Free Shipping on Orders Over $125 at Summit Racing

Griffin Exact Fit Radiator Combos

Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.

4.03 out of 5 stars ( 96 )

$1,310.00

On Sale

Summit Racing™ LS Turbocharger Manifold and Crossover Kits

Summit Racing™ LS Turbocharger Manifold and Crossover kits provide premium components and accessories, carefully matched, to successfully reach your power and performance target. These kits use either Hooker or Summit Turbo manifolds and crossovers to allow you to mount a T-4 turbine sized turbo on your LS based engine. The kits include premium manifolds, gaskets, and hardware. Check out Kit/Combo contents tab for the components list.

Not Yet Reviewed

$1,171.88

—

$1,238.88

DeWitts Dual 11 in. Brushless Fan Kits

DeWitts dual 11 in. brushless fan kits were a result of a collaboration between DeWitts and Spal USA. Featuring a sleek, computer-designed ballistic injection molded shroud and two Spal Plus Series brushless fans, these systems move a combined 2,884 CFM, making them ideal for extreme performance demands and high-heat environments. They are direct-fit replacements for Spal dual brushed fan kits, sharing the same bolt pattern for quick and easy installation. Spal brushless fans were developed and designed with cutting-edge technology, high-energy ferrite magnets, and a state-of-the-art sine wave sensor-less drive. These motors reach more than 82 percent electrical efficiency, placing the 300-watt power range products among the most efficient motors anywhere. The result is high air-side performance at minimum electrical load. The brushless motor is fully sealed to be IP68 and IP6K9K compliant (water and dust proof) and can operate in the presence of many aggressive or hazardous substances. Each DeWitts kit includes everything needed: fan, harness, jumper, temperature sensor, and flaps. Additional features: * Quiet pulse-modulated variable speed operation * Fits any crossflow radiator with mounting tabs * Wiring requires no harness or computer modifications * Low amp draw soft start technology with 175 degrees on and variable to 205 degrees full speed

Not Yet Reviewed

$1,499.99

Callies Compstar Connecting Rods

Better by design, Callies Compstar connecting rods offer high performance and a trouble-free engine build. Concerns about out-of-round, big-end bore sizing, repeatability, time-saving details, and upgrade costs are a thing of the past. Their forged 4340 steel rods are put through a lengthy stress-relief process and burnishing of threads and bolt spot faces to ensure dimensional repeatability, no matter how many times rods are torn down and reassembled. Pin bushings are chamfered and honed, parting line edges are generously chamfered, and bearing locating tab slots are deburred, all in an effort to save you time and trouble. ARP 2000 bolts and stroker clearances are standard with Compstar rods. Choose either their original H-beam design or heavy-duty I-beam designed rods. For high performance use right out of the box, plus value and peace of mind, try Callies Compstar connecting rods.

4.85 out of 5 stars ( 20 )

$1,120.00

RC Components Hammer Eclipse Prism Gloss Black Wheels

The days of boring SFI 15.2 race wheels are over! RC Components Hammer Eclipse Prism gloss black front race wheels are one-piece forged from 6061 T-6 aluminum for strength and trueness. These stylish 10-spoke rims have oblong windows, accents transitioning to the outer rim edge, and rank among the lightest wheels in the industry. The rear race wheels use tabs to interlock the 6061T-6 forged centers in place, putting the majority of the torque on the middle section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum inner nubby beadlock rings. With black anodized and polished aluminum finishes, incredible materials, and a wicked race car, RC Components Hammer Eclipse Prism gloss black wheels are sure to please.

Not Yet Reviewed

$1,015.00

—

$1,135.00

Peterson Fluid Systems R4 Oil Pumps

Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section

4.5 out of 5 stars ( 2 )

