Availability
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$1,004.20
—
$1,513.50
On Sale
Hooker Super Competition sidemount headers and mufflers deliver the most aggressive style and performance for your early Corvette, Camaro, Nova, or Firebird. Sidemount headers are built from lightweight 18-gauge tubing. Sidetubes slip directly into the collector for a leak-free seal. They are available in your choice of three finishes: Show quality chrome, high heat-resistant black paint, and metallic ceramic coating. The replaceable mufflers are available separately in two different styles: glasspack and reverse flow. The glasspack style provides the highest performance with minimal backpressure and sound control, while the reverse flow is designed for maximum sound control. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 29 )
$1,129.95
—
$1,499.95
$1,015.95
—
$1,348.95
On Sale
BD Diesel Roadmaster CAT T6 exhaust manifolds are dependable 3-piece units constructed of thick walled, durable high-silicon ductile iron that will prevent cracking and help reduce future repair costs and down time. The manifolds have a Pulse exhaust flow design that directs energy to the dual volute turbine maximizing spooling response and bottom end power. The T6 mount allows for a variety of turbos to be installed including BD's own Roadmaster Turbo.
Not Yet Reviewed
$1,346.95
$1,212.26
So you're ready to swap in a super lightweight engine that will require no maintenance, yet cranks out unbelievable horsepower and torque—giving you a truck you can hop in, turn the key, and go! Now, Classic Performance offers engine install kits to upgrade and finish off your conversion with ease. These CPP kits will work on most all LS engines. Order the model recommended for your vehicle and engine application. Classic Performance engine install kits include: * Engine mount perches * Engine mount adapters * Engine pads * Full-length ceramic coated headers * Transmission crossmember * Mounting hardware
Not Yet Reviewed
$1,344.99
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 26 )
$1,006.85
—
$1,609.00
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$1,499.95
$1,003.95
—
$1,348.95
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 540 )
$1,013.99
—
$1,733.99
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 497 )
$1,004.20
—
$1,307.65
Ultimate Headers 321 Stainless Steel Headers integrate a cutting-edge, patented design, created specifically for maximum performance and minimal weight, with 3D-engineered flanges, and superior 321 stainless steel to deliver a unique combination of elegance and horsepower. Born in World War II for aircraft engine exhaust manifolds by adding titanium to basic nickel/chromium alloy steel, 321 stainless provides reduced weight, plus increased resistance to material fatigue and thermal cracking in high-heat environments. Finite Element Analysis (FEA) processes are used to create Ultimate Headers and the unique Ultimate Flanges with their signature, high-tech, ribbed reinforcements that reduce weight, improve flange cooling, and lessen heat-induced warpage; while providing the required clamping forces to eliminate leakage. Ultimate 321 Stainless Steel Headers' tight radius, investment-cast, 316L stainless steel elbows immediately turn the header tubes away from the exhaust ports with a radius smaller than the tube diameter (which can't be done using a tube bender); holding the header tubes close to the block—perfect for engine swaps. Investment casting also maintains the desired wall thickness and avoids the thinner sidewall created by tube bending at the point where exhaust gas temperature and volume are at their highest. These benefits, combined with the advanced Cometic MLS (multi-layer stainless steel) header gaskets included with each set of headers, give Ultimate Headers 321 Stainless Steel Headers the leading edge when it comes to adding a total performance-enhancing exhaust system. Features include: * Patented design * Includes premium corrosion and heat-resistant ARP 12-point, 300 grade stainless steel bolts and washers * Jig fixture, TIG-welded for precise quality control * Easy to install * Header tubes are mounted high and tight for a compact, space efficient package away from steering shafts and frame rails * Eye-catching flanges add dramatic improvement to the engine compartment * Available styles include rear-dump and block-hugger designs * Available in a variety of finishes, including mill, satin, mirror polish, ceramic coated silver, and ceramic coated black *Ultimate Headers Cast Header Flanges or Extreme Low-Profile Clamps (both sold separately) are recommended for the end of the collectors
( 5 )
$1,269.00
—
$1,469.00
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 228 )
$1,599.95
$1,039.95
—
$1,499.95
Direct-fit BBK full-length headers will help your vehicle produce extra horsepower. Constructed from heavy 14-gauge, mandrel-bent tubing with 3/8 in. thick die-stamped flanges, these headers come in your choice of coated finishes. Gaskets and mounting hardware are included. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 107 )
$1,049.99
—
$1,649.99
On Sale
Summit Racing™ LS Turbocharger Manifold and Crossover kits provide premium components and accessories, carefully matched, to successfully reach your power and performance target. These kits use either Hooker or Summit Turbo manifolds and crossovers to allow you to mount a T-4 turbine sized turbo on your LS based engine. The kits include premium manifolds, gaskets, and hardware. Check out Kit/Combo contents tab for the components list.
