Availability
Showing In Stock Items. Show All 44 Items.
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$1,092.00
—
$1,344.00
Injector Dynamics ID1300x fuel injectors are high-flow models with characteristics specific to the needs of motorsport tuners. You get superior flow without sacrificing idle and cruising performance in low fuel demand situations. This perfect balance between reliability and performance makes the 1300x Series one of the most popular options in today's motorsports. These injectors not only work with gasoline, but any ethanol fuels your engine is tuned for. The stainless internals prevent corrosion, add durability, and provide dependable flow in high performance engines. Order the ID1300x fuel injectors recommended for your vehicle.
( 1 )
$1,170.75
—
$1,417.50
Injector Dynamics ID2600x fuel injectors are developed specifically for use with liquid fuels, featuring corrosion-resistant internals, and long-term compatibility with ethanol and methanol. ID2600-XDS fuel injectors have the highest flow rate of any injectors offered by Bosch and flows 50 percent more than the ID1700x units. Injector Dynamics ID2600x fuel injectors feature Dual Slope Matching, a method of matching the flow rate in both the linear and nonlinear operating range, to provide better cylinder-to-cylinder consistency at low pulse widths.
Not Yet Reviewed
$1,440.60
—
$1,449.00
FAST LSXRT intake manifolds are designed specifically for GM truck engines (4.8L, 5.3L, and 6.0L) and LS1, LS2, and LS6 race applications where hood clearance is not a concern. FAST LSXRT 102mm intake manifolds follow the path chartered by the original FAST LSX Gen III intakes by featuring a modular design that allows for easy porting and disassembly and a runner design that yields an incredible 25 peak horsepower gain over the stock intake (on a stock 6.0L engine with a Big Mouth 102mm throttle body). Similar to the LSXR 102mm intake manifold for cars, the LSXRT features the ability to remove individual runners for modification. LSXRT's are constructed from a proprietary precision injection molded polymer which offers many benefits, including lighter weight, greater strength and lower heat soak propensity. While they feature a 102mm air inlet that was designed for the FAST Big Mouth 102mm throttle body, they can also be used with stock 90mm or aftermarket 92mm throttle bodies (78mm three-bolt throttle bodies require an adapter). Other features include integrated nitrous bungs and precise bolt-on fit that permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues. Some GM truck models may require the FAST 92mm or 102mm throttle body.
( 10 )
$1,269.95
—
$1,467.95
On Sale
When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup. These trick systems fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it—and the ability to change air/fuel ratios and ignition timing on the fly. Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind. Order the model with options best-suited for your application. Additional features: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Adjustable fan control switch * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet Flow swirl spray annual discharge obtains complete atomization * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 257 )
$1,195.99
—
$1,587.99
$1,016.59
—
$1,429.19
Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)
Not Yet Reviewed
$1,399.99
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$1,047.95
On Sale
Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps
( 20 )
$1,649.95
$1,348.95
—
$1,499.95
On Sale
If you're running a supercharger, blower, or nitrous, and want to ditch the carburetor, you'll need a FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection system. These units mount the self-adjusting ECU on the throttle body, fit any 4-barrel intake manifold, and are designed to support 250 to 600 hp engines. Each system has a hand-held controller with a touch screen for initial setup, a throttle linkage that suits most transmissions, and is manufactured with OE engineering. Models are available with or without a fuel pump. Increased performance is at hand with FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems. Additional Go EFI 4 Power Adder features: * Throttle body is boost-ready * Can change air/fuel ratios and ignition timing on-the-fly * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet flow swirl spray annual discharge obtains complete atomization * Built-in pressure regulator * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Complete tuning from Pro Laptop software * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 56 )
$1,277.00
—
$1,494.99
$1,085.45
—
$1,270.74
Holley 5.0L EFI intake manifolds may be emissions-legal, but don't let that fool you into thinking they're restrictive--they flow tons of unrestricted air! They feature a 2,000 to 6,500 rpm power band, external EGR-passage maximized port and runner sizes, and they retain the stock injector and water outlet locations. The lower manifold ports match up to Holley cylinder heads, so you can be assured of getting the perfect match in the perfect power setup.
