Availability
Showing In Stock Items. Show All 153 Items.
Wilwood DynaPro Radial Big Brake front hub kits are specifically engineered for the 1964-67 Sunbeam Tiger. Maintaining full compatibility with the OE spindle, these Wilwood DynaPro Big Brake kits offer forged billet narrow 4-piston calipers, large diameter rotors, and forged aluminum 4-bolt hubs and hats for this specific group of rear-wheel drive sport compacts. With optional caliper finishes and rotor designs, these kits are the perfect complements to your wheel, tire, and suspension upgrades. Personalize the style and optimize the brake performance of your Tiger with Wilwood DynaPro Radial Big Brake front hub kits.
( 7 )
$1,245.25
—
$1,382.75
Lifeline Zero 2020 Fire Marshal fire suppression systems are smaller and lighter than previous designs and offer an increased level of safety utilizing a water-based foam that delivers the fastest heat absorption and knock-down capability. Available in both mechanically activated and electrical-type systems, each is supplied with a comprehensive installation kit utilizing five strategically placed nozzles—three in the engine bay and two in the cockpit, delivering full protection for the engine bay and maximum protection for the driver. Lifeline Zero 2020 Fire Marshal fire suppression systems are FIA Technical List 16 compliant and covers a wide range of vehicles from Saloon and sports cars to Rally and single seaters.
( 6 )
$1,059.99
Wilwood combination parking brake kits provide the correct balanced brake performance, plus matching style to complement front big brake upgrade kits. These packages combine hydro-mechanical parking brake calipers using hydraulic pressure from the master cylinder for stopping power, and an internal mechanical lock within the caliper for a parking brake. Wilwood couples the calipers to 11 in., one-piece rotor assemblies with integral hats and high-friction BP-10 compound pads. These combination parking brake kits are ideal for select rear-wheel drive axles that are not well-suited for internal shoe-style parking brakes.
( 1 )
$1,122.05
Clearance
Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 20 )
$1,458.99
$1,149.50
—
$1,455.99
Classic Performance tubular control arms are designed to add up to five degrees of caster in certain applications, while providing full wheel travel. They're manufactured from 1.250 in., 0.120 in. thick wall DOM tubing, with pivot barrels made from 1.500 in., 0.188 in. thick wall DOM tubing to help eliminate distortion. These control arms use bushings made from self-lubricating, non-squeak patented material that will outlast any rubber or polyurethane bushing. The control arms are designed as bolt-in replacements for your factory originals. Classic Performance tubular control arms will tighten up your front suspension and give you that performance ride through the corners and on straight roads. Select the model and options recommended for your vehicle.
( 125 )
$1,024.99
—
$1,034.99
The Vudo helmets by Simpson are reborn with an all-new, ultra-lightweight shell that makes them the lightest helmet in their segment. Designed for the fearless, the helmets no-vent, aerodynamic profile is purpose-built for aggressive open-cockpit racing and demanding dirt track environments. Engineered and manufactured in Texas, the Vudo helmets by Simpson deliver uncompromising protection with factory-ready accessory up fitting to meet any racing setup. Their streamlined design helps reduce drag while maintaining the iconic Simpson style, giving drivers both a performance edge and a bold presence on track. Key features: * SA2025 Certified * Super lightweight * Lower Front Chin Spoiler for open cockpit cars (optional rear spoiler) * Solid front chin bar to keep dirt and debris out * Top and rear ventilation channels (optional top and left offset forced air systems) * Removable Cheek pads * Removable Top pads * Removable Gel earcups, compatible with all Simpson communication kits * Standard clear anti-scratch visor (anti-fog + anti-scratch clear visor available) * Hand built to order in New Braunfels, TX Note: This helmet is Snell SA2025-certified and is broadly accepted by race organizing bodies and tracks through 2035. Always verify safety rules with your sanctioning body. The Snell Foundation recommends replacement after five (5) years from the date of manufacture. After this period, the helmet's protective performance may diminish, and it may no longer meet safety requirements or be accepted for use in sanctioned events or competitions.
