Ignitions & Electrical - Kits KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Altronics Red Alert Complete Systems

Keep accurate data of those EGT temperatures with Altronics Red Alert complete systems. They're the first data recording units specifically designed to note the engine cylinder exhaust temperatures (EGT). They can document up to eight EGTs and engine rpm throughout the run. These systems include 8 EGT probes, junction box, interface cables, and downloading kit with software.

Not Yet Reviewed

$1,099.99

—

$1,189.99

Haltech Rebel LS Gen 3 and 4 ECU Kits

Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.

5.0 out of 5 stars ( 4 )

$1,495.00

On Sale

MSD Chevy Crate Engine Ignition Kits

These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!

4.78 out of 5 stars ( 18 )

$1,024.95

AiM Sports MXP Data Loggers

AiM Sports MXP data loggers represents a huge leap forward in racing display flexibility and expandability—at the highest level—giving you the required tools for winning performance. The MXP offers more display area than the MXS 5 in. display, in a similar dimension. The dash loggers are provided with lights for integrated gear change indication and alarms in multiple colors that are totally configurable with drag and drop. They are equipped with Wi-Fi, USB connectivity, a 4m GPS module, and a 9-axis inertial platform. When you need to know, AiM Sports MXP data loggers are the instrumentation you need to use! Features and specs include: * High-contrast 6 in. TFT display * Anodized aluminum body; metallic push buttons * Resolution: 800 x 480 pixels * Contrast: 600:1 * Brightness: 700cd/m2--1,100 Lumen * Ambient light sensor: Yes * Fully user configurable * 5 configurable RGB alarm LEDs * 10 configurable RGB LED shift light array * ECU connections: CAN, RS232 or K-Line * ECU compatibility: 1,000+ industry leading ECUs * Expansion CAN connection: 4.00 m GPS module, channel expansion, TC hub, Lambda controller, SmartyCam HD * Analog inputs: 8 fully configurable, max 1,000 Hz each * Digital inputs: 4 speed inputs, lap signal, coil rpm input * Digital outputs: 2 (1 A max each) * Second CAN: Yes * Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer * Internal memory: 4 GB * Connectors: 2 Motorsport connectors and 1 binder connector * Power consumption: 400 mA * IP65 waterproof * Real-time fully configurable math channels What comes in the box: * MXP * GPS module with cable * USB cable * 37 pins standard harness * Race Studio 3 software

Not Yet Reviewed

$1,499.00

American Autowire Classic Update Series Wiring Harness Kits

American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location

4.69 out of 5 stars ( 567 )

$1,015.55

—

$1,471.55

On Sale

MSD Ford Crate Engine Ignition Kits

A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.

4.4 out of 5 stars ( 10 )

$1,299.95

On Sale

AEM Electronics CD-7 Digital Racing Dash Displays

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.

3.0 out of 5 stars ( 2 )

$1,649.95

$1,483.95

Jesel Extreme Series Distributor Drive Kits with ICT

Jesel Extreme Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and the ability to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Extreme Series distributor drives also feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications.

5.0 out of 5 stars ( 1 )

$1,140.00

On Sale

Racepak V-Net EGT Sensor Kits

Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)

Not Yet Reviewed

$1,024.95

Jesel Pro Series Distributor Drive Kits with ICT

Jesel Pro Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and are ideal for naturally aspirated engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Pro Series distributor drives also feature Gates PowerGrip HTD belts and use Moroso Ultra Series distributor components. The balanced brass rotor tip and form-staked carbon ball on the coil lug have been designed to eliminate grounding paths and crossfiring.

Not Yet Reviewed

$1,090.00

Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits

Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.

Not Yet Reviewed

$1,364.95

—

$1,377.95

Manufacturer Rebate

Dedenbear Throttle Stop Disc Kits

Dedenbear throttle stop disc kits are just what you need to hit that index every time. They are designed for high-mph cars and have no flow restriction for maximum horsepower. They feature needle bearings for precision opening, a centered opening for repeatability, and internal parts made of stainless steel to resist corrosion. The discs are 1.5 in. thick, and will allow you to adjust the opening and closing rates separately. The kits include a solenoid valve, air lines, and fittings for easy installation.

Not Yet Reviewed

$1,326.99

Edelbrock Pro-Flo 4 EFI Standalone ECU and Harness Kits

Edelbrock Pro-Flo 4 EFI standalone ECU and harness kits provide an economical, EFI solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. These kits can be used with any application for which Edelbrock offers a Pro-Flo 4 distributor. Each standalone kit includes ECU, supporting sensors, a wideband O2 sensor, and wiring harness. The ECU controls both fuel and spark, and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones, and the software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must purchase a Pro-Flo distributor (specific to the application) and provide an induction system, including EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, fuel pump, regulator, and fuel lines.