$1,099.99

—

$1,499.99

All-Pro Off-Road APEX Front Bumpers

All-Pro Off-Road APEX front bumpers are designed to meet your demands for durable, low-profile bumpers that look as good as they function. These All-Pro Expedition bumpers, dubbed APEX for short, are available in lightweight aluminum and steel versions with hoop options for multiple lighting configurations. All-Pro Off-Road APEX front bumpers ready your rig with rugged armor and appeal that will illuminate any excursion you undertake. Features and options may include: * CNC laser-cut, brake-formed, and MIG-welded 1/4 in. thick aluminum plate or 3/16 in. steel plate * Two beefy 1 in. thick recovery points made from 1.5 in. x .250 wall tubing welded to thick plates * Two 4 in. light mounts are built-in * Ideal for trucks running 35 in. or larger tires and requiring winch and light mounts * Integrated recover points * Ships bare steel or aluminum * Includes mounting hardware and lower valance * Aluminum is almost 50 percent lighter than steel version * Improved approach angle and ground clearance * Optional LED hoop gives space to mount a small light bar * Optional center hoop is tall enough to offer grille protection, as well as providing two additional light mount tabs * Optional full hoops option includes the center hoop and headlight hoops for the highest level of protection (not available for all versions) * Heavy-duty winch mounting (not available for all versions) * Lower valance (not available for all versions) * All-Pro IFS skid plates attach directly to these bumpers

3.5 out of 5 stars ( 2 )

$1,299.99

—

$1,499.99

QA1 HD Pro Rear Drag 4-Link Systems

QA1 HD Pro rear drag 4-link kits are built to put down serious power! Streamlining the fabrication process, these systems deliver professional-grade results and performance in a convenient, easy-to-order kit. They are designed for the hardcore, discerning, do-it-yourself racer looking for a no-compromise solution to take their vehicle to the next level in performance and adjustability. Offered with or without QA1's MOD Series 4-way adjustable coilover shocks, or 7 in. travel, track-proven single or double adjustable coilover shocks, each kit contains high-quality, MIG-weldable components to ensure a safe and properly engineered design that can be easily adapted into many drag racing setups. A components kit is also offered without coilover shocks and lateral locating device. Find convenience, safety, and performance all in a QA1 HD Pro rear drag 4-link system. Select the kit best suited to your drag race suspension setup. Features, benefits, and contents: * Drag race-style 4-link design: -- Performance and adjustability -- Wide range of instant center tuning and on-car adjustability -- Components can be cut to length -- 40 in. or narrower frame rails * 1/4 in. thick plates * 1 1/4 in. diameter, 22 in. length trailing arm tubes * Grade 8 hardware * QA1 chromoly rod ends * 40 in. shock crossmember and mounting tabs * 40 in. diagonal link kit with mounting brackets (not in components kit)

Not Yet Reviewed

$1,323.95

Auto Metal Direct Quarter Panels

Damaged or rusted quarter panels often need to be cut off and replaced. Auto Metal Direct quarter panels are manufactured from high-quality, proper gauge steel on AMD tooling for an authentic original appearance and precision fit. Each time a prototype body panel comes off new tooling, AMD test fits it on a car. The marked-up prototype is then used to change and improve the tools. The result is correct-as-original body lines, braces, marker light holes, clips, tabs, flanges, seams, and antenna cut-outs. All AMD quarter panels feature a black EDT finish for rust prevention and will require standard prep work prior to painting. Whether you're doing restoration work or rust repairs, Auto Metal Direct quarter panels will make your ride like new again.

4.25 out of 5 stars ( 128 )

$1,209.99

DV8 Offroad Ram 1500 Spec Series Front Bumpers

DV8 Offroad designed these Spec Series front bumpers to bring style and utility to your 2019+ Ram 1500, all while improving ground clearance without the need for cutting or drilling. At the center of the bumper is a recessed mount for provisions to add a 20 in. LED light bar (options include the Elite Series single or dual-row light bar, the Rigid 20 in. light bar, Baja Designs 20 in. light bar, as well as other brands). Welded zip-tie tabs allow for clean light or sensor wiring management behind the bumper. Recovery options are included with 1 in. thick D-ring shackle mounts, and a hidden winch mount. This Ram 1500 full-width front bumper also features a micro-textured black powdercoat and satin black aluminum mesh accent panels. In addition, this Ram 1500 Spec Series front bumper from DV8 Offroad also features a fully bolt-on installation. Key features: * Steel construction * Micro-textured black powdercoat finish * Aluminum mesh accent panels in satin black * Hidden winch mount (winch not included) * This bumper model retains Factory parking sensors * Welded-in zip-tie tabs for wire management * Mounting provisions to integrate additional lighting accessories such as a light bar (light bar sold separately) * Mounting provisions for two 3 in. pod light (light pods not included) * Pair of 1 in. thick D-ring mounts * Bolt-on installation * This bumper allows the option to add a skid plate (sold separately) Important Note: Bumper NOT compatible with diesel engine models, the Ram Rebel, or the 2019 Classic model. This bumper is not compatible with roller fairleads. DV8 Offroad advises using an iron/steel hawse style fairlead if running a steel cable winch.

