Availability
Showing In Stock Items. Show All 154 Items.
We matched up high performance clutch parts to form these Summit Racing™ clutch, flywheel, and mounting hardware Pro Packs. They're available for hundreds of Ford, GM, and Mopar applications from the 1950s and up. Convenient and economical, Summit Racing™ Pro Packs save you the legwork with the correct parts to complement each other. Pro Packs include: * RAM HDX series clutch kit * Billet steel flywheel * Hydraulic throwout bearing * Pressure plate bolts and flywheel bolts
( 4 )
$1,121.10
—
$1,147.10
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,299.95
$1,149.95
—
$1,399.95
With the largest selection of remanufactured torque converters in the world to fit any transmission, model, or vehicle application, all VEGE remanufactured torque converters are built with parts that are of equal quality or higher quality than OEM (Original Equipment Manufacturer) parts, including VEGE's heavy-duty remanufactured torque converters. You can expect the best with VEGE! Specializing in reliable, yet affordable, sealed torque converters, VEGE torque converters are among the most popular in the industry. Their unique process combines the skillful experience of bench craftsman with the industrial engineering production line. Choose the torque converter model suited to your application needs.
( 10 )
$1,188.99
RevMax billet high performance towing/HD valve bodies for a variety of applications, including many Dodge and Ram trucks from the early 2000s and up. The V2.0 is 1 in. thick, but this new version has precision cutouts that allow the use of a stock filter and pan. Unlike other designs, full depth worm tracks in crucial circuits are included. Other competing designs have only a .190 in. deep worm track in several critical circuits. One restricted circuit is the combined vent track, responsible for all venting operations and in particular the problematic SSV valve. The next restricted circuit is the torque converter clutch signal circuit. Restrictions in this circuit create all kinds of torque converter related concerns, including dragging when coming to a stop, overheating, soft or harsh TCC apply or release, and back feed issues resulting in P1776 and P0871 trouble codes. Both the original and V2.0 have nearly full depth worm tracks in these areas which eliminate problem issues! The V2.0 plate will work with ANY aftermarket transmission pan, as well as with stock transmission pans. There is no need to alter any part of the pan or use special filters. Just install it like you would a stock channel plate and go. Order the model recommended for your year/make and transmission application. The RevMax 68RFE V2.0 ZeroFlex billet valve body features the following: * 6061 billet aluminum construction * Deep critical worm tracks * .0003 flatness across the entire plate. The only truly flat billet channel plate! * Micro-polished worm track surface. There are no visible or perceptible machining marks or stepovers. This ensures no chance of any leaking due to machining marks * Large radius machining on the filter cutout increases rigidity yet allows the use of a stock filter assembly * Angle milled step downs increase rigidity in problematic flexing areas * Ability to run up to 325 psi of line pressure without any warpage! (transmission tuning, TCM upgrade or pressure box is needed) * No pump modifications required for up to 250 psi * Proprietary worm track layout * Shortened shift times for crisp, clean shifts * Upgraded valve body to case seals * Billet steel SSV solenoid switch valve and end plugs * Revmax triple double 3/2 billet accumulator pistons with dual seals * Upgraded grade 8 custom fasteners * Upgraded steel accumulator housing plate that is 3x thicker than stock * RevMax proprietary accumulator springs for improved 3-4 shift feel * RevMax proprietary separator plate with the bonded gasket that eliminates cross leaks and warpage issues * Revmax proprietary upgrades * Mounting surface verified and flat filed * Threads checked and repaired if needed * Computerized testing on state-of-the-art $125k valve body test machines
( 3 )
$1,399.00
Reid Powerglide transmission cases are perfect for drag race high-horsepower applications. They are made by a permanent mold process from heat-treated aircraft-grade aluminum, making them stronger and more ductile than OEM castings. Features include: * Thickened oil pan flanges * Beefed-up oil pump area * Heli-coiled oil pump mounting holes * Adjustable trans-brake release * Redesigned oil passages * Reverse piston bleed hole * SFI-approved safety liners for flexplate and transmission
( 8 )
$1,229.00
—
$1,459.00
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,350.00
—
$1,550.00
Summit Bucks
Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.
( 12 )
$1,393.99
—
$1,607.99
Skip the clunky old mechanical linkage and install American Powertrain Hydramax hydraulic clutch release systems. They easily install in almost any rear-drive vehicle. The patent-pending adjustable master cylinder bracket allows you to mimic any original clutch rod angle, giving you a smooth, modern clutch feel without hacking up your firewall. The systems are designed to work with original and aftermarket pedals and are available for most vintage 4-speeds, along with TREMEC T5, TKO, Richmond, T56, and Magnum 6-speed transmissions. These systems come with the nickel plated firewall mount, volume-matched master cylinder, as well as a reservoir kit, lines, fittings, model-specific pedal mounting hardware, and model specific internal or external slave cylinder.