Not Yet Reviewed
$1,144.88
—
$1,221.88
$1,031.88
—
$1,151.88
On Sale
Hooker Blackheart engine swap exhaust systems are designed to offer the best available ground clearance and fit, along with easy installation. They use factory mounting points for stock-like fitment and are designed for clearance with OE or aftermarket adjustable rear upper control arms. Order the Hooker Blackheart engine swap exhaust kit best suited for your engine swap application. Features: * Full 2.5 in. or 3 in. (depending on application) diameter system for maximum flow/horsepower potential * Constructed from lightweight, 18-gauge, mandrel-bent, 304 or 409 stainless steel (depending on application) for maximized strength and durability * Optimized bend geometry provides clearance for wide rear wheels/tires (in the factory wheel well) * Tube geometry designed for maximum clearance and hassle-free installation with all necessary installation hardware included * Manufacturer's limited lifetime warranty
Not Yet Reviewed
$1,349.95
—
$1,499.95
$1,213.95
—
$1,348.95
Hedman 304 stainless steel headers offer your exhaust system 100 percent mandrel-bent, 16-gauge tubes and hefty 3/8 in. flanges constructed from 100 percent 304 stainless steel for superior heat and fatigue resistance. They are available ceramic coated or raw. The HTC and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging. Unless otherwise noted, these 304s are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 39 )
$1,002.99
—
$1,411.99
Vance & Hines is going to change the way you look at 2-into-1 exhaust systems. Their Big Radius exhaust systems break the mold, delivering white-knuckle performance with a style that has won over the motorcycle aftermarket. Incorporating blue-proof technology across the entire length of the pipe, Big Radius exhaust systems will keep their showroom finish, whether at the drag strip or on the streets. Plus, these systems also include mounts for factory O2 sensors. Designed and produced in the USA, Vance & Hines Big Radius exhaust systems are as beautiful as they are functional.
Not Yet Reviewed
$1,099.99
—
$1,149.99
Look and sound as formidable as you can! With Vance & Hines Bigshot staggered exhaust systems, you can maintain the intimidating look of a 2-into-2 system, while achieving the performance advantages that come with a 2-into-1 race system. These apex-predators feature a proprietary power chamber design, which uses the volume of both mufflers to increase horsepower and torque. The Vance & Hines Bigshot staggered exhaust systems also feature an aggressive sound and offer removable baffles. Your mounting hardware and instructions are also included.
Not Yet Reviewed
$1,099.99
—
$1,149.99
Roush 2021-25 Ford F-150 5.0L cold air intake and exhaust system combos pair perfectly matched components in one performance package to upgrade your truck with awesome advantages. Roush Performance cat-back exhaust systems transform your truck with robust, corrosion-resistant T-304 stainless steel construction, high-flow mandrel bends to enhance exhaust flow efficiency, and a high-flow performance muffler engineered to deliver a race-inspired exhaust tone that will undoubtedly bring a smile to your face. This premium upgrade for your F-150 with increased airflow and less back pressure, helps to achieve your truck's full potential in horsepower and torque. The system is finished with 304 stainless steel tips featuring the Roush logo, and installation is easy, utilizing factory hanger locations and the necessary hardware included. Roush Performance cold air intakes bring great performance increases, achieved with an installation that takes under an hour and no calibration required. Newly designed, the CAI provides more efficient air intake than the stock airbox with much less restriction in forced induction applications, increasing engine performance with no PCM re-calibration required. Two important benefits of Roush CAI systems are latent potential in power and fuel efficiency that would otherwise be restricted, as well as reduced pressure drop. And since the systems are engineered and tested specifically for Ford F-150 applications, custom tuning is not a requirement. Experience the thrill of enhanced acoustics and performance provided with a Roush 2021-25 Ford F-150 5.0L cold air intake and exhaust system combo. Cold air intake highlights: * Increased inlet and airbox sizing -- allow for maximum airflow -- provides additional induction noise and aggressive performance sound * Designed using OEM CAD data -- guarantee optimized fitment, keeping heat out, and encouraging maximum performance * EPDM rubber couplers for proper fitment under engine load, rocking, and twisting * Utilizes factory mounting locations and hardware for quick, easy installation * High-flow, high-capacity dry filter with clamp -- proven to retain its shape -- composed of an inner and outer layer of wire mesh for durability and reliable support of filtration media -- requires no oiling and is easily washable for re-use * Oversized injection-molded air box tray * Clean air tube * 105mm mass airflow tube * Required mounting hardware and instructions
( 1 )
$1,299.99
Flaming River offers exhaust headers for a variety of applications. Manufactured from steel finished in a ceramic coating, the headers are available in full-length models—or a shorty design that allows extra ground clearance for dual exhaust systems. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Order the size, style, and other options recommended for fitment with your vehicle and engine application.
