Availability
HalTech's Elite 550 is a simple yet powerful ECU ideal for basic 4- to 8-cylinder or 1-2-rotor engine applications. Suitable for either naturally aspirated or forced induction engines, the Elite 550 gives you full control over fuel delivery, ignition timing and boost levels. This robust, competitively priced ECU features an environmentally sealed, waterproof case, four fuel and four ignition channels, and a 4 BAR internal MAP sensor. The Elite 550 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional details: * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Sequential, semi-sequential, batch or multipoint injection patterns * Ignition modes include direct fire multi-coil, distributor ignition, or HalTech CDI systems * Connect to a wide range of dashes, displays, and expansion devices via CAN * Waterproof case (IP67) with USB cover fitted * 34 position AMP connector * 4 x fuel injection outputs (peak and hold (0-8 amps peak / 0-2 amps hold) * 4 x ignition outputs * 2 x dedicated engine position inputs with extensive trigger type support * 1 x digital pulsed input * 5 x digital pulsed outputs * 1 x analog voltage input * 3 x dedicated inputs (Throttle Position, Coolant Temperature, and Air Temperature) * Internal 4 Bar MAP sensor measuring up to 300kPa/3Bar/45psi of boost pressure * Up to 33 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) --- ECU FUNCTIONS: * Oxygen control: Closed loop with long-term learning for precise tuning (with optional external CAN O2 wideband controller kit) * Boost control: Closed loop with learning with flexible user-definable axis and six fully user-definable corrections modes (for example, boost by gear, road speed etc.) * Flex fuel function (direct sensor input): Tune your engine's boost, fuel and ignition by ethanol content * Low impedance injector control with programmable injector peak and hold currents * Closed loop idle speed control: requires 1 or 2 user-defined outputs (BAC type) * On-board and laptop data logging: Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics * CAN Bus communication for HalTech dashes and expansion devices or OBDII (view live engine data and set and clear diagnostic trouble codes) * 2 injection stages for use with rotary engines --- ADVANCED TUNING: * Tuning table resolution up to 32 x 16 * Tune your engine by a combination of 3-D tuning tables combined with 3-D per cylinder compensations and multiple user-definable corrections * Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height, or any channel for ultimate flexibility. * Per cylinder tuning correction – 3-D * Wideband O2: Connect up to 3 channels via CAN expansion devices * Thermocouples / EGT (Exhaust Gas Temperature): Connect up to 12 channels via external CAN expansion devices * Independently control up to 2 camshafts. Requires a minimum of one user-defined input and output per variable cam --- HARNESS OVERVIEW: * Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your HalTech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * When installed in conjunction with a HalTech Elite ECU, the harness opens the door to virtually limitless performance modification and tuning of your vehicle.
Not Yet Reviewed
$1,210.00
HalTech's Elite 550 is a simple yet powerful ECU ideal for basic 4- to 8-cylinder or 1-2-rotor engine applications. Suitable for either naturally aspirated or forced induction engines, the Elite 550 gives you full control over fuel delivery, ignition timing and boost levels. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and 4 ignition channels, and a 4 BAR internal MAP sensor. The Elite 550 ECU is paired with the Nexus Software Programmer that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer cutting-edge technology to tuners and performance enthusiasts worldwide. Additional details: * Premium universal wire-in harnesses are available in 8 ft. or 16 ft. lengths * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Sequential, semi-sequential, batch or multipoint injection patterns * Ignition modes include direct fire multi-coil, distributor ignition, or HalTech CDI systems * Connect to a wide range of dashes, displays, and expansion devices via CAN * Waterproof case (IP67) with USB cover fitted * 34 position AMP connector * 4 x fuel injection outputs (0-8 amps peak / 0-2 amps hold) * 4 x ignition outputs * 2 x dedicated engine position inputs with extensive trigger type support * 1 x digital pulsed input * 5 x digital pulsed outputs * 1 x analog voltage input * 3 x dedicated inputs (Throttle Position, Coolant Temp, and Air Temp) * Internal 4 Bar MAP sensor measuring up to 300kPa/3Bar/45psi of boost pressure * Up to 33 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) --- ECU FUNCTIONS: * Oxygen control: Closed loop with long-term learning for precise tuning (with optional external CAN O2 wideband controller kit) * Boost control: Closed loop with learning with flexible user-definable axis and six fully user-definable corrections modes (for example, boost by gear, road speed etc.) * Flex fuel function (direct sensor input): Tune your engine's boost, fuel and ignition by ethanol content * Low impedance injector control with programmable injector peak and hold currents * Closed loop idle speed control: requires 1 or 2 user-defined outputs (BAC type) * On-board and laptop data logging: Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics * CAN Bus communication for HalTech dashes and expansion devices or OBDII (view live engine data and set and clear diagnostic trouble codes) * 2 injection stages for use with rotary engines --- ADVANCED TUNING: * Tuning table resolution up to 32 x 16 * Tune your engine by a combination of 3-D tuning tables combined with 3-D per cylinder compensations and multiple user-definable corrections * Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height, or any channel for ultimate flexibility. * Per cylinder tuning correction – 3-D * Wideband O2: Connect up to 3 channels via CAN expansion devices * Thermocouples / EGT (Exhaust Gas Temperature): Connect up to 12 channels via external CAN expansion devices * Independently control up to 2 camshafts. Requires a minimum of one user-defined input and output per variable cam --- HARNESS OVERVIEW: * Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your HalTech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * When installed in conjunction with a HalTech Elite ECU, the harness opens the door to virtually limitless performance modification and tuning of your vehicle.
Not Yet Reviewed
$1,291.99
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,027.99
—
$1,499.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