( 5 )
$1,149.95
—
$1,249.95
On Sale
More power! FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems are for gearheads interested in major power for road courses or the racetrack, while maintaining overall drivability. These systems combine eight high-flow injectors with an annular discharge increased to 20 streams to handle the massive flow. They fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 1200 hp. The Power Adder Plus features a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it, and the ability to change air/fuel ratios and ignition timing on the fly. To obtain complete atomization, FiTech uses a swirl spray annular discharge called Wet Flow technology, spraying the fuel in from multiple directions. Go EFI 8 systems with mounted ECUs offer spark control without the need for an external spark box or special distributor. To lower temperatures and extend the unit's life, FiTech uses a voltage-controlling fuel pump control, reducing the juice under low loads. Each system has a hand-held controller with touch-screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Take on the day, no matter what it brings—with FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems. Additional features include: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace GM-type sensors and Bosch 4.2 wideband oxygen sensors * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Designed for applications making at least 6 inches of vacuum at idle. * Complete tuning from Pro Laptop software, with 8GB of data-logging
( 37 )
$1,597.00
—
$1,727.99
$1,357.45
—
$1,468.79
On Sale
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
$1,570.38
On Sale
Aeromotive brushless Eliminator Stealth fuel pumps are built for up to 65 psi of sustained pressure. They feature a bedrock solid, dual chamber roller vane design that primes easily, reduces friction and improves efficiency. Sensors monitor rotor angle providing more reliable, faster shifting, and a flatter flow curve for better consistency. This produces more torque capacity and better motor efficiency with less noise and higher reliability. The tight tolerances on these pumps result in less current draw, lower heat, and extended life. These submersible in-tank pumps feature a universal filter pickup, for an overall height adjustment from 10 to 16 inches. The competition won't have time to react, when you sneak up on them running Aeromotive brushless Eliminator Stealth fuel pumps! Features, items, and specs: * ORB-10 outlet port * Integral 100 micron pre-filter and fluted pickup * Integral external brushless controller for clean installation, cooler fuel, and enhanced reliability * Compatible for EFI or carbureted applications * Perfect for "blow-through" carbureted engines up to 1,700 FWHP * Up to 2,300 FWHP for naturally aspirated carbureted engines * Up to 1,400 FWHP for forced air induction fuel injected engines * Up to 1,900 FWHP for naturally aspired fuel injected engines * EFI rated flow of 1,000 lbs.-hr. at 45 psi, 13.5 volts * Carb rated flow of 1,300 lbs.-hr. at 9 psi, 13.5 volts * E85 compatible (reduce max FWHP by 30 percent) * Lighter than traditional Eliminator pumps * Extended service life in methanol and ethanol * Requires straight 12 V to 16 V DC power supply * Also available in an external in-line pump and installed in a Stealth fuel cell * Not compatible with pulse modulated systems or fuel pump speed controllers
Not Yet Reviewed
$1,405.25
$1,264.72
On Sale
Summit Bucks
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$1,115.95
—
$1,775.95
$1,004.36
—
$1,598.36
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$1,249.95
$1,123.95
Nitrous Express offers Next Generation complete nitrous pump stations with scale. This style pump will fill bottles faster (even with lower air pressure) than any other pumping station on the market. Includes: * NX Next Generation nitrous transfer pump with run-dry technology * Nitrous
Not Yet Reviewed
$1,030.72
Pacific Performance Engineering air-to-water intercoolers offer significantly lower pressure drop over traditional intercoolers. A compact design with a large internal core for increased heat transfer and reduced restriction, these PPE intercoolers achieve increased airflow, making the design ideal for use with high-cfm turbos and superchargers, and perfect for sled pulling, drag racing, and marine. Available with a 3 in. or 3.5 in. air inlet/outlet ducts, choose the best fit for your vehicle. Additional features: * Aluminum construction * Welded 1/2 in. NPT water inlet/outlet * Saves space in your build and increases output efficiency
Not Yet Reviewed
$1,214.99
—
$1,439.99
On Sale
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$1,399.95
—
$1,599.95
$1,258.95
—
$1,438.95
If you have a carbureted vehicle and you're on a budget or are just getting started, Nitrous Express Stage 6 nitrous systems could be the ideal beginning point. They're tunable to deliver power boosts in six graduated increments, from 50 hp all the way up to 300. That means you can pick one of the lower increases for an engine that's close to stock, and then ramp things up later on when you add forged pistons. Systems include: * Nitrous distribution plate * Supply hose and fittings * Solenoids * Switches * Wiring * Jets * Mounting hardware * Race fuel required for increases above 150 hp
( 8 )
$1,003.50
—
$1,688.25
Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems feature special mapping and the most sophisticated 2-D digital controller available for 1 to 3 mpg increases. They use a new injection management controller that allows for a small, steady spray of water/methanol to be injected across the entire power curve. By improving combustion efficiency, they provide more power and use less diesel fuel. They also now feature a brighter LCD screen that displays boost, EGTs, and injection pump output. The Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems include flow-control solenoids, a 300 psi pump, high-pressure tubing, a wiring harness, wire looms, and a optional large 7-gallon reservoir in some kits. Available for Dodge, Ford, or GM, the Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems are proven to increase fuel economy, lower exhaust gas temperatures, and increase horsepower.
