Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
10 Results Found For "built"
Showing In Stock Items. Show All 17 Items.
Not Showing Customizable Items. View Customizable Items.
Holley Terminator X MAX Engine Control Modules
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,229.95
On Sale
FuelTech FT550 EFI System
FuelTech FT550 EFI systems were developed and created to put you in control! The FT550 ECU is an engine fuel control and monitoring system: electronic fuel injection, integrated dashboard, data acquisition, and power management system all-in-one! It uses the same FTManager software as the FT600, with the same features and functionalities--including the newest update that allows the user to update their fuel map by applying the oxygen closed loop corrections that took place from a log file. Map files of all the PowerFT ECUs are compatible with each other, meaning that you can upgrade ECUs and keep the same tune you had already. The dashboard design of the FT550 ECU systems feature an engine start button, new inclinometer gauges; and virtual LEDs for arrows, headlights and other functions. The touch screen allows editing the maps directly on the module (without the need for computer use) and seamless integration between the ECU and vehicle dashboard. More key features and benefits: * Sturdy, waterproof plastic case automotive connectors with 52 pins, USB communication and two CAN Bus ports, 14 inputs and 24 outputs that are fully configurable * Best ECU for projects that require more features, including GearController (power-shifts), built-in accelerometer (G-meter) and gyroscope; in addition to all PowerFT ECU line features such as sequential injection and ignition, O2 closed loop, active traction control, integrated BoostController, internal datalogger, progressive and PRO-Nitrous controls, odometers, electronic throttle control, inclinometer, drag racing features and more
Not Yet Reviewed
$1,899.00
$1,399.00
Edge EZ Modules with Insight CTS3
Edge EZ modules with Insight CTS3 provide plug-in power that is almost like having a full-time pit crew on the dash! Want more pull, better throttle response, and real-time visibility without turning your truck into a science project? These modules combine plug-and-play performance with a 5 in. touchscreen monitor so you can add power and keep tabs on the vitals at the same time. They are designed to install using factory-style connections with no cutting/splicing and no complicated tuning, and capable of returning the vehicle to stock status when removed with no ECM flash footprint. The full-color touchscreen plugs into the OBD-II port with no wiring required, displays dozens of parameters, and lets you swipe between screens. You can use the built-in performance testing (0-60, 1/4-mile), do Wi-Fi updating, data logging, and get alerts to help protect your ride when temperatures or pressures climb. Whether you are towing, commuting, or playing, Edge EZ Modules with Insight CTS3 help you dial it in and keep it in check. More product features and notes include: * Most EZ applications offer multiple power levels you can adjust on-the-fly through the Edge smartphone app, plus an adjustable throttle booster so you can tailor pedal feel for towing, commuting, or weekend fun * Diesel-friendly monitoring features like manual DPF regen and live data monitoring on supported applications * Power gains, power levels, included mounts, and emissions legality vary by application; check the specific part number for details and any CARB EO/compliance notes
Not Yet Reviewed
$1,013.95
DIYAutoTune MegaSquirt MS3Pro Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,499.99
Holley EFI Ford Coyote Ti-VCT Control Modules
Get Ford Coyote twin independent variable cam timing (Ti-VCT) control from Holley EFI. Do you have a Coyote crate engine going in your dream car? Is your weekend road race warrior powered by a Coyote junkyard engine with locked cams? Unlock the full potential of your high-revving power plant with the Holley EFI plug-and-play Coyote Ti-VCT control module! Product features: * Compatible with HP or Dominator EFI * Ti-VCT cam control down to 400 rpm * User-programmable tables enable end user to fine-tune aftermarket Ti-VCT-compatible camshafts * Commanded timing matched within 1 degree * 4 built-in diagnostic LEDs make diagnostics easy in the event of a cam or crank sensor failure * Integrated stock cam position tables eliminate tuning guesswork; optimal drivability and power right out of the box * Main harnesses come terminated with Ford TPS and IAC connectors—making it easy to convert from a DBW throttle body to a manual throttle body, if desired * Installation of an external MAP sensor is required (Holley MAP sensors recommended for naturally-aspirated applications) * Main harnesses include a power tap connector as a convenient source for power and grounds when adding additional sensors or actuators * CANBus communication between Coyote Ti-VCT and Holley EFI ECU for high-speed data transfer and diagnostics * Pre-calibrated Ford sensor drop-downs in the Holley EFI software * Plug-and-play main harness for 2011-17 Coyote engines with stock camshafts using stock coils or Holley EFI Smart coils (Holley EFI systems main wiring harnesses)
Not Yet Reviewed
$1,399.95
On Sale
Edge Juice Modules with Attitude CTS3 Programmers
Edge Products' Juice modules with Attitude CTS3 programmers are the ultimate tuner for the average diesel owner and horsepower junkies too! Featuring state-of-the-art CTS3 technology, the Juice with Attitude offers a whole new realm of features to continue pushing the limits of on-the-fly power, control, and monitoring. This in-cabin controller not only monitors vital vehicle parameters but allows you to shift-on-the-fly by controlling the Juice module for maximum control and power gains. If you own a diesel truck and you're looking for complete control over your driving experience, look no further than Juice with Attitude CTS3 programmers. Additional product attributes: * Slim, sleek case with state-of-the-art swipe technology * 5 in. full color, high-resolution touchscreen with the latest swipe technology (with one-touch easy menu navigation) * Light sensitivity meter to dim screen as ambient light decreases * HDMI style plug for power and linking EAS accessories * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge layouts, including on-the-fly power level adjustment on screen * Wi-Fi updates and notification center * Multiple power levels for mileage, towing, daily driving, performance, and extreme power curves * Additional Hot Unlock available for some applications for an additional power level * Up to 180 hp and 400 torque gains, depending on application * Dynamic built-in safety features like EGT backdown, cold engine protection, transmission slip backdown and more Note: Some features may vary by make/model/year. Configure your vehicle to search for parts and features specifically for your application.
