Availability
Wilwood AERO6 radial-mount caliper kits add superior stopping power and style to your vehicle's suspension. They provide you with positive and confident pedal response that's matched to the OE master cylinder output—and are fully compatible with the ABS system. AERO6 radial-mount calipers equip you with race-proven technology in their high-strength, forged triple bridge body design. In addition, their BP-20 dual-sport compound Smart Pads offer clean and quiet driving on the street, as well as improved friction and high-temperature fade resistance for autocross and other sport driving applications. Additional details: * Four pistons per caliper * Aluminum caliper material * Finishes include: nickel plated, powdercoat, anodized * Available in various rotor thicknesses and piston diameters
( 2 )
$1,183.86
If you're replacing the rear brake shoes for your parking brake and have a desire to have discs all around, Wilwood DynaPro Lug Mount rear parking brake kits have a complete solution for rear axles that require a parking brake. Included are forged billet piston calipers, one-piece drum/rotors, and high-friction pads, as well as all necessary hardware to provide improved braking for the custom machine you drive. These kits are designed to fit OE factory spindles, allow for a clear-cut install, and will provide exceptional holding power for the parking brake. Various caliper finishes and rotor designs allow you to choose the essential style and brake performance for your personal application.
( 10 )
$1,107.06
—
$1,392.51
Wilwood Narrow DynaPro radial mount brake kits equip your UTV for increased performance. Motorsports-proven, stress-flow forged aluminum Narrow Dynapro radial mount (NDPR) front and rear calipers provide superior strength to reduce deflection under extreme use. Users will experience better pedal feel, increased brake torque, and longer pad life. Stainless steel pistons are equipped with high-temperature seals to protect brake fluid from heat and dirt. Along with the calipers, these Wilwood kits designed for popular Side x Side machines include larger diameter steel rotors mounted to lightweight aluminum hats to reduce piston knockback. The steel rotors improve thermal capacity, are black E-coated, and are available with a plain face or drilled. Calipers are available in a glossy red or black powdercoat with Wilwood's high-performance BP-10 SmartPads. Select a kit with the caliper finish and rotor design preferred for your off-road vehicle.
Not Yet Reviewed
$1,515.91
—
$1,548.25
Strange Engineering's stainless steel brake kits are designed for drag racing's most abusive applications, offering drag racers a safer and more efficient alternative to conventional carbon steel brakes. Strange's Dynamic Drive Mount (DDM) system secures the stainless rotor with an internal Spirolox--eliminating all thermally generated stress from rotor attachment points and further reducing rotating weight. The system also permits the hat and rotor to expand and contract independently, allowing for thermal expansion, which drastically reduces warping, coning, and cracking. Strange Evolution Dynamic Drive Mount brake kits feature Evolution S DDM stainless steel rotors machined from premium stainless billets, proprietary heat treated, and fully ground. The kits also contain Evolution 4 calipers, high performance metallic or semi-metallic brake pads, additional components, and hardware. Together they produce more efficient accelerating and stopping of your drag racing vehicle. Kits are available for front or rear. Choose those designed for your vehicle. Evolution S DDM rotors: * Mounts to billet aluminum DDM hat reducing rotating weight * Exhibits 48 percent greater yield strength at 1,000 degrees F compared to carbon steel, further maintaining rotor integrity * Highly resistant to heat and corrosion * Unique Aero Slot design reduces rotating weight and promotes even heat dissipation, compared to common round drilled holes * Scalloped design further reduces rotating weight 4-piston billet Evolution 4 calipers: * Computer finite element analysis (FEA) optimized and field-tested caliper -- Design improves piston retraction, pedal feel, and stiffness -- Results in improved pad wear and exemplary braking efficiency * High-retraction piston and O-ring design to eliminate drag during acceleration * Stainless steel pistons mitigate heat transfer to brake fluid * Reverse dish pressure vessel piston maximizes stiffness * All 1.750 in. pistons provide increased clamping force * Type II black anodized finish resists corrosion, heat, and brake fluid Aluminum caliper mounts: * Billet one piece design * Eliminates bolts, spacers, and nuts that require periodic maintenance Brake pads: * DTC-30 semi-metallic brake pads -- Available in rear or front kits -- Provides the best starting line cold holding power -- Recommended for vehicles going 150 mph or less in the 1/4 mile * DRM-35 metallic brake pad -- Available in rear kits only -- Provides high resistance to brake fade -- Recommended for vehicles going over 150 mph in the 1/4 mile -- Maintains decent starting line cold holding capabilities -- May leave pad residue on rotors when not using parachute -- While common, it's recommended to remove when installing new pads Housing end stud kits: * Rear kits * Provides additional components not supplied in most aftermarket kits Screw-in wheel studs: * Front kits * Tapered Allen 1/2 in.-20 x 2 1/2 in. Billet aluminum hubs: * Front kits * Strong lightweight material * Lightening holes for enhanced weight reduction * Billet hub caps with O-rings and Strange branding * Bearings, races, and seals