Not Yet Reviewed

$1,126.95

Kleinn The Beast Bolt-On Air Horn Kits

Make it louder with The Beast bolt-on air horn kits by Kleinn! They feature a triple-threat of tuned, high-impact black ABS train horns on a flat rack mount, which means they require up to 40 percent less clearance than other full-size horns. The trumpets can be separated from the rack for easier installation and they are always ready to blast thanks to a full onboard air system with a 100 percent duty cycle air compressor and three-gallon steel air tank. They also feature a tire inflation kit with a storage bag that allows you to power your horns and other accessories, like air bags and small tools. Basic hand tools are all you will need to install your own 100 percent bolt-on "Beast" air horn kit with model-specific brackets for the tank, compressor, and trumpets. Order the Kleinn air horn kit designed for your application. More product features, items, and specifications include: * High-output, 100 percent duty cycle, waterproof air compressor (6530RC or 6450RC -application dependent) * Air tank (3-gallon) * Model 230 Beast black triple train horn produces a thundering 153.3 decibels * Tire inflator with couplers and storage bag (not for use with aftermarket power side steps) * Vehicle-specific, powdercoated mounting brackets * All necessary components needed for installation * Upgradeable for louder blasts with BlastMaster air valve kit for a blistering decibel level * Illustrated step-by-step instructions

Not Yet Reviewed

$1,139.95

—

$1,299.95

On Sale

DiabloSport Trinity 2 Platinum/Modified PCM Performance Kits

DiabloSport Trinity 2 Platinum/modified PCM performance kits are designed for those who want the best of both worlds: pre-loaded, high performance tunes and custom tuning capability. They feature the Trinity 2 high-resolution, 5-inch capacitive touch screen with full swipe functionality, industry-leading gauge designs, jaw dropping power potential, and a powerful, yet simple, user interface. These performance kits also include an easy-to-install unlocked PCM to accept the tune and keep your stock PCM safe and unaltered. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows enthusiasts like to bolt-on upgrades and extract every bit of horsepower out of their vehicles. That's where CMR custom tuning comes in. DiabloSport's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport Trinity 2 Platinum/modified PCM performance kit best suited for your ride!

5.0 out of 5 stars ( 1 )

$1,499.95

Kleinn ProBlaster Standard Triple Train Horn Kits

Kleinn ProBlaster standard triple train horn kits include three chrome plated spun copper horns and a BlastMaster valve upgrade kit that make them louder than a locomotive's horn! Their flat rack design and detachable trumpets allow for numerous installation options, while the air compressor and air tank make sure they are always ready to blast. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order the Kleinn ProBlaster standard triple train horn kits. More product features, items, and specifications include: * Horn sizes – 17.5 in., 15.5 in. and 11.5 in. long (18.25 in. x 18.00 in. x 7.00 in. assembled) * Air compressor – 150 psi (9.25 in. x 4.00 in. x 6.50 in.) * Air tank – 3.0 gallon (21.0 in. x 7.0 in. x 10.0 in.) * Output – 151.8 dB at 100 psi * Output – 157.3 dB at 150 psi * Rating for cfm at 0 psi – 1.48 * Amp draw – 18 * Thermal protection * Pressure switch settings - 120/150 psi (on/off) * Quick-connect tire inflation kit with storage case * All parts needed for installation * Illustrated step-by-step instructions

Not Yet Reviewed

$1,049.95

Kleinn The Demon Bolt-On Air Horn Kits

Kleinn offers their Demon train air horn kits that include several massive, detachable black spun steel trumpets (730 Series) in three different sizes for that authentic locomotive blast sound! These packages are designed to power your horns and other accessories, like air bags and small tools, with the included high output, 100 percent duty cycle air compressor, air tank, and tire inflation kit. Want it louder? You can upgrade by adding their 6890 Ultra BlastMaster valve (sold separately), which will make the trumpet horns the loudest, largest, and most aggressive train horns you have ever heard. They will definitely hear you coming when you order The Demon bolt-on air horn kit best suited for your application. More product features, items, and specifications include: * Compressor model 6450RC * Demon 730 Series black triple train horns capable of 157.8 decibels * Air tank (3-gallon; 6350RT or 6351RT depending on application) * Black powdercoated mounting brackets * Remote mount tire inflator system (INF-1) * All necessary installation components * Illustrated step-by-step instructions