( 81 )
$1,030.00
—
$1,195.95
On Sale
Beef up your rear-end with Trail-Gear Rock Assault rear axle housings. Better trail performance comes in the shape of fabricated, thick steel center sections and differential mounting surfaces, heavy-duty DOM axle tubes, and 4130 chromoly flanges. Plus, Trail-Gear engages the tubes further into the center section, with a 360 degree gusset welded around the tubes on the inside of the housing, to ensure that your rig is strong enough to go wherever you want! Rock Assault's overall design also offers additional clearance under the axle tubing and differential, providing more height to climb over those big boulders. Outfit your rig to be extremely tough with the rugged, high-clearance design of Trail-Gear Rock Assault rear axle housings.
( 1 )
$1,199.99
—
$1,499.99
$1,019.99
—
$1,274.99
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
—
$1,580.00
On Sale
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
—
$1,499.99
$1,019.99
—
$1,274.99
On Sale
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
$1,274.99
The downsizing of modern passenger car engines enables reduced fuel consumption and CO2 emissions, but can also increase rotational irregularities and natural vibrations. Torsional vibrations transmitted to other components in the drivetrain diminishes comfort and may even lead to component damage, therefore effective vibration damping is essential. LuK dual mass flywheels (DMF) reliably dampen torsional vibrations in the powertrain and ensure high gearshift and driving comfort in all speed ranges. Unlike a conventional flywheel, DMFs consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated to almost completely absorb the torsional vibrations of the engine. Precisely matched to the respective vehicle, each LuK DMF enables low-speed driving and ensures lower fuel consumption, as well as reduced emissions. Order the proper size for your vehicle.
( 12 )
$1,013.99
—
$1,209.99
On Sale
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$1,499.99
—
$1,599.99
$1,289.99
—
$1,375.99
On Sale
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
$1,274.99
If you have limited space or height restrictions and need the holding capacity of a dual disc clutch, the RAM Concept 9.5 is built just for you! The RAM Concept 9.5 dual-disc metallic clutch kits meet the need for a smaller diameter or more compact, shorter design to fit in applications with limited bellhousing space. Building on the highly successful Concept 10.5 and Force 9.5 complete dual-disc systems, Concept 9.5 kits incorporate a billet stand design that allows the use of any RAM or other flat flywheel to facilitate installation. RAM Concept 9.5 dual-disc clutch kits feature: * 900 Series metallic friction material for applications up to about 850 hp * A higher clamp load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Concept 9.5 units are ideal for applications, such as road race or autocross vehicles
Not Yet Reviewed
$1,279.00
FTI Performance Diesel Extreme Series torque converters deliver the strength and reliability you need. With a billet aluminum lockup piston and front cover, CNC-ported stators, and heavy-duty sprag modifications, these units are ready to rock. They provide more torque multiplication, lower transmission temperatures, improved acceleration, and better fuel mileage. Their triple disks add excellent reliability, while six pads add strength to the 6-bolt mounting system. Whether you're towing, cruising, or racing, trust the strength of FTI Performance Diesel Extreme Series torque converters. Order the model recommended for your transmission application.
Not Yet Reviewed
$1,395.00
Summit Racing's Pro LS transmission adapters enable you to swap to more common and inexpensive manual transmissions from other vehicles. In addition to the bellhousing adapter, they often include handy items like the billet steel flywheel, fasteners, pilot adapter, and starter mounts. These adapters allow the use of the high performance clutches commonly used with the transmission. The kits are available for 5-speed or 6-speed applications.
( 1 )
$1,227.99
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$1,550.00
On Sale
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
$1,274.99
Diesel trucks are designed for towing heavy loads. If your rig is running 500 to 650 hp, then Valair Performance Quiet Street Dual Disc clutch kits are the way to tow. They feature tough heavy-duty parts, strong pressure plates, and a nodular iron flywheel. These kits are not intended for racing or competition use. Quiet clutch kits eliminate floater plate rattle when the clutch is pressed in, but gear rollover noise is inevitable when changing to a solid mass flywheel. It's often heard when the vehicle is under load at low rpm or idling, and it sounds like marbles in the transmission. Please educate yourself before purchase. Towing is tough on your vehicle—keep the pressure high and the shifts solid with a Valair Performance Quiet Street Dual Disc clutch kit, available for a variety of specific transmission applications.
( 9 )
$1,631.58
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 101 )
$1,391.48
—
$1,421.66
South Bend Clutch Dyna Max street dual disc clutch kits are offered for a range of applications and setups. These clutch kits are made using high performance materials and include everything you need for your clutch installation. Many kits include Kevlar® pilot bushings. When it comes to street performance, you can count on South Bend for top-quality components.
( 79 )
$1,391.48
—
$1,769.82
FTI Performance SRL Series billet lockup torque converters feature a computer-designed, CNC-machined billet front cover and a billet lockup piston--making premature clutch wear a thing of the past. With custom stator designs and multiple blade angle pumps, stalls are available from 2,800-4,400 rpm. They are custom-built to your exact needs and driving style. With furnace-brazed and heli-welded fins, severe-duty sprague, and anti-ballooning flanged impeller hub, these torque converters are virtually indestructible.
( 16 )
$1,099.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
