Availability
AFCO Racing offers a comprehensive line of bolt-in direct fit aluminum radiators in crossflow and downflow styles. All AFCO radiators offer a furnace brazed sealed core without the use of epoxy and are all tested before shipping. Order the fitment specific to your vehicle application. Bolt-in direct-fit radiator features include: * Aluminum construction * 100 percent TIG-welded * Pressure-tested * Pre-drilled mounting holes * Filler neck and drain petcock * Two rows of 1 in. tubes for the maximum cooling available for your vehicle
( 13 )
$1,023.99
—
$1,366.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 16 )
$1,359.99
—
$1,470.99
Optimize your cooling power with PWR North America OE fit radiators. They are built using the latest aluminum core designs and manufacturing techniques by highly skilled fabricators and welders. These PWR OE fit radiators bolt directly to your stock core support for an accurate fit and a hassle-free installation. PWR North America is a world leader in providing quality cooling solutions designed to meet demands across a wide range of industries. Select the OE fit radiator that is suited to your application needs.
Not Yet Reviewed
$1,049.00
—
$1,459.00
Improved Racing performance oil cooler kits add massive cooling capacity under your hood. Oil temperatures in track conditions often reach as high as 300 degrees F with the factory setups. These coolers will lower peak oil temps by as much as 30 to 50 degrees F. And—the kits are not only essential for track use, but also perfectly streetable! A built-in thermostat allows engine oil to reach safe operating temperatures much faster than the factory cooling systems. Constructed from plate aluminum, the bolt-on coolers are available for a variety of applications—including Corvettes from 2005 and up.
Not Yet Reviewed
$1,199.00
The aFe BladeRunner GT Series radiators will keep your Jeep Wrangler JK with the 3.6L engine running cooler, longer. The unique 1 3/4 in. bar and plate aluminum core design and aluminum end tanks are built to manage rock-crawling and street hauling. The BladeRunner GT Series radiator kits include upper and lower 5-ply poly reinforced silicone hoses and quality stainless steel, T-bolt clamps for a simple, secure installation. Additional details: * BladeRunner GT Series radiator features a unique 1 3/4 in. bar and plate core design for greater heat dissipation and better coolant flow for optimum cooling efficiency * 100 percent TIG-welded for race-proven strength and durability * Aircraft-grade aluminum construction and larger core offer 25 percent more coolant capacity to maintain cooler temperatures * The unique end tanks are constructed from 1/8 in. TIG-welded aluminum plates for strength and durability * Features 1 1/2 in. diameter billet aluminum inlet and outlet for long-lasting reliability * Includes a brass drain valve with a barbed fitting to connect a hose for draining coolant easily and mess free * Includes high-quality, stainless steel, T-bolt clamps, and heavy-duty 5-ply silicone hoses for strength * Both upper and lower 5-ply polyester reinforced silicone hoses can withstand elevated temperatures and outlast rubber factory hoses * Custom appearance with brushed aluminum finish with an aFe Power logo painted on the front * Radiator hoses are finished in black silicone with an aFe Power logo printed on them * Utilizes the factory mounting locations to provide stability for a hassle-free installation * Includes 1.3 Bar radiator cap
Not Yet Reviewed
$1,242.15
Be Cool aluminum radiator power cooling modules are designed to properly cool your vehicle. Kits include: * Aluminum dual 1 in. core performance radiator with oval fluted tubes * Aluminum fan mounting brackets or straps with hardware (where applicable) * Diamond-cut, vented coolant recovery tank (where applicable) * Fan wiring harness(es) with 40 amp relay(s) * Be Cool billet radiator cap (when noted) * One 16 in., dual 11 in., or two 13 in. high-torque Euro black electric puller fan(s) (in selected kits) * Natural or polished aluminum finish * Bolt-in installation * Fan upgrades sold separately
Not Yet Reviewed
$1,299.99
—
$1,499.99
DeWitts dual 11 in. brushless fan kits were a result of a collaboration between DeWitts and Spal USA. Featuring a sleek, computer-designed ballistic injection molded shroud and two Spal Plus Series brushless fans, these systems move a combined 2,884 CFM, making them ideal for extreme performance demands and high-heat environments. They are direct-fit replacements for Spal dual brushed fan kits, sharing the same bolt pattern for quick and easy installation. Spal brushless fans were developed and designed with cutting-edge technology, high-energy ferrite magnets, and a state-of-the-art sine wave sensor-less drive. These motors reach more than 82 percent electrical efficiency, placing the 300-watt power range products among the most efficient motors anywhere. The result is high air-side performance at minimum electrical load. The brushless motor is fully sealed to be IP68 and IP6K9K compliant (water and dust proof) and can operate in the presence of many aggressive or hazardous substances. Each DeWitts kit includes everything needed: fan, harness, jumper, temperature sensor, and flaps. Additional features: * Quiet pulse-modulated variable speed operation * Fits any crossflow radiator with mounting tabs * Wiring requires no harness or computer modifications * Low amp draw soft start technology with 175 degrees on and variable to 205 degrees full speed
Not Yet Reviewed
$1,499.99
PWR North America drag racing radiators truly outshine the competition. The drag race radiators are manufactured from high-quality materials and PWR's Scirocco-style radiators bolt into the industry standard locations and have universal inlets and outlets. These drag race radiators are also offered with or without a Meziere or Stewart electric pump mounted to the radiator. So, whether your ride is a front engine door-slammer, pro-stock, super gas, super mod, or a rear engine dragster, PWR North America has you covered!
( 1 )
$1,009.00
—
$1,295.00
PWR North America universal radiator modules are designed to keep your ride cool. PWR added the 16 in. fan ring currently used in NASCAR, as well as a high performance SPAL fan to their universal radiators. The fan ring is water jetted out of .100in. thick aluminum and is bolted to the radiator, making for a stronger unit. Bolting the fan to the radiator eliminates the chance for the fan to move around on the radiator, as well as seals the fan to the core which increases the cooling capability. These radiators come pre-assembled with high performance 16 in. SPAL curved blade puller fan and a SPAL 40 amp relay. The radiator features a unique replaceable inlet (not included) which is available in 1.25 in., 1.5 in, 1.75 in., -16AN male and -20 AN male sizes. Order the application you need.
Not Yet Reviewed
$1,039.00
Sikky Manufacturing LS swap radiators are the end-all solutions for your cooling system with an LS swap. These bolt-in units simplify the chore of getting a properly sized radiator into a tight engine compartment. Sikky starts with a custom core and designs end tanks and mounting points to fit like stock. The 2.25 in. dual pass radiators are sure to keep up with the cooling demands of your engine for both street and track use. Sikky positioned the inlet and outlet of each radiator in a way to work seamlessly with any LS-based engine water pump inlet and outlet. They also incorporated a fan shroud that allowed the mounting of high flowing SPAL fans while keeping a very low profile for maximum clearance with the engine pulleys. Sikky Manufacturing LS swap radiators deliver maximum cooling capacity and perfect fitment to make your life easy, keeping your LS-powered vehicle cool. Choose the one designed for your vehicle. Additional features: * 6061 billet aluminum mounting points * Utilizes factory mounting locations * No fabrication required
Not Yet Reviewed
$1,329.99
KNS Accessories radiator shells are manufactured from high-quality stamped steel or stainless steel, available in a variety of finishes—with and without stock mounting holes and crank holes (depending on model). Order the decorative shell designed for your application. Restore or restyle your vintage automobile with help from the classic experts: KNS Accessories.
( 3 )
$1,036.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