Not Yet Reviewed

$1,249.99

Artec Industries Toyota Tacoma 3G Venture Series Rear Bumpers

Get ready for the toughest challenges with Artec Industries Toyota Tacoma 3G Venture heavy-duty rear bumpers that provide extra skid plate protection. They replace the factory rear bumper of your 3rd generation Toyota Tacoma, utilizing a high-clearance design that hugs the frame, providing a better departure angle. Artec Venture rear bumpers are available in two finishes, select between bare steel or black textured powdercoat. Additional features: * CNC machined steel components * Engineered using 3-D scan files * Skid plates are made from aluminum and protect factory backup sensors * Countersunk skid hardware prevents bolts getting hung up on rocks * 3/4 in. thick recovery tabs located higher for better ground clearance * Integrates with factory hitch and includes LED license plate lights * Includes slotted step plate for grip and large frame plate gussets * Easy installation with press nuts included

Not Yet Reviewed

$1,237.49

Westin Sportsman Grille Guards

Westin Sportsman grille guards improve your truck or SUV's looks while protecting its front-end during your favorite outdoor adventures. Fully welded, heavy-duty steel uprights mount to the vehicle's frame for superior strength, and rubber extrusions prevent metal-to-metal contact between the bumper and the guard. Tough 1 1/2 in. diameter steel tubing follows the contours around the grille and headlight area for superior protection, while a welded hood guard helps to shield the hood from damage. Other notable features include auxiliary-light mounting tabs, removable light guards for easy headlamp access, and polished or black powdercoat finish for long-lasting good looks and corrosion protection. Order the model recommended for your vehicle.

4.9 out of 5 stars ( 10 )

$1,006.99

RC Components Hammer-S Eclipse Prism Gloss Black Wheels

RC Components Hammer-S Eclipse Prism gloss black wheels combine showmanship and strong but lightweight components for SFI 15.2 performance. The front race wheels are one-piece forged from 6061 T-6 aluminum. The rims and spoke faces are gloss black anodized, while the milled spoke edges are polished for long-lasting protection. The rear race wheels use tabs to interlock the 6061 T-6 forged centers in place, putting the majority of the torque on the middle section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum beadlock rings. Look like a winner with RC Components Hammer-S Eclipse Prism gloss black wheels.

Not Yet Reviewed

$1,070.00

DV8 Offroad Chevy Silverado 1500 Spec Series Front Bumpers

DV8's Chevy Silverado 1500 Spec Series front bumpers feature a low-profile design for improved clearance when navigating technical trails. The hidden winch mount and pair of D-ring mounts provide vehicle recovery options. For enhanced lighting capabilities, the front bumpers have a 20-inch single/dual row light bar mount behind Spec Series accent panels and also provide two pod light mounts in the wings. For undercarriage protection, the bumper features a front skid plate that shields the area between the bumper and front cross member. The Chevy Silverado front bumpers are made from heavy-duty steel and finished in a resilient micro-textured black powdercoat with satin black accent panels that enhance your truck's sleek exterior. The bumper is compatible with OEM parking sensors, front camera, and adaptive cruise control. The install process is straightforward, and the integrated zip tie tabs allow for clean wire management. Improve your rig's off-road utility while hitting the trail in style with the Spec Series front bumper by DV8. Key features: * Heavy-duty 3.5/5mm steel construction * Micro-textured black powdercoat finish * Satin black powdercoated accent panels * Low-profile fitment * Hidden standard winch mount (winch sold separately) * Mounting provisions to integrate additional lighting accessories such as a 20 in. single or a dual-row light bar (light bar sold separately) * Mounting provisions for two 3 in. pod light (light pods not included) * Pair of 1 in. thick D-ring mounts * Included front skid plate * Bumper is designed to retains Factory parking sensors and front camera * Bumper is designed to retain Adaptive Cruise Control * Welded-in zip-tie tabs for wire management Please Note: The bumper is not compatible with the ZR2 trim level, and it will not work with roller style fairleads. The bumper is not compatible with the factory fog lights. NOT compatible with 2.7L TurboMax high output engines, Diesel engine models, or vehicles equipped with Super Cruise. Minor cutting is required for installation.

