Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
42 Results Found For "end"
Showing In Stock Items. Show All 71 Items.
Hot Rods Complete Bottom End Rebuild Kits
When it's time to do a rebuild, Hot Rods complete bottom end rebuild kits are less expensive and longer lasting than OEM. These kits have all that you need to get back on track and are easy to put together. Each kit contains a crankshaft, main bearing/seals, and a complete gasket set. Water pump seals are not included. Great performance parts from Hot Rods will have you going, going, strong!
( 2 )
$1,014.01
—
$1,357.41
S&S Cycle 97 in. Big Bore Kits
S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required
Not Yet Reviewed
$1,249.95
Cylinder Works Standard Bore Cylinder Kits
Eliminate the wait with Cylinder Works standard bore cylinder kits. They arrive ready to install, eliminating the hassle of sending out your cylinder for re-plating or boring, and they're competitively priced compared to typical re-plating costs. These cylinders look virtually identical to your OEM parts. Cylinder Works standard bore cylinder kits come in model-specific kits, so choose the one that best fits your application. Features include: * Super-convenient--just purchase and install * Nickel silicon carbide plated for long life * Honed to exact size for easy piston installation * Complete with gaskets, cylinder, and piston kit * No machine work required
( 2 )
$1,036.10
—
$1,065.85
S&S Cycle 107 in. Big Bore Kits
S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance
Not Yet Reviewed
$1,305.95
S&S Cycle 98 in. Big Bore Kits
S&S Cycle 98 in. big bore kits are a fantastic upgrade if your Harley® is just a bit tired. The thicker and beefier cylinders mean that the engine will run cooler and you'll love the forged pistons that come with the kits. These are the largest bores that can be fit in your stock engine case. The cylinder and piston kits make going to the max bore size easy. There is no machining required and stock engine height is maintained. These kits come with nearly everything needed to get the most out of the added cu. in. to your stock engine. You won't believe how much power these kits produce! Features and specifications: * Kit yields excellent results with stock cylinder heads * Easy installation—no need to bore or split existing cases, just swap the cylinders * Available in a choice of either black or silver powdercoat finish with polished fins * Increased fin area for better heat dissipation * Valve pocket recessed in S&S pistons are enlarged for oversize valves and higher lift cams
Not Yet Reviewed
$1,345.95
S&S Cycle 883 to 1200cc Hooligan Cylinder Kits
An 883 to 1200cc Hooligan cylinder kit for a Harley-Davidson®, like the ones made by S&S Cycle, provides a significant increase in engine displacement, resulting in substantially more power and torque without requiring major engine modifications, making it a popular upgrade for riders seeking better performance on their Sportster 883, with benefits like increased horsepower—by boosting the engine size from 883cc to 1200cc, the Hooligan kit delivers a noticeable power gain, allowing for better acceleration and highway cruising capabilities. Typically these kits are designed as "bolt-on" upgrades, meaning they can be installed without needing extensive machining or engine rebalancing, making the process relatively simple and straightforward. Compared to a complete engine rebuild, a Hooligan kit is a cost-effective way to significantly improve your bike's power. When installing a Hooligan kit, it may be necessary to upgrade the clutch to handle the increased torque produced by the larger engine. Depending on the specific kit and your bike setup, you may need to adjust fuel injection mapping to optimize performance.