Not Yet Reviewed
$1,249.95
These Strange Pro Race steel front brake kits offer a tremendous weight savings over OEM brake components. The entire 4-piston brake kits, complete with bearings, hubs, rotors, pads, calipers, etc., weigh only 33.5 lbs. They are unsurpassed in detail, as is evident in the hub design. Each hub has one bolt circle. Instead of adding an additional bolt circle, Strange machined five large lightening holes to reduce rotating weight. The billet aluminum hub is further lightened by its scalloped design and fully machined billet aluminum hubcap.
( 28 )
$1,012.99
—
$1,294.99
Don't let a downpour of rain hinder your ability to see clearly. Detroit Speed Selecta Speed Windshield Wiper Conversion Kits provide you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your classic car. They include a low-profile, 7-speed wiper motor with five delays, low speed and high speed, a rotary switch, an adapter plate, and a wiring harness. The CNC-machined aluminum adapter plate mounts the wiper motor to the stock firewall bolt pattern, so no cutting of the firewall or body is required for the installation.
( 31 )
$1,079.95
Woodward Fab English wheels allow you to shrink, stretch, and custom-form up to 16-gauge steel with ease. These machines are for serious fabricators. Woodward Fab designed them to accommodate larger pieces—with a thread screw for height adjustments, and precision roller bearings on the upper and lower wheels. The frames are constructed from 1/4 in. thick steel tubing and have a durable painted finish. These English wheels include a painted sturdy steel base, a hardened steel upper wheel, five radiused lower anvils (2 3/8, 3, 5, 8 1/2, and 12 in.), a flat anvil, and a quick-release lever that makes lower anvil changes a snap. Select the model with throat depth and upper anvil diameter preferred for your applications.
( 2 )
$1,126.99
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$1,003.70
—
$1,439.20
On Sale
The Edge Pulsar Insight CTS3 Programmers are an advanced monitor and tuning combo that eliminates the need for ECU swaps, fuel pressure boxes and other underperforming tuning products. With simple installation, huge performance gains and the crisp insight display, this Edge Products tuner and monitor combo is all you need for the street. The Pulsar allows you to change power levels on-the-fly, without having to shut-off the vehicle and the module delivers up to 90 hp and 156 TQ and has a transmission relearn feature for the increase in power. Along with the relearn feature, the module also has transmission slip backdown to decrease power when clutch slip is detected in the transmission and allows you to recalibrate the speedometer for wheel, tire and gear changes through the Insight CTS3. The Insight CTS3 portion of this tuner/monitor combo has a sleek housing with a full-color high-resolution capacitive touch screen with haptic response. The Insight CTS3 can display power level, while monitoring rpm, boost psi, mph, gear, ECT, EGT and much more. Built-in safety features such as EGT backdown, high-idle adjustment, cold engine protection, gear change backdown, injector balance rates and much more can be monitored by the Insight. Key features of Pulsar Insight CTS3 programmers: * Wi-Fi updateable * Built-in turbo timer * Adjustable high-idle setting * Five on-the-fly adjustable power levels * Speed limiter adjustments * TPMS pressure adjustments * Enhanced throttle response with built-in throttle sensitivity control * Updates for Pulsar are managed through the Insight instead of requiring a laptop computer
Not Yet Reviewed
$1,249.95
—
$1,399.95
$1,123.95
—
$1,258.95
You asked for it, Billet Specialties made it! Carrying hardcore SFI 15.1 certification, these Street Lite single beadlock wheels are built for speed. The ultra-lightweight rims can handle the everyday street with ease, thanks to the rims' rotary-forged structure. They feature five tapered spokes with interior channels, a durable black finish with plenty of machined accents, and a functional beadlock ring--the ultimate street and strip wheels! Street Lite wheels are available in a variety of widths, diameters, bolt patterns, and other fitment options.
