Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
8 Results Found For "ratio"
Showing In Stock Items. Show All 10 Items.
DIYAutoTune MegaSquirt MS3Pro Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,499.99
Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits
Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.
Not Yet Reviewed
$1,364.95
—
$1,377.95
On Sale
Edge Pulsar LT Module with Insight CTS3 Programmers
The Edge Pulsar LT with Insight CTS3 Programmer is a new inline module for various Chevrolet and GMC applications—offering complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT offers you the ability to adjust throttle response, tire size, gear ratio, TPMS, and your top speed limiter. (Pulsar LT for Duramax applications can also be used to command a manual DPF regen cycle, automatic transmission relearn, clear DTC's and high idle the engine.) It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Stepping it up one notch, this kit also includes the industry-leading Insight CTS3 monitor for all the live data you could ever ask for. The Insight is the most preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. It's the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. CTS3 is an instantaneous and inexpensive alternative to bulky, analog gauges that would otherwise cost hundreds of dollars and take hours to install. This is the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle. It can also be intelligently configured to provide audible and visual alerts to help you protect your vehicle. A vehicle-specific A-pillar display mount is also included for a sleek, more permanent way to mount the CTS3 in the cab of your truck. These mounts offer an OE look, while keeping the monitor within easy reach without obstructing your view of the road. Order the model recommended for your vehicle and engine application. Product features: * Calibrate Tire Size (29 in. - 50.9 in.) * Adjust Throttle Response * Modify Gear Ratio (2.00 - 6.99) * Change Top Speed Limiter (98 - 140 mph) * Clear Diagnostic Trouble Codes * Transmission Relearn * Manual Regen * Reprogram TPMS Threshold (40 - 99 psi) * Simple Installation Process * Does Not Modify ECM
Not Yet Reviewed
$1,126.95
$1,013.95
—
$1,299.95
On Sale
Edge EZX Modules With Insight CTS3
The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.
( 1 )
$1,399.95
$1,033.95
—
$1,349.95
Edelbrock Pro-Flo 4 EFI Standalone ECU and Harness Kits
Edelbrock Pro-Flo 4 EFI standalone ECU and harness kits provide an economical, EFI solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. These kits can be used with any application for which Edelbrock offers a Pro-Flo 4 distributor. Each standalone kit includes ECU, supporting sensors, a wideband O2 sensor, and wiring harness. The ECU controls both fuel and spark, and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones, and the software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must purchase a Pro-Flo distributor (specific to the application) and provide an induction system, including EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, fuel pump, regulator, and fuel lines.
Not Yet Reviewed
$1,126.95
Chevrolet Performance Automatic Transmission Controllers
These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet Performance automatic transmission controllers are fully programmable for upshift, downshift, part throttle and wide-open shifts, and shift firmness. They come preprogrammed--just enter your rear tire diameter and rear axle ratio and go, or create your own custom shift characteristics. Chevrolet Performance automatic transmission controllers were originally developed by GM Racing for off-road truck racing. They have the ability to record and graph drag racing data like time, speed, shift point, engine rpm, and more.
( 1 )
$1,244.59
On Sale
Edge Pulsar V3 Modules
The best just got better! Edge Pulsar V3 modules add 50 percent more power as compared to the original models. Pulsar V3 modules adjust four major components to build power safely: injection pulse width, injection timing, fuel rail pressure, and airflow. Plus, they offer improved shifting across the board. Edge Pulsar V3 modules bring together powerful tuning, safety features, ease of installation, and direct control over your driving experience to optimize performance and drivability in every setting. They also include adjustment features that allow you to account for any changes you've made to your truck. Calibrate your speedometer for tire and gear changes, read and clear diagnostic trouble codes, adjust your TPMS settings on your new wheel/tire setup, or even adjust your speed limiter. After installing the Pulsar module, the only thing you'll wonder is why you didn't equip your rig with it sooner. Features: * Up To 136 hp and 293 torque to the wheels (some trucks netted over 150 hp) * Speed limiter adjustment * TPMS adjustment * Tire size adjustment * Axle ratio adjustment * Clear DTCs * Manual regeneration * Transmission re-learn * Five on-the-fly adjustable levels * Use steering wheel controls to adjust levels and features
Not Yet Reviewed
$1,126.95
$1,013.95
On Sale
Edge Insight CTS3 Monitors with Pulsar Modules
Edge Insight CTS3 monitors with Pulsar modules offer the best performance combo for late model Hemi trucks. The in-line Pulsar connects directly to the vehicle PCM, eliminating unnecessary wires in the engine compartment, and by doing so, Edge can control the vehicles signals to optimize performance gains, throttle response, MDS controls, mileage, and more. Additional Pulsar + Insight CTS3 kits feature: * Industry-leading 5 in. touch screen monitor * Pulsar offers eight performance levels * Adjust power levels on-the-fly through steering wheel controls or through Insight CTS3 * Power levels are displayed on the dash, as well as on the monitor * Add up to 30 hp on Hemi and Jeep * Improves economy, towing capabilities, throttle response, and performance * Tire size adjustment * Gear ratio adjustment * TPMS adjustment on Jeep * Turn off MDS on Ram Hemi * Auto start/stop disable on Jeep * No modifications to vehicles PCM leaving virtually no traces for warranty * Read/clear DTCs * Performance tests, including 0-60, 1/8th mile, 1/4 mile * Connects directly to the vehicle computer for a clean install, no wires * Multiple gauge layout and color options to customize your CTS3 look
Not Yet Reviewed
$1,299.95
$1,168.95