Not Yet Reviewed

$1,199.99

RC Components Hammer Polished Wheels

RC Components Hammer polished wheels are great for blinding your opponents and bringing extra attention to your race car. They have oblong windows in each of their five spokes, are available in a variety of offsets, and are SFI 15.2 certified. Front race wheels are one-piece forged from 6061 T-6 aluminum for strength and trueness and rank among the lightest wheels in the industry. The rear race wheels use tabs to interlock the 6061 T-6 forged centers in place, putting the majority of the torque on the center section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum inner nubby beadlock rings. For amazing strength, reduced unsprung weight, and extra shine, install RC Components Hammer polished wheels.

5.0 out of 5 stars ( 1 )

$1,380.00

Johnson's Hot Rod Shop Front Radius Rods

Johnson's Hot Rod Shop front radius rods feature modern, vintage-styled designs that take the age-old design of split wishbones to new heights. These radius arms fit OE and aftermarket Ford-style I-beam axles with a standard 2.25 in. perch boss. Manufactured from T6061 aluminum and available in machined or show-polished finishes, they measure 33.25 in. center-to-center with the correct caster angle built-in. Johnson's front radius rods are sold in kits and come complete with two radius rods, hardware, and frame tabs to attach to the frame rails. A variety of distinct styles are available, along with optional matching rear ladder bars (sold separately). All deliver superior strength and clean lines for your hotrod. For custom applications, please call to inquire about lengths and styles.

5.0 out of 5 stars ( 2 )

$1,295.00

—

$1,395.00

Auto Metal Direct Grilles

Auto Metal Direct grilles are made out of high-quality materials and feature OE-quality finishes. All parts feature (depending on the application) correct-as-original clips, tabs, bends, and seams. Unlike other restoration grilles, these are precision-crafted and manufactured, creating a product that looks great and fits even better. Auto Metal Direct provides you with a fast and easy installation, as all parts are designed to be a direct bolt-on, utilizing OE brackets and hardware. Restore your classic to its former glory with Auto Metal Direct grilles.

3.67 out of 5 stars ( 3 )

$1,105.99

ARB Tire Carriers

ARB tire carriers are bolt-on additions for their bumpers, and a rattle-free solution for your oversized tires. Plus, these carriers include an integrated jack mount, which easily doubles as a step when a jack is not installed. They also are equipped with additional universal light tabs above the third brake light where reverse lighting or a CB antenna can be mounted. ARB tire carriers feature: * Accommodates up to a 40 in. tire * CNC-machined pivot * Includes mounts for additional lighting * Jack mount doubles as a step * Durable Integrit black powdercoat finish

Not Yet Reviewed

$1,195.95

Extreme Metal Products Snow Plow Kits

Extreme Metal Products snow plow kits are fabricated from superior-quality A36 American steel for long-lasting durability, laser-cut to ensure a perfect fit, MIG welded, and powdercoated for superior protection against rust and corrosion. EMP plow systems feature manual angle adjustment (left, right, center positions) and a 4 in. high wear blade made from AR plate (Abrasion Resistant Steel). Plow parts are fabricated with the tab and slot method, meaning the parts fit together like a puzzle before welding, ensuring a perfect fit every time. Extreme Metal Products snow plow kits mount to the front and underside of your UTV with the supplied hardware. The mount can easily be removed at the end of the season with six bolts and the plow attaches in less than a minute with the supplied hitch pins. Need to push the snow out of your way? Enlist your UTV for the job … after you fit it with an Extreme Metal Products snow plow kit. Specs, benefits, and parts included: * Plow blade is 20 in. high and 72 in. wide * Plow frame is made from 1/4 in. and 3/8 in. thick steel * Attaches in less than a minute with two hitch pins * Mold boards are made from 14-gauge steel with 1/4 in. thick laser-cut braces * Plow raises and lowers with your winch * Mounting plate for your specific UTV * Plow shoes

Not Yet Reviewed

$1,223.99

Smittybilt Defender Roof Racks

Smittybilt Defender roof racks are the flagship of the Smittybilt line. They are made of 16-gauge, fully welded, 1 in. round steel tubing and are finished in a durable black textured powdercoat. They have two rear welded tabs and integrated flooring to maximize their functionality. They have multiple mounting options to offer a secure fit to any vehicle. Last but not least, Smittybilt has put it in the forefront of the Defender roof racks' design to have ease of installation for the everyday do-it-yourselfer.

