one piece design * Eliminates bolts, spacers, and nuts that require periodic maintenance Brake pads: * DTC-30 semi-metallic brake pads -- Available in rear or front kits -- Provides the best starting line cold holding power -- Recommended for vehicles going 150 mph or less in the 1/4 mile * DRM-35 metallic brake pad -- Available in rear kits only -- Provides high resistance to brake fade -- Recommended for vehicles going over 150 mph in the 1/4 mile -- Maintains decent starting line cold holding capabilities -- May leave pad residue on rotors when not using parachute -- While common, it's recommended to remove when installing new pads Housing end stud kits: * Rear kits * Provides additional components not supplied in most aftermarket kits Screw-in wheel studs: * Front kits * Tapered Allen 1/2 in.-20 x 2 1/2 in. Billet aluminum hubs: * Front kits * Strong lightweight material * Lightening holes for enhanced weight reduction * Billet hub caps with O-rings and Strange branding * Bearings, races, and seals
Not Yet Reviewed
$1,349.99
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits with XR wrist pins for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include piston rings and XR wrist pins for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,054.95
—
$1,114.95
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,099.95
—
$1,399.95
Ford Performance Parts Z2 Velocity Vane cylinder heads improve power throughout the rpm range. Developed with advanced computer-aided engineering simulation tools, Ford Z2 aluminum heads feature their unique Velocity Vane intake port design that delivers outstanding street/strip power. These high performance cylinder heads are direct bolt-ons for Ford 289/302/351W engines, and they retain OEM exhaust, intake, and accessory mounting locations. Ford Z2 Velocity Vane cylinder head specs: * Cast from prime 356 T6 aluminum * Heads retain Ford OEM intake and exhaust port location and flange * Velocity Vane in port floor directs airflow around the valve stem, leading to more horsepower and torque throughout the full power range * 20 degree inline valve angle * Premium stainless steel valves: 2.05 in. intake, 1.60 in. exhaust valves * PAC 1219X conical-style valve springs with machined retainers and 10 degree machined valve locks--most hydraulic cams can be used with these springs * Valve spring closed pressure: 145 lbs. at 1.800 in. * Valve spring open pressure: 358 lbs. at 1.175 in. * Coil bind at 1.100 in., 0.650 in. max lift * Includes laser-cut guide plates for use with 5/16 in. pushrods and 7/16 in. rocker studs * Steel alloy intake and exhaust valve seats * Manganese-bronze valve guides * 63cc combustion chamber
( 2 )
$1,306.99
Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning
( 56 )
$1,249.95
—
$1,549.95
Transfer power into motion with ACT Xtreme twin-disc clutch kits. Available for street and race use, these clutch kits feature twice the number of disc surfaces for better wear, heat capacity, and long life compared to single disc kits. They offer a proprietary Positive Lift Floater System design, which results in quiet operation with no floater rattle and no posts to wear. Maximize your street and track performance with the solid quality and exceptional value of ACT Xtreme twin-disc clutch kits. More product features include: * CNC-machined and dynamically balanced flywheel ensures trouble-free installation and operation * 40 to 120 percent pressure plate clamp load increase * Pedal feel is stiff to moderate * Recommended disc: Street/Race
( 3 )
$1,635.00
—
$1,722.00
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 11 )
$1,417.99
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,076.50
—
$1,578.50
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$1,099.95
—
$1,399.95
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 605 )
$1,083.00
Ford Performance Parts Z-Series aluminum cylinder heads provide increased intake and exhaust airflow and are available for Ford small block Windsor engines. They were designed using solid modeling technology from prime A356 T-6 aluminum and feature high-flow ports, steel alloy intake and exhaust valve seats, and manganese-bronze valve guides. Ford Z-Series heads accept both tapered seat and gasket-style 14mm spark plugs and are available as-cast or CNC-ported, both bare and assembled. Select heads are also offered with advanced "Velocity Vane" intake port design that delivers outstanding street/strip power. Developed with advanced computer-aided engineering simulation tools, their unique intake port design improves power throughout the rpm range. Velocity Vane cylinder heads are a direct bolt-on and retain OEM exhaust, intake, rocker arm, and accessory mounting locations. Features include (some vary depending on version): * A variety of combustion chamber volumes * Cast with high-flow ports * 20 degree inline valves * Steel alloy intake and exhaust valve seats * 7/16 in. screw-in studs (not included on bare heads) * Requires 1.5:1 ratio roller rocker arms with .150 in. offset intake pushrod cup (not included) * Assembled heads include laser-cut guide plates for 5/16 in. pushrods and 7/16 in. rocker studs * Premium stainless steel intake and exhaust valves (with assembled heads) Notes: * As-cast bare heads require competition valve job and bowl blending * Custom headers may be required for heads with raised exhaust port exits * Check intake manifold for port match; not all intakes are compatible due to the tall high-flow ports (does not fit M-9424-Z51/-Z51P) * Check piston-to-valve clearance, including radial valve clearance, before installing
( 1 )
$1,042.99
—
$1,154.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