Not Yet Reviewed
$1,349.95
—
$1,599.95
$1,213.95
—
$1,438.95
On Sale
Edge Pulsar Insight CTS3 Programmers
The Edge Pulsar Insight CTS3 Programmers are an advanced monitor and tuning combo that eliminates the need for ECU swaps, fuel pressure boxes and other underperforming tuning products. With simple installation, huge performance gains and the crisp insight display, this Edge Products tuner and monitor combo is all you need for the street. The Pulsar allows you to change power levels on-the-fly, without having to shut-off the vehicle and the module delivers up to 90 hp and 156 TQ and has a transmission relearn feature for the increase in power. Along with the relearn feature, the module also has transmission slip backdown to decrease power when clutch slip is detected in the transmission and allows you to recalibrate the speedometer for wheel, tire and gear changes through the Insight CTS3. The Insight CTS3 portion of this tuner/monitor combo has a sleek housing with a full-color high-resolution capacitive touch screen with haptic response. The Insight CTS3 can display power level, while monitoring rpm, boost psi, mph, gear, ECT, EGT and much more. Built-in safety features such as EGT backdown, high-idle adjustment, cold engine protection, gear change backdown, injector balance rates and much more can be monitored by the Insight. Key features of Pulsar Insight CTS3 programmers: * Wi-Fi updateable * Built-in turbo timer * Adjustable high-idle setting * Five on-the-fly adjustable power levels * Speed limiter adjustments * TPMS pressure adjustments * Enhanced throttle response with built-in throttle sensitivity control * Updates for Pulsar are managed through the Insight instead of requiring a laptop computer
Not Yet Reviewed
$1,299.95
—
$1,449.95
$1,168.95
—
$1,303.95
On Sale
Edge Pulsar Duramax Modules
Edge Pulsar Duramax modules are innovative in-line tuners that have totally changed the game when it comes to adding performance and keeping the ECU on the truck. No mail-in unlocks, no cross-shipment, or hassle. Pulsar supplies instant power, on the fly, with no flash tuning. Now with carb compliant EO coverage for sale in all 50 states! Features: * EO Number D-802-9 * Change five power levels on-the-fly using +/- cruise control buttons * Connects directly to ECU in engine compartment providing instant power * Built-in throttle sensitivity control for improved throttle response * High-idle user settings to adjust rpm during idle * Transmission slip backdown power will decrease if slip is detected * EGT Backdown power will decrease if EGTs exceed set limit * Provides the ability to recalibrate the speedometer for wheel/tire changes * Simple installation with no complex wiring harness or ECU flashing required * Ships with update cable
( 1 )
$1,126.95
$1,013.95
On Sale
DiabloSport Trinity 2 Platinum/Modified PCM Performance Kits
DiabloSport Trinity 2 Platinum/modified PCM performance kits are designed for those who want the best of both worlds: pre-loaded, high performance tunes and custom tuning capability. They feature the Trinity 2 high-resolution, 5-inch capacitive touch screen with full swipe functionality, industry-leading gauge designs, jaw dropping power potential, and a powerful, yet simple, user interface. These performance kits also include an easy-to-install unlocked PCM to accept the tune and keep your stock PCM safe and unaltered. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows enthusiasts like to bolt-on upgrades and extract every bit of horsepower out of their vehicles. That's where CMR custom tuning comes in. DiabloSport's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport Trinity 2 Platinum/modified PCM performance kit best suited for your ride!
( 1 )
$1,499.95
$1,348.95
On Sale
DiabloSport Modified PCM and Trinity 2 EX Platinum Packages
DiabloSport Modified PCM and Trinity 2 EX Platinum packages are the most advanced performance programmer and monitoring setups available for a large range of applications. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Each of these performance kits include an unlocked PCM, so you can tune in no time and keep your stock PCM safe and unaltered. And even though DiabloSport T2 Platinum programmers are already equipped with some of the best tuning capabilities right out of the box, they know you want to bolt-on upgrades and extract every bit of horsepower possible from your vehicle. That's where CMR custom tuning comes in. DiabloSports's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Pre-loaded, high performance tunes, in addition to custom tuning capabilities; it's the best of both when you choose to unlock your vehicle's potential with DiabloSport Modified PCM and Trinity 2 EX Platinum packages.
( 1 )
$1,299.95
—
$1,499.95
$1,168.95
—
$1,348.95
