Free Shipping on Orders Over $125 at Summit Racing

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$1,075.99

—

$1,352.99

The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI Wiring Harnesses

The Detail Zone puts you in control of your Ford wiring job with their Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses. Your 4.6 or 5.4 V8 Modular-powered ride will run like factory with these TDZ fully functional, closed-loop, fully scannable wiring systems. Installation starts with the Telorvek panels--your centrally located link between your engine sensors and computer. Detail Zone supplies all of the correct and necessary connections, terminals, and 20 ft. of fire-resistant wire--no predetermined wire lengths! Not only will you have plenty of length, but all wires are printed with sensor and terminal information, so there's no guessing which is which or where it goes! You'll have no more long hours spent tracing circuits, cutting, or soldering. The Telorvek panel is capable of being used as a breakout box required for diagnostic procedures to take voltage readings of different circuits. Take control of your project for a guess-free install and a trouble-free start-up with The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses.

5.0 out of 5 stars ( 3 )

$1,131.85

—

$1,283.75

The Detail Zone Telorvek Ford 3.5 Ecoboost EFI Wiring Harnesses

Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek Ford 3.5 Ecoboost EFI wiring harnesses come with all the sensor connections pre-installed on color-coded and printed wire which attaches to the engine and transmission using the factory ECM. These harnesses support manual and 6R80 automatic transmissions and come with detailed instructions as well as tech support. Please note: In 1996, Ford began installing Passive Anti-Theft Systems (PATS) in their ECMs. Short of installing all the components and sensors from the donor vehicle, the only way to defeat PATS is through an ECM reprogramming (sold separately).

Not Yet Reviewed

$1,283.75

The Detail Zone Telorvek Ford 5.0 EFI Wiring Harnesses

The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses are for 5.0s. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. Detail Zone systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! And since they're printed with sensor and terminal information, there's no guessing or hours spent trying to figure out where they go! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to Telorvek panel, which then connects to the ECM. Complete closed loop systems allow your engine to run like the factory units. Diagnostic scan tool connections and MIL circuits are included, and you can also use the panel as a breakout box to take the voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses.

5.0 out of 5 stars ( 1 )

$1,131.85

The Detail Zone Telorvek GM LS Vortec EFI Wiring Harnesses

Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek GM LS Vortec EFI wiring harnesses give you full control over your wiring job. Designed for coil-on-plug based LS-1 iron block engines found in most Chevy and GM trucks and SUVs, the kits include the correct, new GM connectors as required, along with crosslink, fire-resistant wire. Each kit has 20 ft. of wire for each sensor allowing you to cut to the proper length, and the wires are color-coded and printed with the sensor and terminal they connect to. Telorvek systems are fully functional, closed loop system, which allows the engine to run like factory. Due to the complex anti-theft found in these computers, your ECM will need reprogrammed. The Detail Zone can provide a host of other services on the ECM, including removing all the emissions. Key features: * Telorvek panel is stainless steel construction * High-quality SAE relays and connectors * Color-coded and labeled wires * Simple, straightforward instructions * Sensor connections pre-installed * ECU reprogramming available (sold separately) * Perfect for engine swaps, hot rod, GM vehicles, and track cars

Not Yet Reviewed

$1,131.85

Dorman Remanufactured Powertrain Control Modules

Dorman's remanufactured powertrain control modules offer original equipment performance for less than the cost of a new ECM from the dealer. The engine control module processes inputs from various sensors to control the engine's ignition and fueling for optimum performance and efficiency. Each ECM is quality-remanufactured and has been fully tested to ensure durability and functionality, including hot and cold chamber testing to meet original equipment performance. Order the module for your application.

4.25 out of 5 stars ( 4 )

$1,153.99

The Detail Zone Telorvek Ford 5.0 Coyote EFI Wiring Harnesses

The Detail Zone Telorvek Ford 5.0 Coyote EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and will support manual and 6R80 automatic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.

Not Yet Reviewed

$1,283.75

—

$1,309.95

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$1,203.99

—

$1,349.99

Zumbrota Remanufactured Axle Assemblies

Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.

4.0 out of 5 stars ( 9 )

$1,026.99

—

$1,495.99

Cooling Components Brushless Fans

Cooling Components fan portfolio covers a wide range of applications, allowing you to purchase the perfect fan and shroud match for your radiator application. The cooling fans can be applied in any high performance car and can be trimmed to fit, making them ideal for fabricators and especially Street Rods and Street Machine creators. Cooling Components brushless fans are strong, quiet, and efficient. Available in different sizes of single or dual fan units, they feature a SPAL 7-blade 14 in. fan or two SPAL 12 in. fans, along with the longer life of a brushless motor. Choose the cooling setup best suited to your hot rod or muscle car.

Not Yet Reviewed

$1,089.00

—

$1,144.00

Billet Specialties Redline LT Series Drag Pack Black Beadlock Wheels

Billet Specialties Redline LT Series Drag Pack wheels offer performance, ease of installation, and lighter weight for your truck. Featuring 6061 T-6 forged aluminum construction, they offer the ultimate upgrade over heavy factory wheels. Billet Specialties Redline LT black beadlock wheels deliver modern style and performance with a multi-spoke pattern highlighted by a black powdercoated face and outer rim with machine-finished windows and recesses. They are topped with a black anodized beadlock ring, and the back of the wheel is powdercoated black. Available in several sizes, select the diameter and fitment specs ideal for your truck.

