Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Holley Terminator X Engine Management Systems
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 96 )
$1,499.95
Holley Terminator X MAX Engine Control Modules
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,229.95
Holley Sniper EFI HyperSpark Distributor Kits
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$1,024.95
Holley Sniper EFI 2300 Two-Barrel Fuel Injection Systems
Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning
( 56 )
$1,299.95
Holley 5.0L EFI Intake Manifolds
Holley 5.0L EFI intake manifolds may be emissions-legal, but don't let that fool you into thinking they're restrictive--they flow tons of unrestricted air! They feature a 2,000 to 6,500 rpm power band, external EGR-passage maximized port and runner sizes, and they retain the stock injector and water outlet locations. The lower manifold ports match up to Holley cylinder heads, so you can be assured of getting the perfect match in the perfect power setup.
( 5 )
$1,177.95
—
$1,299.95
Holley 351W Ford Hi-Ram EFI Intake Manifolds
Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.
( 5 )
$1,399.95
Holley Ford 7.3L Godzilla High-Mount Accessory Drive Base Kits
Holley's Ford 7.3L Godzilla high-mount accessory drive base kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$1,399.95
Holley Fox Body Fuel System Kits
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,075.95
Holley SBF Hi-Ram EFI Intake Manifolds
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,299.95
Holley Ford 351W Hi-Ram EFI Intake Manifold Bases
Holley Ford 351W Hi-Ram EFI intake manifold bases feature runner lengths and tapered cross sections designed to perform well for a wide range of engine combinations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race–bred styling will make bad intentions clear for drag race, muscle car, marine, off–road, sand rails, pulling trucks, track, street rod applications and more! Features include: * Cast aluminum construction * The 351W manifold is available to work with 95mm or 105mm GM LS throttle bodies * EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system * Plenum top gasket-type--3/32 in. round O-ring cord * Manifold is designed for a 9.5 in. deck height * Requires the use of Holley EFI dual sync distributor
Not Yet Reviewed
$1,024.95
On Sale
Holley SBF Hi-Ram EFI Intake Manifolds with Side-Mount Tops
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,299.95
—
$1,349.95
Holley EFI Ford Coyote Ti-VCT Control Modules
Get Ford Coyote twin independent variable cam timing (Ti-VCT) control from Holley EFI. Do you have a Coyote crate engine going in your dream car? Is your weekend road race warrior powered by a Coyote junkyard engine with locked cams? Unlock the full potential of your high-revving power plant with the Holley EFI plug-and-play Coyote Ti-VCT control module! Product features: * Compatible with HP or Dominator EFI * Ti-VCT cam control down to 400 rpm * User-programmable tables enable end user to fine-tune aftermarket Ti-VCT-compatible camshafts * Commanded timing matched within 1 degree * 4 built-in diagnostic LEDs make diagnostics easy in the event of a cam or crank sensor failure * Integrated stock cam position tables eliminate tuning guesswork; optimal drivability and power right out of the box * Main harnesses come terminated with Ford TPS and IAC connectors—making it easy to convert from a DBW throttle body to a manual throttle body, if desired * Installation of an external MAP sensor is required (Holley MAP sensors recommended for naturally-aspirated applications) * Main harnesses include a power tap connector as a convenient source for power and grounds when adding additional sensors or actuators * CANBus communication between Coyote Ti-VCT and Holley EFI ECU for high-speed data transfer and diagnostics * Pre-calibrated Ford sensor drop-downs in the Holley EFI software * Plug-and-play main harness for 2011-17 Coyote engines with stock camshafts using stock coils or Holley EFI Smart coils (Holley EFI systems main wiring harnesses)
Not Yet Reviewed
$1,399.95
On Sale
Holley Sniper EFI Fabricated Intakes
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$1,311.95
—
$1,449.95
