Availability
Moeller Marine permanent fuel tanks feature robust polyethylene construction and include swivel pick-ups. They're available in a large selection of shapes, sizes, and capacities up to 150 gallons. Fuel your fun with Moeller Marine permanent fuel tanks. Tank specifications: * Machined aluminum 3/8 in. withdrawal fitting with 360 degree swivel pop lock for hook-up convenience * Ethanol and biodiesel corrosion- and pit-resistant * Complete with fill neck and withdrawal/vent fittings molded directly into the shell * ABYC-compliant fittings with seamless connections to rigid low-perm hoses * UV rating of 8 * Temperature rating of -40 to 176 degrees F * Suitable for either gasoline or diesel use with appropriate return kit * Hold-down grooves molded directly into tank shells for secure attachment with Moeller hold-down kits * Suitable as replacement tanks for boats built before 2011
( 14 )
$1,027.99
—
$1,731.99
Quick Fuel M-Series carburetors launch high performance for your watercraft. QFT marine performance carburetors are specifically engineered for the positive and smooth fuel delivery that's vital to your power boat. M-Series carburetors all feature billet metering blocks for exceptional strength, interchangeable air bleeds, restrictions for fine tuning, and PTFE coated throttle shafts and bearings for smooth throttle response. Plus, they offer aluminum fuel bowls with integral sight glass windows, marine J-style vent tubes, and QuickLink secondary linkage for fast and easy changes in throttle opening rates. QFT applies a protective coating to the main carb body and fuel bowls to prevent corrosion in harsh marine environments. They are available in several cfm models, as well as a couple of special models calibrated for Roots-style 2 x 4 supercharged engines and large-displacement engines. Quick Fuel M-Series marine carburetors are hand-assembled and run-tested on real engines for precise fuel delivery and ultimate precision on the water.
( 2 )
$1,049.95
Sierra Marine carburetors are new precision castings built to meet or exceed OEM specifications. They offer several 2- and 4-barrel replacement styles to choose from. Order the model recommended for your watercraft application. Features include: * Recalibrated to maximize fuel efficiency and performance * All carburetors are flow-tested throughout the entire throttle range * Fuel mixture and idle settings are preset to ensure that only minor idle and choke adjustments are necessary during installation
( 41 )
$1,100.99
—
$1,155.99
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$1,332.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$1,299.95
—
$1,499.95
BD Diesel offers stock replacement turbochargers for a variety of brands (Dodge, Ford, Chevy, Caterpillar, Detroit, Cummins, Komatsu, Toyota) and applications (automotive, light-duty pickup, agriculture, marine, commercial, industrial, gas and diesel). The turbos are available brand new or remanufactured. They are designed and produced to factory specs, ensuring proper fit and performance.
Not Yet Reviewed
$1,215.95
Pacific Performance Engineering air-to-water intercoolers offer significantly lower pressure drop over traditional intercoolers. A compact design with a large internal core for increased heat transfer and reduced restriction, these PPE intercoolers achieve increased airflow, making the design ideal for use with high-cfm turbos and superchargers, and perfect for sled pulling, drag racing, and marine. Available with a 3 in. or 3.5 in. air inlet/outlet ducts, choose the best fit for your vehicle. Additional features: * Aluminum construction * Welded 1/2 in. NPT water inlet/outlet * Saves space in your build and increases output efficiency
Not Yet Reviewed
$1,214.99
—
$1,439.99
AED Super-Mod Series carburetors are custom-tailored for your specific application to keep you first off of the line. AED uses a specific set of parameters—engine size, rpm range, and power level—to calibrate venturi and metering sizing and properly size throttle bore and fuel circuits for maximum airflow, response, and power. AED Super-Mod Series throttle bores are fully CNC-ported, all corners are balanced, and the completed carburetors are then "wet-flow" tested to ensure top performance. Applying additional information that you provide, AED fine-tunes your selection for a custom fit for your machine. Whether you're a professional racer or an inspired amateur, AED will help you to obtain the proper carburetor to keep your runs successful.
Not Yet Reviewed
$1,017.99
AED Pro-Series drag racing carburetors are custom-tailored for your specific application to achieve high flow rates without losing acceleration or torque. AED uses a specific set of parameters—engine size, rpm range, and power level—to calibrate venturi and metering sizing and properly size throttle bore and fuel circuits. They'll increase strength and fuel atomization to produce more torque and power over a wider rpm range than previously obtained. AED Pro-Series carburetors boast fully CNC-machined, centered, and ported main bodies and custom-machined boosters; the completed carburetors are then "wet-flow" tested to ensure top performance. Applying additional information that you provide, AED fine-tunes your selection for a custom fit for your machine. Whether you're a professional racer or an inspired amateur, AED will help you to obtain the proper carburetor to keep your runs successful.
( 1 )
$1,219.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