Not Yet Reviewed
$1,094.99
—
$1,549.99
Wilwood SX6R forged radial mount calipers incorporate race technology into a body design with widespread adaptability to deliver heavy-duty stopping power for the road or track. Radial mounting, multiple options for piston volume, and a rotor diameter capability ranging of up to 15.00 in., gives the SX6R 6-piston calipers the versatility necessary to suit all types of heavyweight braking requirements. They also incorporate Wilwood's exclusive dust wiper seal that further protects the piston bore from dust and corrosion, allowing the caliper to be used in locales that mandate a method of environmental sealing. The bodies of Wilwood SX6R Series calipers are stress-flow forged from premium aluminum alloy billet--a process that eliminates the stresses and interruptions to the internal grain structure, resulting in superior clamping efficiency and ultimate strength against fatigue, stresses, and distortion under load.
Not Yet Reviewed
$1,058.72
Making drag race vehicle builds much easier, Wilwood's XRD single caliper dynamic mount drag race brake kits package their XRD calipers and 11.25 in. super alloy scalloped and drilled rotors that are compatible with many popular drag race rear axle flange types. These kits are perfect for racing cars with wider tires that rely heavily on the rear brakes for more stopping power. These single caliper kits star Wilwood stress-flow forged aluminum XRD calipers, featuring the latest FEA (finite element analysis) computer design technology to shed weight while maintaining rigidity. Choose the configuration best suited to your vehicle's weight, power, and chassis setup. Kit features: * XRD calipers -- Forged aluminum, 4-piston -- Type III hard anodized inside and out, including piston chambers -- High temperature seals * SA scalloped rotors -- Lightweight 11.25 in. rotors -- Allow more clearance for use on typical 15 in. rear beadlock wheels -- High resistance to thermal distortion * Lug-drive dynamic rotor mounting system uses a large single internal snap-ring that retains the rotor in the hat, allowing both to heat cycle independently * BP-28 brake pads with medium to high friction that increases with rotor temperature, providing a predictable, consistent pedal feel * Rotor wear clips and premium-grade hardware
Not Yet Reviewed
$1,630.75
Add the safety, reliability, and performance of disc brakes to your vehicle LEED Brakes spindle-mount front disc brake conversion kits. Spindle-mount kits include everything you need to mount front disc brakes to your vehicle minus the master cylinder and power brake booster. All components used in these kits are new high quality, precision machined products. Choose the one designed for your vehicle.
Not Yet Reviewed
$1,169.99
—
$1,624.99
Wilwood Narrow DynaPro radial mount race brake kits equip your UTV for high performance. Motorsports-proven, stress-flow forged aluminum Narrow Dynapro radial mount (NDPR) front and rear calipers provide superior strength to reduce deflection under extreme use. Users will experience better pedal feel, increased brake torque, and longer pad life. Stainless steel pistons are equipped with high-temperature seals to protect brake fluid from heat and dirt. Along with the calipers, these Wilwood race-spec kits designed for popular Side x Side machines include larger diameter steel rotors mounted to lightweight aluminum hats to reduce piston knockback. The 11.25 in. (285mm) steel rotors improve thermal capacity and are black E-coated. The calipers are Type III hard anodize finished and fitted with Wilwood's BP-28 pads.
Not Yet Reviewed
$1,515.91
Wilwood Billet Narrow Dynalite radial-mount inboard brake kits feature a fully engineered bolt-on brake system for sprint car quick-change rears with 3.00 in. x 46 splined axles. Available in several choices, the kits will have titanium, Super Alloy, or steel .810 vented or solid discs and a newly designed dynamic mount rotor axle clamp, providing the lowest rotating weights available for Sprint racing. The lightweight advantages of Wilwood Sprint rotors are fortified with the high durability, long wear, and superior heat control properties of the advanced materials used. The billet Dynalite radial mount 4-piston calipers are Type III Anodized and will be fitted with composition metallic or BP-40 pads to produce superior stopping power and a consistent fade-free response. Kits will also include an axle clamp with a dual mount rotor adapter with T-nuts, radial mount bracket assembly, and mounting hardware. Choose the preferred kit for your braking needs.