Not Yet Reviewed

$1,139.99

Fuel Off-Road Grin FF109 Gloss Black Wheels with Milled Accents

Fuel Off-Road Grin FF109 gloss black wheels feature a mesh-like face with multiple branching split-spokes that contain intricate milling to add depth to the design. The face sits deep within the lip of the wheel to emphasize the aggressive stance and offset. Deep lips and large diameters are what Fuel Off-Road specializes in, and the FF109 Grin puts those features on display. These one-piece forged monoblock aluminum wheels are available in a wide range of widths, diameters, bolt patterns, and other fitment options.

Not Yet Reviewed

$1,082.99

Billet Specialties Street Lite Monoblock Drag Pack Polished Single Beadlock Wheels

Billet Specialties Street Lite Monoblock Drag Pack polished single beadlock wheels have evolved. The one-piece Street Lite monoblock 6061-T6 aluminum forging includes knurling at the bead seat for the maximum bead to rim interface, reducing tire spin. Recessed bolt pads are a standard feature for reduced weight. Single beadlock wheels feature aggressive knurling on the bead locks for optimal tire bead grip. Recessed bolt pads are still a standard feature for reduced weight. These beautiful wheels feature five tapered spokes with center channels—and a black anodized functional beadlock ring. They're available in a variety of bolt patterns and other fitment options.

Not Yet Reviewed

$1,293.00

Billet Specialties Redline Series Single Beadlock Polished Wheels

Billet Specialties Race Series wheels feature aggressive styling with a machined recessed bolt pad for additional weight savings. This unique feature along with the optimized design of the spokes saves nearly a pound off the weight of similar wheels. They are available in standard and beadlock styles. Billet Specialties Redline single beadlock polished race wheels rev your ride's attitude to the max, offering modern looks packed with performance. Forged aluminum centers, precision spun barrels, and a unique multi-spoke pattern topped with a scalloped billet aluminum beadlock, Redline wheels are ready to take on the competition. Select the size and fitment ideal for your vehicle. Key features: * Forged 6061 T-6 center for strength and lightweight * Spun aluminum rim for superior strength and trueness * Recessed bolt pad for additional weight savings * Tested to SAE J2530 certified for your safety * Polished center with raw machine finished windows and recess * Polished outer face rim * Back of the wheel is a raw machine finish * Black anodized bead lock ring

Not Yet Reviewed

$1,293.00

Billet Specialties Win Lite Drag Pack Polished Beadlock Wheels

Billet Specialties Drag Pack wheels for modern muscle cars offer performance, ease of installation, and reduced weight for your vehicle. Offered in vehicle-specific fitments, these one-piece monoblock wheels are forged from 6061 T-6 aluminum, accept conical seat lugs, have recessed bolt pads, and provide caliper clearance to fit around today's large factory brakes. Billet Specialties Win Lite Drag Pack polished beadlock wheels are the ultimate upgrade over the heavy factory wheels. Providing lightweight strength, they also have style with a split 5-spoke horseshoe pattern featuring a beautifully polished face and outer rim highlighted by machine-finished windows and recesses and topped with a black anodized billet ring. Select the Win Lite Drag Pack wheels designed for your muscle car. Notes: * Rear wheel sizes are SFI 15.1 certified * Knurled bead seat reduced tire slippage

Not Yet Reviewed

$1,293.00

Billet Specialties Redline Series Drag Pack Single Beadlock Black Wheels

Billet Specialties Redline Series Drag Pack wheels offer performance, ease of installation, and lighter weight for your modern muscle car. Featuring 6061 T-6 forged aluminum construction, they offer the ultimate upgrade over heavy factory wheels. Billet Specialties Redline black beadlock wheels bring modern style and performance to your car with a multi-spoke pattern highlighted by a black powdercoated face and outer rim with raw machine finished windows and recesses. They are topped with a black anodized beadlock ring, and the back of the wheel has a black powdercoat finish. Forging profiles for larger brake applications and exact fitments for today's muscle cars are available. Select the diameter and fitment specs ideal for your vehicle. Additional features: * Knurled rims eliminate tire slippage * Recessed bolt pad additional weight savings * Accepts conical seat lugs

Not Yet Reviewed

$1,342.99

Billet Specialties Redline Series Drag Pack Single Beadlock Polished Wheels

Billet Specialties Redline Series Drag Pack wheels offer performance, ease of installation, and lighter weight for your modern muscle car. Featuring 6061 T-6 forged aluminum construction, they offer the ultimate upgrade over heavy factory wheels. Billet Specialties Redline polished beadlock wheels bring modern style and performance to your car with a multi-spoke pattern highlighted by a polished face and outer rim with raw machine finished windows and recesses. They are topped with a black anodized beadlock ring, and the back of the wheel has a raw machined finish. Forging profiles for larger brake applications and exact fitments for today's muscle cars are available. Select the diameter and fitment specs ideal for your vehicle. Additional features: * Knurled rims eliminate tire slippage * Recessed bolt pad additional weight savings * Accepts conical seat lug

Not Yet Reviewed

$1,293.00

17 Results Found For "sensor"