Availability
On Sale
Simpson Vortex II off-road suspension seats provide high containment, while still allowing for easy entry and exit with their cutaway lower bolster design. They are designed to work with the factory slider without raising the seat height. The Vortex's traditional tube-style frame is mated to a laser-cut seat base which utilizes a variety of different modular mounting rails. Simpson Vortex II seats are designed to create more legroom, steering wheel clearance, and make getting in and out of the vehicle much easier. They feature Simpson's ABS pass-throughs, producing a super clean look and their PVC sub-belt loop which keeps your sub-belt off the floor and at your fingertips making getting strapped in a snap. Simpson Vortex II off-road suspension seats are constructed from updated marine-grade vinyl and multiple-density high-quality foams, and are available in black, as well as several color combinations. Order the color your prefer.
( 1 )
$1,199.95
$1,078.95
On Sale
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 43 )
$1,399.95
$1,258.95
On Sale
Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps
( 20 )
$1,499.95
—
$1,649.95
$1,348.95
—
$1,483.95
On Sale
Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$1,599.95
$1,438.95
On Sale
Pypes Street Pro exhaust systems are designed to boost your car's performance to the next level—you'll get more power, better mileage, and a rich, throaty tone that can't be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel mufflers. Don't let the looks of these mufflers fool you. Although at idle, you may cause passengers to reach for their seat belts—upon acceleration, a smooth, authoritative tone turns apprehension into a reassuring confidence. These great street/strip mufflers will maintain their rich sound qualities for life because there is no filler to burn off. They're recommended for stock to medium-modified vehicles where an aggressive sound is appreciated but not advertised. Pypes Street Pro exhaust systems include stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 200 )
$1,051.79
—
$1,412.79
$1,011.79
—
$1,372.79
On Sale
Quicksilver cylinder heads are ideal replacement components for many GM-style 4-cylinder and V8 engines in marine, circle track racing, RV, truck, and hard-to-find industrial applications. With exclusive Black-X valves, they are designed to be the most robust, durable, and toughest service cylinder heads available. Select the cylinders heads designed to fit your engine. Features and benefits: * Thicker castings * Improved combustion chamber for better burn characteristics * Premium springs and hardened seats on the intake and exhaust ports * Quicksilver exclusive Black-X valves -- Composite valves -- Stainless steel treated with a cobalt-chromium alloy and black plasma nitriding -- Contribute to a 42 percent reduction in valve wear compared to traditional stainless steel valves with hardened seats -- Longer engine life, especially in the presence of modern ethanol-blended fuels * Backed with a 1-year limited warranty
Not Yet Reviewed
$1,316.99
—
$1,637.99
$1,185.29
—
$1,474.19
On Sale
Simpson Hybrid S restraints are not only both FIA and SFI-approved for competition use with multi-point racing harnesses, these head and neck restraint systems have also been tested, and shown, to be compatible with standard 3-point safety belts as found in street vehicles. This allows driving instructors, auto manufacturing test engineers, and other vehicles with 3-point harnesses to have additional protection. Additional details include: * FIA and SFI-approved with 5-, 6-, and 7-point harness systems * FMVSS tested for use with 3-point OEM belt system * High-quality carbon fiber construction * Low-profile (no high back to hook on the bars on exit) * Multiple load paths to dissipate head loads * Buckle attachment in front (no bulky straps underneath) * Installation manual
( 7 )
$1,199.95
—
$1,219.95
$1,078.95
—
$1,096.95
On Sale
Edelbrock Victor DR-23 Degree Pro Port raw cylinder heads are ready for finishing by the professional cylinder head porter or engine builder. They have as-cast ports with enough metal thickness to allow for CNC porting to different sizes. The heads are available for a variety of Chevrolet engine applications.
Not Yet Reviewed
$1,821.50
$1,457.20
On Sale
AFR offers 195cc Street Hawk CNC Gen 3 Hemi cylinder heads for a variety of Jeep, Chrysler, Ram, and Dodge vehicles from 2003 and up. The heads are manufactured from A356 aluminum using permanent-mold technology for better port, chamber and quality finishes. They feature street performance CNC-ported intake runners, exhaust ports and combustion chambers. These cylinder heads are outfitted with AFR's trademarked .750 in. thick head deck to meet the boost and power demands of today's OEM and aftermarket engines. AFR has improved the water jacketing for enhanced cooling while retaining a minimum of .200 in. port to water jacket thickness. They're equipped for use with hydraulic roller camshafts up to .600 in. of lift. The heads are available separately for the left and right side, and are available bare or assembled.
Not Yet Reviewed
$1,395.00
—
$1,686.00
$1,191.30
—
$1,404.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