( 7 )
$1,192.99
Ford Performance Parts 2010-18 Taurus SHO Touring exhaust systems bolt directly to the stock factory catalytic converters, making your Taurus SHO 100 percent emission compliant, while providing an aggressive muscle car sound. These cat-back exhaust systems feature tuned stainless steel mufflers with 4 in. chrome plated stainless steel tips, so they not only sound great but look great too. Additional details: * Uniquely designed and tuned to provide optimum performance, aggressive sound, durability, and pure driving excitement * Meets 95 decibel drive-by noise standard for aftermarket exhaust systems, when installed on stock applications * Manufactured from high-quality 304 stainless steel * Features ultra-smooth mandrel bends, warp-free flanges, and superior craftsmanship * Bolts to stock catalytic converter * 2.25 in. stainless steel cat-back tubing * 4 in. chrome plated stainless steel tip * Uses stock hangers and mounts
( 1 )
$1,518.99
Pypes headers are manufactured from quality 304 stainless steel to ensure top-notch performance and long life. They come available for V6 and V8 applications. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 12 )
$1,456.79
—
$1,616.79
On Sale
Take control of your F-150's exhaust! With a durable high performance muffler, corrosion-resistant T-304 stainless steel and high-flow mandrel bends, Roush F-150 Active Exhaust kits use Roush Performance valve technology to control your exhaust note and make your F-150 stand out from the crowd. Product highlights for Roush F-150 Active Cat-Back Exhaust kit: * Fits the 2015-20 F-150 with 5.0L, 3.3L Ti-VCT, 3.5L EcoBoost (non-Raptor), or 2.7L Ecoboost engines * Does not fit short-cab configurations * Roush-designed high-flow muffler * More aggressive tone over stock * Made from durable corrosion-resistant high-grade 304 stainless steel * Full mandrel-bent piping for consistent flow * Dual 4 in. stainless steel tips etched with the Roush logo * Uses OEM hangers and mounting points * Requires no welding * Includes all necessary hardware * Roush limited lifetime warranty included * This product will NOT fit F-150s equipped with the high-output 3.5L EcoBoost engine
Not Yet Reviewed
$1,299.99
$1,169.99
On Sale
aFe Vulcan Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Vulcan Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation, with most applications requiring no modifications. Vulcan Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. They're constructed of 304 stainless steel and include black or polished 304 stainless steel tips with a laser-cut stainless steel aFe power badge. Order the model with size specs and other options recommended for your vehicle.
( 3 )
$1,128.75
—
$1,823.85
$1,015.88
—
$1,641.47
On Sale
Flowmaster Signature Series exhaust systems are manufactured from brushed 304 stainless steel for years of trouble-free service and high-end good looks. These premium systems are fitted with Flowmaster's Signature Series mufflers for maximum performance and sound, along with black chrome tips (not on all systems), delivering exhausts that look as good as they sound. They are hand TIG welded for exceptional strength and can be easily installed utilizing factory mounting points. Select the system designed for your vehicle.
( 1 )
$1,410.95
—
$1,489.95
$1,058.95
—
$1,339.95
Sikky Manufacturing LSX swap headers allow perfect drop-in fitment. Designed around using the Sikky mount kits and components, these headers are available for several applications in mild steel, ceramic coated mild steel, or with stainless steel primaries and collectors. (See product Notes and Applications for specific model fitment details.) Features include: * V-band flange pre-installed—clamp and other half included—(not all models) * Includes new gaskets and bolts * May have one oxygen sensor bung installed per header (not all models) Ceramic coating process includes: * Parts are thermal degreased at 750 degrees for 3 hours to remove any impurities and contaminates—the most effective way to clean parts * After thermal, they go through a series of blasting on all surfaces * Once a surface profile is created, they are hand-sprayed with aluminum ceramic coating * After parts are covered, they're put in the oven and cured at 750 degrees for 2 1/2 hours * When curing is complete, they are polished to a high luster in a vibratory polisher using special ceramic beads, along with special soap and water * After polishing, they receive a wipe down and inspection before going to shipping * 3-year warranty on coatings for corrosion
Not Yet Reviewed
$1,170.39
—
$1,383.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