Not Yet Reviewed

$1,249.99

Air Lift Performance Series Air Suspension Kits

Air Lift Performance Series air suspension kits offer 30 levels of awesome adjustability, giving you the ability to comfortably drive your car daily, slam it to the ground for a show-winning stance, or tear up your favorite racetrack--all with the touch of a button and twist of a knob. Performance Series options include lightweight monotube shocks or struts, with many of them offering up to 3 in. of threaded adjustability, allowing you to set the desired length for additional lift if you want more ground clearance or that perfect slammed position. This flexibility enables you to tune the suspension to match your needs without sacrificing precious stroke. Also, the monotube internals run cooler, are more sensitive, and weigh less than twin-tube models. Most Air Lift Performance air suspension kits require no modifications for installation. Every upper and lower mount is designed to facilitate an exact fit to your vehicle, and kits always include tabs and brackets for brake lines and ABS wiring, just like OEM. Everything needed to install is included (even specialized hardware), ensuring the best fit, the highest performance, and the lowest ride. Get your vehicle down with the versatility of Air Lift Performance Series kits. Order the kit(s) designed for your vehicle.

Not Yet Reviewed

$1,020.00

—

$1,259.99

DV8 Offroad Spec Series Bumpers

Step up your off-road game with DV8's Spec Series line of bumpers. Available for front and rear, they have everything you need for accessing tough terrain, along with a stylish, dynamic look. Engineered for aggressive rock crawling, DV8 Offroad Spec Series bumpers have a high-clearance design that allow you to conquer obstacles and hazards off the beaten path. The front bumpers have a removable winch plate that perfectly aligns with most full size winches, so you can make quick work of any recovery job on the trail. They are also designed with a bull bar for added protection and several provisions for to add different lighting options. The rear bumper has clevis mounts for 3/4 in. D-ring shackles and provisions for mounting light pods for supplemental trail lighting. The rear bumpers also include a license plate relocation bracket and plate light. Both front and rear bumpers are direct-fit, bolt-ons with welded in zip tie tabs for clean wire management, a micro-texture black powdercoat, and satin black accent plates for added style. Transform your Jeep into a rugged, unstoppable off-road machine with the assistance of DV8 Spec Series bumpers.

Not Yet Reviewed

$1,199.99

—

$1,299.99

Heidts Triangular 4-Link Kits

The triangle is one of the strongest shapes, and Heidts triangular 4-link kits are built strong to keep your axle properly centered. Designed for your American muscle Chevy, these popular triangulated 4-link kits do not require a panhard rod, and the bars are fully adjustable for suspension tuning. These 4-link base kits include a 1 1/4 in. x .156 tube with 3/4 in. stainless adjusters and urethane bushings, angled and straight chassis brackets, tabs, hardware and a top crossmember. Get added strength and better handling performance when you bolt-on Heidts triangular 4-link kits.

Not Yet Reviewed

$1,031.00

LoD Offroad Destroyer Series Bumpers

LoD Offroad Destroyer bumpers are available for front or rear of your Jeep, and rear of your Bronco in shorty to full-width versions. Many of the front bumpers are winch-ready and offered with or without a bull bar or stinger guard, while the rear Destroyers are light-ready and will include blank bezels to fill in the light housing cavities. Engineered to a higher level, LoD Offroad Destroyer bumpers deliver a stealthy look and versatile functionality, while protecting and enhancing your off-road vehicle on the trail. They are fabricated with high-strength, lightweight military grade steel and finished with a durable powdercoat finish. And with the increased range of optional equipment available, you can customize your Destroyer to fit your needs. Better look, higher quality, and more options; choose the Destroyer bumper designed for your vehicle. Notes: * Destroyer front bumpers with bull bars have standard light bar tabs design to fit additional individual lights or a light bar up to 10 in. long. The tabs are located behind the guard tubing and are not visible from a direct front view. * Destroyer rear bumpers will work with the factory tire carrier and fits up to a 35 in. (Jeep) 37 in. (Bronco) tire comfortably. The tow hitch receiver is built into the rear bumper and is tow rated the same as the factory. Bronco rear Destroyer is also available with LoD tire carrier.

Not Yet Reviewed

$1,048.50

93 Results Found For "tab"