Availability
On Sale
Hooker Blackheart engine swap exhaust systems are designed to offer the best available ground clearance and fit, along with easy installation. They use factory mounting points for stock-like fitment and are designed for clearance with OE or aftermarket adjustable rear upper control arms. Order the Hooker Blackheart engine swap exhaust kit best suited for your engine swap application. Features: * Full 2.5 in. or 3 in. (depending on application) diameter system for maximum flow/horsepower potential * Constructed from lightweight, 18-gauge, mandrel-bent, 304 or 409 stainless steel (depending on application) for maximized strength and durability * Optimized bend geometry provides clearance for wide rear wheels/tires (in the factory wheel well) * Tube geometry designed for maximum clearance and hassle-free installation with all necessary installation hardware included * Manufacturer's limited lifetime warranty
Not Yet Reviewed
$1,349.95
—
$1,499.95
$1,213.95
—
$1,348.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,147.95
—
$1,549.95
$1,032.95
—
$1,393.95
On Sale
Manley Pro Series crankshafts can make your short block bulletproof. They feature forged 4340 construction and undergo a multi-step heat-treatment process and are then nitrided for added strength. The crankshafts are stress-relieved, shot-peened, and magnafluxed. Manley Pro Series crankshafts have micro-polished large .125 in. radius journals, gun-drilled mains, and lightened rod journals for weight reduction. The counterweights are fully profiled and they are designed for internal balancing.
( 10 )
$1,269.68
$1,206.20
On Sale
Pypes header/crossmember-back exhaust systems are designed to boost your car's performance to the next level with more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
( 13 )
$1,084.79
—
$1,091.79
$1,044.79
—
$1,051.79
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$1,232.79
—
$1,237.79
$1,192.79
—
$1,197.79
On Sale
Pypes Street Pro exhaust systems are designed to boost your car's performance to the next level—you'll get more power, better mileage, and a rich, throaty tone that can't be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel mufflers. Don't let the looks of these mufflers fool you. Although at idle, you may cause passengers to reach for their seat belts—upon acceleration, a smooth, authoritative tone turns apprehension into a reassuring confidence. These great street/strip mufflers will maintain their rich sound qualities for life because there is no filler to burn off. They're recommended for stock to medium-modified vehicles where an aggressive sound is appreciated but not advertised. Pypes Street Pro exhaust systems include stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 200 )
$1,165.79
—
$1,235.79
$1,125.79
—
$1,195.79
On Sale
Built to outflow and outlast factory exhausts, Pypes Violator dual systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel Violator mufflers. These mufflers flow as much air as the Race Pro mufflers but have an incredibly unique and aggressive sound—the result of an internal louvered tube with sound deflector chambers. If you want to be noticed, these are your mufflers! Pypes exhaust systems include stainless steel or cadmium plated hangers, clamps, and instructions; and they have slip-fit connections for a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 150 )
$1,228.79
—
$1,233.79
$1,188.79
—
$1,193.79
On Sale
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,425.00
—
$1,685.00
$1,282.50
—
$1,516.50
On Sale
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
—
$1,480.00
$1,035.00
—
$1,332.00
On Sale
Manley Platinum Series pistons are designed to provide trouble-free installation, excellent reliability, and maximum horsepower for your application. Available in 2618 and 4032 forgings, they provide the optimum balance between strength and weight, with no grain-interrupting internal milling. The Platinum Series pistons' 2618 alloy offers maximum high-temperature strength and fatigue resistance, while the 4032 alloy is ideal for moderate-horsepower street applications. Order the style and size pistons designed for your vehicle and engine.
( 6 )
$1,080.83
$1,026.79
JE Pistons 400/440 Wedge dome top pistons are an all-new design that accommodate intake valve diameters up to 2.250 in. and accept long-duration, tight lobe separation cams. They're available with either .990 in. or 1.094 in. diameter wrist pins. These pistons are machined for 1/16, 1/16, 3/16 rings.
Not Yet Reviewed
$989.99
On Sale
We matched up high performance clutch parts to form these Summit Racing™ clutch, flywheel, and mounting hardware Pro Packs. They're available for hundreds of Ford, GM, and Mopar applications from the 1950s and up. Convenient and economical, Summit Racing™ Pro Packs save you the legwork with the correct parts to complement each other. Pro Packs include: * RAM HDX series clutch kit * Billet steel flywheel * Hydraulic throwout bearing * Pressure plate bolts and flywheel bolts
( 4 )
$1,080.10
—
$1,199.10
$1,042.20
—
$1,161.20
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$1,349.99
$1,214.99
These JE Pistons 440 inverted dome top pistons are designed for high performance street/strip applications and are compatible with nitrous and forced induction systems. They are machined to accept 1/16, 1/16, 3/16 rings and come available in either .990 in. or 1.094 in. wrist pin diameters. For other specific applications, please check with the manufacturer.