( 4 )
$1,041.68
PPE's air-to-air intercoolers offer several benefits such as increased power, improved fuel efficiency, and lower exhaust gas temperatures due to cooler, denser air intake. Features like larger, higher-efficiency cores and all-aluminum construction maximize heat dissipation. Optimized internal designs, such as flow-optimized end tanks, lower backpressure and improve airflow compared to stock units. Some universal models have a compact design that allows for more flexible fitment in tight engine bays. Many PPE kits are designed as a drop-in replacement for the stock intercooler, often using factory mounting points for a hassle-free installation. Select the intercooler model designed for your application. Key features: * All-aluminum bar-and-plate construction (or brazed cores) ensures durability for high-horsepower applications * Ensures consistent engine performance even under demanding conditions * Larger intercooler core volume with a highly efficient fin layout * 77 percent reduced pressure drop for smoother engine breathing * Lowers intake air temperature * Cooler and denser charge air for increased engine/fuel efficiency * Lower exhaust gas temperatures (EGT)
Not Yet Reviewed
$1,349.99
Nitrous Express Holley Hi-Ram Plenum Plate Systems take full advantage of the Holley Hi-Ram intake manifold. The Hi-Ram plenum plate bolts right in between the upper and lower intake manifold making the install super clean and quick. These systems inject nitrous and fuel above each cylinder from the side of the runner providing direct port-like distribution without having a flow restricting nozzle or spray bar. The Hi-Ram nitrous plate is made from billet aluminum with passages machined directly into the plate so there is no need to worry about spray bars breaking or spinning. The systems come complete with billet aluminum and carbon fiber Lightning solenoids, stainless steel braided lines, wiring, switches and every nut, bolt and connector needed to install the system. The systems ordered with a nitrous bottle include a billet aluminum Lightning 500 bottle valve and the stainless bottle brackets.
Not Yet Reviewed
$1,624.48
Pacific Performance Engineering GM 3.0L Duramax air-to-water intercooler kits add style and performance to your Duramax. The intercooler is 77 percent less restrictive than the stock GM model, featuring flow-optimized, cast aluminum end tanks and a 2.4 times larger, less restrictive core structure. These features along with their all-aluminum bar and plate-style construction and superior fin layout, PPE intercoolers deliver increased cooling with a cooler and denser charge air that also helps reduce exhaust gas temperature (EGTs), increases fuel efficiency, and lowers the pressure drop. PPE's Duramax air-to-water intercooler kits are completed with a diecast support bracket, a billet aluminum turbo adapter that replaces the turbo resonator, and PPE Performance silicone couplers and coolant hoses. They are available in several finishes. Choose the preferred color for your Duramax.
Not Yet Reviewed
$1,214.99
The passion of power. BorgWarner AirWerks Series turbochargers provide durable, scalable, strong boost for enthusiasts who want a more powerful replacement or customizable turbocharger. Focused on creating exceptionally high engine performance through forced induction technology, they offer faster spool-up at lower engine speeds and powerful boost for top-end performance. The AirWerks Series includes a range of units supporting 120 to 1,875 hp per turbocharger. Depending on unit selected, features may include: * Innovative extended-tip technology delivers the increased airflow of a larger compressor wheel with the lower mass of a smaller, low-inertia wheel * Next generation Forged Milled Compressor Wheels (FMW Technology) * 360 thrust bearings for increased reliability at higher turbo pressure ratios * Serviceable twin hydrodynamic journal bearings
( 20 )
$1,183.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