Not Yet Reviewed

$1,299.95

—

$1,429.95

On Sale

DiabloSport Pulsar Module/Trinity 2 MX Performance Monitor Kits

DiabloSport Pulsar module/Trinity 2 MX performance monitor kits offer the ultimate combination of on-the-fly adjustable performance and digital monitoring, Installing in minutes, the Pulsar modules are in-line computers that connect directly to your vehicle's PCM, eliminating unnecessary wires in the engine compartment. By connecting directly to the PCM, Pulsar can control signals to optimize performance gains, throttle response, MDS controls, mileage, and more. Even better, the Pulsar offers several performance levels that are changed by using your vehicle's cruise control +/- buttons on the steering wheel. Power levels are displayed on the dash. The Trinity 2 MX is an eye-catching, 5 in. full color capacitive touch screen that gives you the sharp, crisp graphics and limitless monitoring, so you can keep a close eye on your vehicle's vitals. They feature an auto-dimming screen and a customizable background display. Take full control of your vehicle with DiabloSport Trinity 2 MX/Pulsar kits. Choose the kit designed for your vehicle.

Not Yet Reviewed

$1,549.95

$1,393.95

Altronics Powerlite Lithium Battery Kits

Altronics Powerlite lithium battery kits include a Powerlite lithium battery and a battery charger that's specially designed for these Altronics batteries. Powerlite lithiums are the latest technology in extremely lightweight high-power batteries. Give your vehicle that necessary juice to perform at its optimum best. Order the voltage and amp options needed for your application. Altronics Powerlite lithium battery benefits over lead acid-type models: * Longer life expectancy * Much more stable voltage and current output over lead acid * Charges faster than other battery types * A "Green" product; environmentally safe * RoHs and UN DOT safety-approved

Not Yet Reviewed

$1,199.99

MechMan Dual Bracket Kits

MechMan Alternators offers dual bracket kits for a wide range of applications, from the 1990s and up. Unless otherwise noted, these kits include two alternators, as well as brackets, regulators, pulleys and serpentine belts. Order the model recommended for your vehicle.

5.0 out of 5 stars ( 1 )

$1,199.00

Kleinn ProBlaster Ultimate Triple Train Horn Kits

ProBlaster Ultimate triple train horns are Kleinn's biggest train horn kit! The massive spun steel trumpets measure 18.25 in., 14.75 in., and 10.5 in., and feature a stealthy black finish. They're detachable, allowing many options for installation. You want loud, large, and aggressive? Place your order! Package includes: * The Demon™ triple train horn * VX6003 high performance air valve * 150 psi 100 percent duty air compressor * 5-gallon air tank * Pressure switch and brass air fittings * 12 ft. high-pressure nylon air tubing and horn button * 35 ft. tire inflation coil hose * Wiring and installation kit

Not Yet Reviewed

$1,179.95

On Sale

Holley Terminator X Engine Management Systems

Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)

4.48 out of 5 stars ( 96 )

$1,399.95

—

$1,549.95

$1,258.95

—

$1,393.95

Haltech iC-7 Color Display Dash

Haltech offers a variety of data acquisition components, including the iC-7 Color Display Dash. With a crisp, clear and full color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: All current Haltech ECUs via CAN. Also Plug-and-Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series (M400,600,800 gold box ECUs), Syvecs. * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (including spare pins for input wiring), DTM-4 to DTM-4 CAN extension cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag * Notes: OBD-II and Stand-alone versions also available.

Not Yet Reviewed

$1,099.00

Painless Performance 26-Circuit 1969 Direct-Fit Camaro Harnesses

Painless Performance 26-circuit 1969 direct-fit Camaro harnesses are complete for a trouble-free, headache-free install. True to their name, Painless delivers these kits with virtually every connector installed on the harness out of the box. They cover all common options, plus a fully integrated ground circuit. Included are provisions for the RS headlights and taillights, cowl hood, and even a complete console harness! The 26-circuit 1969 Camaro harnesses include: * Numerous components with the connectors and terminals pre-installed to make connections plug-n-play * Exterior lights with the correct sockets and bulbs pre-installed * 6-gauge charge wire and 150 amp MIDI fuse * 120+ page manual full of color schematics, photos, and step-by-step instructions

4.18 out of 5 stars ( 11 )

$1,069.99

64 Results Found For "Kits"