Availability
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$1,047.95
On Sale
Designed to feed serious EFI and carbureted engines gasoline (ethanol or methanol), Aeromotive 12 Series hex drive pumps allow you to run them on your camshaft or off the back of a properly prepared dry-sump oil pump. You could also mount the pumps off the engine or in the back of the vehicle, driven by a heavy-duty cable drive. Aeromotive Atomic hex drive fuel pumps can work in high or low-pressure applications. More product features include: * Flows up to 12 gpm * 5,000-plus hp on gas, up to 2,500 hp with methanol * High-efficiency, gerotor pumping mechanism * Tough Type III hard coat anodized body * CNC-machined from 6061 T6 aircraft aluminum * Hex drive collar with 3-bolt Enderle bolt pattern * Standard male 3/8 in. hex driveshaft * 1.25 in. barb and AN-16 male inlet * ORB-12 female outlet port
Not Yet Reviewed
$1,640.30
$1,476.27
Edelbrock Performer RPM intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM aluminum intake manifold that is coated with Edelbrock's EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer RPM intake features larger plenums and runners for engines with a camshaft, exhaust, and other performance modifications. Ready for a change? Try these Edelbrock Performer RPM intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 4 )
$1,015.95
—
$1,396.95
These Edelbrock Victor Jr. LS1 carbureted intake manifold packages are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. They include an electronic timing control module that picks up MAP, crank position, and cam position in order to drive the stock coil-on-plug ignition system.
( 1 )
$1,077.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$1,070.95
These Race Series carbs from Proform are loaded with features, such as: * High-performance Race-Series, hand assembled in the U.S. * Utilizes the Proform carburetor high-flow main body * Adjustable, screw-in air bleeds and high-performance down-leg boosters * Maximum air flow: no air horn, choke tower, or choke control * Centered on Proform billet throttle base plate * Adjustable secondary air flow cam bracket and welded throttle shaft * Button torx head throttle plate screws * Power valve blow out protection and slip link mechanical secondary linkage * Assembled with Proform billet metering blocks * Changeable idle feed restriction
( 17 )
$1,001.95
—
$1,006.95
On Sale
Holley EFI Dominator throttle bodies are the ultimate air valves for your hotrod's powerplant. These billet aluminum 2,550 cfm throttle bodies are loaded with features that will make them at home on even the largest displacement engines. They showcase roller bearing throttle shafts for ultra-smooth throttle action, non-contact magnetic throttle position sensors (TPS) sensors, and index-able throttle levers. Their lightweight construction also features dual throttle blades for maximum airflow and they are available with and without supplemental injector provisions (four injectors per throttle body and rails). Want to maximize your engine's power? Whether you have a turbo, supercharger, or a big cam engine pumping massive gulps of air, Holley EFI Dominator-flange throttle bodies will make the most of your fuel injection.
Not Yet Reviewed
$2,199.95
$1,429.95
APR offers high-pressure fuel pump rebuild kits for a variety of applications, including Audi and Volkswagen models. The high-pressure fuel pump (HPFP) increases maximum volume of fuel the HPFP can deliver by 41 percent over stock! In doing so, the direct injection fueling system is capable of satisfying fueling requirements set forth by high-horsepower setups. This is accomplished by increasing the displacement of the pump using high quality components to exacting tolerances. * How the direct injection system works: A low-pressure fuel pump (LPFP) in the fuel tank delivers fuel to the high-pressure fuel pump (HPFP) at roughly 4 to 6 bar. Fuel pressure is then bumped up to a maximum of 110-130 bar, depending on factory parts, with the HPFP. Finally, high-pressure fuel is delivered to the injectors, which spray directly into the cylinders. * The problem: The volume of fuel the HPFP pump can displace is directly tied to the displacement of the pump (internal bore size, and cam shaft dictated stroke), and engine speed. The pump is driven off of a 3-lobe camshaft, and as such, the pump cycles at 1.5 times the engine speed. Even the factory K03 and K04 turbochargers are capable of taxing this system, especially in the mid to lower RPM range where fuel volume is lower. * The APR solution: APR dramatically increases the volume of fuel the HPFP can displace at every RPM by increasing the displacement of the HPFP. This is accomplished by increasing the bore diameter of the pump's internal pressurizing cylinder. It's important to understand, despite the name, an HPFP upgrade is not necessarily designed to increase the engine's fuel rail pressure. The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations! * High quality components and extreme tolerances: The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004 in. and geometric tolerances are as tight as .00005 in. The plunger and barrel are created from certified and heat-treated bearing-grade stainless steel, and the plunger undergoes a special diamond-like coating process for exceptional surface hardness and ultra-reliable operation. To prevent float associated with altering the plunger's mass, APR supplies each unit with a properly specified spring. All internal seals are replaced, including the spring seal, and the tip of the pump retains the factory pivoting head to reduce cam follower wear and piston side loading. This kit is a rebuild of your factory pump. A working pump must be sent to APR. Pump rebuilds are applicable to the 1.4T EA111, 2.0T EA113, 3.2L FSI V6, 3.6L FSI V6, 4.2L FSI V8, 5.2L FSI V10 (S6/S8), MazdaSpeed 3 (07-13), and MazdaSpeed 6 (06-07). Additional product details: * Dramatically increases the volume of fuel displaced by the HPFP by 41 percent * Maintains higher pressures under demanding situations * Fully rebuilt in house * Fully machine tested and broken in before shipping * Rebuilds your factory pump * Upgraded and weight-matched spring * DLC coated piston * Heat-treated bearing-grade stainless steel material * Supports big power * Spring seals replaced
Not Yet Reviewed
$1,699.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