Not Yet Reviewed
$1,467.35
Wilwood DynaPro lug-mount front dynamic drag brake kits are sure to become very popular with drag racers. With forged aluminum and strong steel, these DynaPro kits still provide an average weight savings of over 30 lbs. compared to stock drum or disc brakes. DPL kits are available for the popular musclecar spindles and struts used on 4-wheel disc cars weighing up to 2,800 lbs., or rear drum brake-equipped cars weighing up to 2,400 lbs. Order the kit designed for your vehicle application. Wilwood front dynamic drag brake kits feature: * Dynamic rotor mounting adapters with T-nuts promote less distortion due to temperature and extend rotor life * Forged billet aluminum 4-piston nickel plated calipers with stainless steel pistons * Calipers mount directly to the spindle with an aluminum bolt-on bracket * Forged billet aluminum 5-lug hubs * Drilled, black oxide coated steel rotors * New hardware, wheel bearings, seals, and extra-length lug studs
( 1 )
$1,118.96
On Sale
BD Engine Brakes enable your diesel to navigate downhill grades and mountainous terrain easier and safer than the vehicle's conventional braking system. This will increase the life of the stock foundation brakes and prevent brake fade under severe-grade driving. The factory-approved backpressure provides the retarding horsepower to slow down the vehicle on even the steepest descents, or just for a highway off-ramp. The exhaust flow is not restricted when the stainless butterfly is open in the large 4 in. casting that bolts into the exhaust system. The kits come with a lighted toggle switch for mounting conveniently on the dash. The brake releases as soon as the throttle is applied or the switch is flipped off. As with other BD designs, the backpressure is self-regulating. Once the pressure reaches specification, the butterfly position changes to maintain the highest pressure possible. This variable orifice design offers far superior retarding performance throughout the engine rpm range, compared to a fixed orifice design that only offers peak retarding performance at peak rpm.
( 2 )
$1,674.95
$1,247.36
—
$1,507.46
Lifted 4x4s with taller and heavier tire and wheel combinations need Wilwood Forged Narrow Superlite 4R big brake front brake kits to restore stopping power. SL4 kits are specifically engineered per application, but all revolve around Forged Narow Superlite 4R four-piston stainless steel calipers with their 4-symmetrical bores and high clamping force. Oversized, proprietary iron alloy, Spec 37 rotors withstand extreme temperatures and have a high degree of resistance to warping, cracking, distortion, and wear. Both of these parts are built to work hard without issues, but Wilwood's kit doesn't stop there. They also feature forged aluminum mounting hats, BP-10 Smart Pads to increase friction and reduce pad dust, radial mounting brackets, and hardware. Custom wheels and tall tires give character and off-road prowess, but if you can't stop them you're destined to hurt yourself and many others. Wilwood Forged Narrow Superlite 4R big brake front brake kits will help reel in your beast.
( 1 )
$1,095.88
—
$1,644.44
Wilwood Narrow Dynapro-P radial rear brake kits are engineered as high performance street and race for 1969-1983 Porsche 911's with 3.50 in. caliper mounts. These rear brake kits combine the high-tech styling and superior performance of the NDPR-P calipers and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. The kits include plain face or SRP drilled one-piece rotors made from proprietary alloys, and bolt directly to the front strut without the need for additional brackets or adapters. These kits also included braided stainless flex lines. Order the brake kit for your application needs.
Not Yet Reviewed
$1,016.13
—
$1,153.63
Wilwood Powerlite front brake kits allow easy upgrade to 4-piston Powerlite calipers, one-piece rotor and hat assemblies formulated from proprietary iron compounds and BP-10 performance pads using the stock rotor and spindle mounting. These Powerlite front brake kits are available in drilled, undrilled, and drilled-slotted applications and come complete with hardware and stainless steel flex lines. Order the brake kit for your application needs.
Not Yet Reviewed
$1,014.69
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z36 Truck and Tow brake upgrade kits with calipers are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. These brake pad, rotor, and caliper kits come with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. PowerStop's Z36 Extreme low-dust ceramic brake pads are reinforced with carbon fiber to provide severe-duty stopping power without sacrificing everyday drivability. They are paired with drilled, slotted, and zinc plated rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. The bright red powdercoated calipers are not only protected against corrosion, but also stand out behind your wheels. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, choose easy and affordable, bolt-on performance upgrades—PowerStop Z36 Truck and Tow caliper brake kits.