Not Yet Reviewed
$989.99
JE Pistons small block Chrysler inverted dome top pistons are designed for use in high performance street/strip machines and are compatible with turbocharged, nitrous, and forced induction systems. Machined to accommodate large valve and long-duration, tight lobe separation cams, these pistons are machined for 1/16, 1/16, 3/16 rings and .927 in. diameter wrist pins.
Not Yet Reviewed
$989.99
On Sale
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 36 )
$1,249.95
$1,123.95
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$1,125.51
—
$1,157.51
$1,021.51
—
$1,050.51
On Sale
RevMax Ultra Low Stall Stage 5 triple-disc billet torque converters are designed for those who have heavily modified engines or for those that tow heavy weights. The showpiece of these converters is the RevMax patented torque converter stator sprag retainer. This technology cannot be purchased anywhere else! Unlike most of the competition, RevMax has redesigned the lockup clutch piston to be able to accommodate a piston damper. The billet piston and damper allow the clutch to apply smoother—which in turn puts far less strain on the input shaft. RevMax Stage 5 converters have no horsepower or torque limitations. They're available for a variety of applications, including many Dodge and RAM trucks with Mopar transmissions from the 1990s and up. Additional details: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance triple disc lockup frictions * Billet lockup apply piston with performance spring damper * RevMax proprietary CNC-machined stator designs * RevMax patented sprag retainer * RevMax proprietary input shaft seal * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested * TCRS computerized high-speed balancing to less than 5 gram * Runout tolerances of less than .005
Not Yet Reviewed
$1,399.00
—
$1,649.00
$1,329.05
—
$1,566.55
On Sale
RevMax Low Stall Stage 5 triple-disc billet torque converters are designed for those who have heavily modified engines or for those who tow heavy weights. The showpiece of these converters is the RevMax patented torque converter stator sprag retainer (some models). This technology cannot be purchased anywhere else! Unlike most of the competition, RevMax has redesigned the lockup clutch piston to be able to accommodate a piston damper. The billet piston and damper allow the clutch to apply smoother—which in turn puts far less strain on the input shaft. RevMax Stage 5 converters have no horsepower or torque limitations. They're available for a variety of applications, including many Dodge, RAM, Chevrolet, and GMC trucks with Mopar or Allison transmissions from the 1990s and up. Additional details: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance triple disc lockup frictions * Billet lockup apply piston with performance spring damper * RevMax proprietary CNC-machined stator designs * RevMax patented sprag retainer (not on Allison models) * RevMax proprietary input shaft seal (not on Allison models) * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested
Not Yet Reviewed
$1,349.00
—
$1,649.00
$1,281.55
—
$1,566.55
On Sale
RevMax offers Stock Stall Stage 5 billet torque converters for a variety of Dodge, RAM, Chevrolet, and GMC trucks with Mopar, Allison, or Aisin-Seiki transmissions from the 1990s and up. They're designed for those who have heavily modified engines or for those who tow heavy weights. * Details for Mopar and Allison applications: The showpiece of these converters is the RevMax patented torque converter stator sprag retainer. This technology cannot be purchased anywhere else! Unlike most of the competition, RevMax has redesigned the lockup clutch piston to be able to accommodate a piston damper. The billet piston and damper allow the clutch to apply smoother—which in turn puts far less strain on the input shaft. RevMax Stage 5 converters have no horsepower or torque limitations. They're available for a variety of applications, including many Dodge and RAM trucks from the 1990s and up with Mopar transmissions. * Details for Aisin-Seiki applications: Aisin-Seiki converters are the culmination of over three years of R&D. Inside, RevMax has completely redesigned these converters, replacing the factory lockup piston with a billet-oversized version. In addition, the converters feature SIX lockup clutches and retain the factory damper assembly to provide extremely smooth converter apply. Product features: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance triple disc lockup frictions (Mopar and Allison) -- Raybestos or Alto, high performance SIX disc lockup clutch design (Aisin-Seiki) * Billet lockup apply piston with performance spring damper (Mopar and Allison) -- Billet apply piston (Aisin-Seiki) * RevMax proprietary CNC-machined stator designs * RevMax patented sprag retainer (not on Allison or Aisin-Seiki models) * RevMax proprietary input shaft seal (not on Allison or Aisin-Seiki models) * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested * TCRS computerized high-speed balancing to less than 5 gram * Runout tolerances of less than .005
Not Yet Reviewed
$1,349.00
—
$1,649.00
$1,281.55
—
$1,566.55
On Sale
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,199.95
—
$1,399.95
$1,078.95
—
$1,258.95
On Sale
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 6 )
$1,149.00
$1,034.10
On Sale
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
—
$1,499.95
$1,104.96
—
$1,274.96
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 162 )
$1,119.95
—
$1,599.95
$1,006.95
—
$1,438.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