Not Yet Reviewed
$1,095.95
Cylinder Works Big Bore Cylinder Kits
Eliminate the wait with Cylinder Works big bore cylinder kits. They arrive ready to install, eliminating the hassle of sending out your cylinder for re-plating or boring, and they're competitively priced compared to typical re-plating costs. These Cylinder Works cylinders look virtually identical to your OEM parts and are conveniently available in "stealthy" big bore sizes. Cylinder Works big bore cylinder kits come in a variety of sizes, so choose the one that best fits your application. Features include: * Super-convenient--just purchase and install * Nickel silicon carbide plated for long life * Honed to exact size for easy piston installation * Complete with gaskets, cylinder, and piston kit * No machine work required
Not Yet Reviewed
$1,297.65
Summit Racing™ Pro LS Piston and Rod Kits
Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control
( 19 )
$1,470.97
—
$1,499.97
Edelbrock Performer RPM Cylinder Heads
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 168 )
$1,001.50
—
$1,441.50
Brodix Cylinder Heads IK 200 Cylinder Heads for Small Block Chevy
Brodix Cylinder Heads IK 200 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads are specifically designed for optimum versatility. Features: * 200cc intake ports * 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks
( 38 )
$1,357.99
—
$1,493.99
Summit Racing™ 64cc Aluminum Cylinder Heads for Small Chevy
Don't sacrifice quality for a low price--get both with our Summit Racing™ 64cc aluminum cylinder heads for small Chevy. The lightweight heads are cast from A-356 aluminum alloy and have 200cc intake ports, 64cc combustion chambers, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have 2.02 in. intake and 1.60 in. stainless steel exhaust valves, valve springs, 7 degree valve locks, 3/8 in. rocker arm studs, and 5/16 in. guideplates.
( 30 )
$1,329.99
Brodix Cylinder Heads IK 180 Cylinder Heads for Small Block Chevy
Brodix IK 180 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads offer the following features: * 180cc intake ports and 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks
( 31 )
$1,339.99
—
$1,493.99
BoostLine Connecting Rods
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$1,099.99
—
$1,424.99
Edelbrock Performer Cylinder Heads
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,059.50
—
$1,459.50
COMP Cams Xtreme Energy Retrofit Cam and Lifter Kits
COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 41 )
$1,152.95
—
$1,246.95
March Performance Ultra Series Chevy Small Block Serpentine Kits
March Performance Ultra Series Chevy Small Block serpentine systems bolt to the front of 1969 or later small block Chevy heads. Precision CNC-machined from solid billet 6061-T6 aluminum to fit perfectly and handle high torque and vibration, these bracket kits come complete with stainless steel tensioning rods and chrome moly rod ends for high performance operation. All necessary hardware included. Powdercoated to eliminate polishing in those hard to reach places. Matching serpentine pulleys are precision CNC-machined from 6061-T6 aluminum. This is the same material March uses for NASCAR pulleys! These pulleys will not fracture like common cast pulleys. High tensile strength means much longer wear. March hard coats the high-wear areas on the high-water flow ratio pulleys! The street rod ratio increase water flow and fan speed. This helps at critical low speed driving.
( 10 )
$1,139.99
—
$1,148.99
Mahle PowerPak Pistons
Mahle PowerPak pistons are forged pistons with steel pins and wire locks. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. Part numbers with T on the end have a cutting edge ceramic-based thermic barrier. The barrier is resistant to thermal shock, insulates the piston crown, and reduces heat transfer to increase performance. These replacement pistons are available in a wide variety of size options for fitment with specific engines and pistons.
( 2 )
$1,003.19
—
$1,412.73
COMP Cams XFI VSR Modular 3V Camshafts
Ford 4.6L/5.4L modular 3-valve engines found in 2005 and newer Mustangs are all the rage. So the question on everyone's mind becomes, "How can I further improve the performance of these powerful engines?" COMP Cams XFI VSR Modular 3V (Valve Springs Required) Camshafts deliver a great power improvement over stock levels. These cams are the next step up from the COMP Cams NSR (No Springs Required) Cams and represent a major upgrade in power production. When compared to the NSR, stock valve spring compatible cam series, the VSR cams offer a substantial power gain in the higher rpm ranges. To achieve this, a high-lift design that requires a COMP Cams Beehive Valve Spring upgrade was created to maximize power within the limits of the OEM unmodified cam phasers. These new VSR camshafts are available for both naturally aspirated and supercharged engines, with two levels available in each series; one designed for maximizing mid-range power and torque, while the other maximizes top end horsepower. The performance secret behind these camshafts is in the extensive dyno testing that allowed them to determine precise cam timing events. Combining these optimized timing events with a high-lift lobe design offers substantial improvements in both power and throttle response. Designed to work flawlessly with the factory VCT, which is programmed to retard the cam timing above 4500 rpm, the new COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3V Cams optimize both mid and high rpm performance.