( 553 )
$1,227.84
Wilwood forged Dynalite rear parking brake kits provide the best solution for many rear axles requiring a parking brake. The forged billet Dynalite 4-piston calipers, one-piece drum/rotors, and high-friction pads provide balanced braking for all types of performance street, strip, and show machines. Their internal shoe parking brake design stays hidden, but has excellent static holding power for parking. Wilwood offers optional caliper finishes and rotor designs to enable the builder to personalize the style and optimize brake performance for every individual application.
( 122 )
$1,059.43
—
$1,231.58
For popular musclecar rear axle applications needing a parking brake assembly and some extra clearance, Wilwood Forged DynaPro low-profile rear parking disc brake kits provide the solution. Forged billet DynaPro low-profile 4-piston calipers, 11 in. one-piece hat and rotor assemblies, and high-friction pads provide optimal balanced braking for your performance street/strip and show machines. Choose either solid-surface or cross-drilled and slotted rotors to personalize your style and optimize brake performance. These Wilwood brake kits also feature a neatly hidden internal shoe system for a clean installation and superior static holding power for parking. Get bolt-on performance and looks for competition or show with Wilwood Forged Dynapro low-profile rear parking disc brake kits.
( 67 )
$1,059.43
—
$1,214.25
Upgrade your braking system with SSBC-USA's drum to disc brake conversion kits. You'll enjoy the rhythm of modern stopping power afforded you with their cast iron or aluminum calipers, brake pads, rotors, and all necessary brackets, hardware, and bolts. Order the SSBC-USA drum to disc brake conversion kits designed for fitment on your vehicle—front, rear, or both.
( 32 )
$1,026.00
—
$1,466.00
LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.
( 70 )
$1,014.99
—
$1,679.99
On Sale
Increase your driving confidence and towing safety with the superior retarding performance of BD Diesel exhaust brakes. Using BD's exclusive Variable Orifice Technology, the turbo-mount design bolts in place of the factory elbow between the turbo and the exhaust system. This provides peak retarding power throughout the engine's rpm range—not just at high rpm like other brands. The remote-mount models, meanwhile, attach in the exhaust pipe and are perfect for modified applications. Some kits include an air compressor. Order the universal or vehicle-specific brakes best suited for your rig.
Not Yet Reviewed
$1,674.95
$1,365.26
—
$1,516.95
Centric Preferred axle packs deliver pre-selected components perfectly matched for assured fit and performance. Preferred packs are for drivers who seek premium direct-replacement parts that offer low-dust and low-noise, with improved service life and braking performance. These axle packs may contain Centric's Premium black or high-carbon alloy rotors, along with Posi-Quiet premium pads. Order the assembly designed to fit your vehicle application.
( 10 )
$1,497.99
Wilwood forged narrow Superlite 6R Big Brake front brake kits upgrade your late model ride with increased brake capacity and complimentary style. They're application-specific for a simpler installation and offer full compatibility with OE master cylinder output and ABS functions, where used. These front brake kits feature the extremely durable and efficient body design of their forged narrow 6-piston radial mount calipers. You can choose from optional caliper finishes and rotor designs to meet your personal style and braking requirements. Don't just replace—upgrade to generate big stopping power with Wilwood forged narrow Superlite 6R Big Brake front brake kits.
( 101 )
$1,198.44
—
$1,604.34
Wilwood's Forged Dynalite Pro series front disc brake kits are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite calipers with the added performance and cooling capacity of competition-style vented rotors. Other features include hubs, brake pads, caliper brackets, mounting hardware, and detailed instructions for an easy bolt-on installation. In addition to everything else, these kits can also cut as much as 35 lbs. off of your front-end.
( 200 )
$1,057.29
—
$1,535.86
Do you want to get rid of your old-fashioned rear drums and upgrade to modern disc brakes without giving up the parking brake? Wilwood has the answer with their high performance Forged Dynalite Pro series disc rear parking brake kits. They combine forged, 4-piston, forged billet Dynalite calipers and big solid or vented iron rotors with integral parking brake "hats." This gives you big-time stopping power and still maintains the parking function. These kits also include preassembled parking brake mechanisms, PolyMatrix brake pads, mounting brackets, and all necessary installation hardware.
( 23 )
$1,059.43
—
$1,395.06
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