Not Yet Reviewed
$1,028.95
Moroso Pro Eliminator Oil Pans
Looking for a great Pro Eliminator oil pan? Look no further than Moroso. These oil pans feature: * Partitioned and louvered windage tray with baffles to divide mains; separates oil quickly from rotating assembly for ultimate oil control and maximum horsepower gain * Billet end caps with extremely close tolerances * Innovative pro sump design baffling system prevents oil from climbing pan walls, keeping oil contained in the pickup area during hard acceleration and braking * Maximum-size double kickouts collect oil thrown from the rotating assembly, reducing windage and increasing power * Two -8 AN drains and an oil pump access bung allow oil pressure adjustment on pumps with adjustable bypasses * Removable plugs with O-ring seal provide convenient access to pan mounting bolts * Bolt holes are relocated to avoid interference with rods, allowing longer strokes (requires drilling and tapping of block pan rail on some blocks)
( 7 )
$1,023.38
Isky Red-Zone EZ-Roll Roller Lifters
Get the most out of your high performance engine with these Isky Red-Zone EZ-Roll roller lifters. Your lifters have to take a lot of abuse between radical cam profiles and serious spring pressures, so going with anything less than the toughest available would be a mistake. These Isky Red-Zone EZ-Roll lifters are designed from the ground up with the latest technologies to withstand what your all-out performance engine can throw at them. Isky replaced the traditional needle bearings with the tough-wearing, low-friction Epsilon-Z solid bearing raceway that better distributes the forces, resulting in much more even wear. Add the advanced full spectrum three-point oiling system that provides a continuous oil supply to the bearings and you end up with a lifter that will last, even when subjected to opening pressures of up to 750 lbs.! Spend less time rebuilding your engine and more time doing what you love by upgrading to these Isky Red-Zone EZ-Roll roller lifters!
Not Yet Reviewed
$1,342.99
Moroso Donovan Oil Pans
Moroso makes these oil pans for your drag racer with Donovan engines. Features include: * Billet end caps with extremely close tolerance * Box-style aluminum pan features relocated bolt holes to avoid interference with rods and allow for longer strokes; will fit virtually any rod-stroke combination * Maximum size double kickout, trim-to-fit crankshaft scraper, and unidirectional windage tray screen separates oil quickly from rotating assembly for ultimate oil control and maximum horsepower gain * Trap door baffle contains oil in pickup area during hard braking
( 1 )
$1,277.99
March Performance Small Block Chevy Ultra Serpentine Conversion Kits
March Performance small block Chevy Ultra serpentine conversion kits will make it easy to convert your old V-belt pulleys. They bolt to the front of any 1969 or later small block Chevy heads and are precision CNC-machined from solid billet 6061 T-6 aluminum to fit perfectly and handle high-torque and vibration. The included bracket kits come complete with stainless steel tensioning rods and chromoly rod ends for high performance operation. Required mounting hardware is included and is powdercoated to eliminate polishing in those hard-to-reach places. Matching serpentine pulleys are precision CNC-machined from 6061 T-6 aluminum. These pulleys will not fracture like common cast pulleys because they are hard coated in the high-wear areas on their high water flow ratio pulleys. The street rod ratio increases water flow and fan speed. This helps at critical low-speed driving.
Not Yet Reviewed
$1,126.99
—
$1,370.99
COMP Cams Sportsman Solid Roller Lifters
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$1,212.95
—
$1,310.95
Clearance
Pro-Filer Performance Products Small Block Chevy All American Cylinder Heads
Pro-Filer small block Chevy All American cylinder heads have a 23 degree valve angle, providing bolt-on compatibility for stock accessories. They're designed for all-around racing and are offered with 185cc, 195cc, 210cc, 235cc intake ports; 64cc, 68cc, 70cc, or 72cc chambers; and straight or angled spark plug locations. You can order the heads assembled or unassembled for engine builders. End pads are drilled and tapped for accessories, and bronze guides are included to reduce stem wear. Nearly 200 models are available; order the heads with options recommended for your application. Whether you're running on the street, strip, or track, equip your ride with Pro-Filer small block Chevy All American cylinder heads. Additional features: * Revised spark plug location to improve flame travel * Uses gasketed 3/4 in. reach plugs like NGK R5671-7 Series
( 4 )
$1,075.00