Not Yet Reviewed
$1,234.00
—
$1,327.99
On Sale
MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.
Not Yet Reviewed
$1,149.95
$1,033.95
—
$1,099.95
Nitrous Outlet ProMax Dual-Channel Progressive Controllers incorporate the system activation and safety functions of the WinMax—but adds numerous tuning and traction features that help you get the most out of your nitrous system. With the ProMax you can set rpm, time-based, or boost referencing progressive ramps for multiple stages while integrating wideband inputs. Additional features and benefits include: * Inputs for vehicle speed, trans-brake, MAP sensor, two wideband oxygen sensors, two nitrous pressure sensors, and one fuel pressure sensor * Two built-in 70 amp solenoid drivers can control two stages independently, or can be configured for closed-loop fuel control based on wideband oxygen input—with nitrous on one output and fuel on the second output * Progressive stage controls allow: adjustable frequency output of 10-30 Hz (by 1 Hz) for driving solenoids * Ability to be configured to vary solenoid duty cycle as a function of time, throttle percent (TPS), engine rpm, vehicle speed, manifold pressure (MAP) * Ability to set response of stage based on secondary arm switch input (arm/disarm) * Resume and restart feature option for controller—to resume an interrupted time-based ramp or start over based on TPS going out of range * Built-in rpm window switch with gear lockout feature * TPS or WOT switch activation * Data logging capable * Updateable Firmware * CAN Bus output * Two ignition retard outputs * Simple USB connection to PC/laptop * Optional 4.3 in. full touch screen display allows viewing of real-time data * Saved data logs can only be viewed on PC/laptop * Can save up to five different tuneups * Controller can be programmed via PC/laptop or optional display
Not Yet Reviewed
$1,098.99
—
$1,393.99
OTC low-profile transfer tankers with electric pump will handle drained oil--without spilling a drop! They feature fully enclosed electric motors and sit only 7 1/2 in. from the floor to the top of the 15 gallon reservoir. Draining oil from a large displacement engine and getting it to your bulk storage container is a snap with OTC transfer tankers on your team. Additional features includes: * Used oil is collected in a reservoir and then rolls smoothly on 4 in. free-wheeling casters to your storage location * Pump moves five gallons a minute through the 8 ft. transfer hose * Handle is removable for easy storage * Screen attached to reservoir allows assembly to be stored on its side * Can also be used for transferring antifreeze
Not Yet Reviewed
$1,256.99
On Sale
Edge Pulsar Duramax modules are innovative in-line tuners that have totally changed the game when it comes to adding performance and keeping the ECU on the truck. No mail-in unlocks, no cross-shipment, or hassle. Pulsar supplies instant power, on the fly, with no flash tuning. Now with carb compliant EO coverage for sale in all 50 states! Features: * EO Number D-802-9 * Change five power levels on-the-fly using +/- cruise control buttons * Connects directly to ECU in engine compartment providing instant power * Built-in throttle sensitivity control for improved throttle response * High-idle user settings to adjust rpm during idle * Transmission slip backdown power will decrease if slip is detected * EGT Backdown power will decrease if EGTs exceed set limit * Provides the ability to recalibrate the speedometer for wheel/tire changes * Simple installation with no complex wiring harness or ECU flashing required * Ships with update cable
( 1 )
$1,099.95
On Sale
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$1,399.95
RC Components Hammer polished wheels are great for blinding your opponents and bringing extra attention to your race car. They have oblong windows in each of their five spokes, are available in a variety of offsets, and are SFI 15.2 certified. Front race wheels are one-piece forged from 6061 T-6 aluminum for strength and trueness and rank among the lightest wheels in the industry. The rear race wheels use tabs to interlock the 6061 T-6 forged centers in place, putting the majority of the torque on the center section and 2-piece spun forged rims, instead of the bolts. Units are available with or without billet aluminum inner nubby beadlock rings. For amazing strength, reduced unsprung weight, and extra shine, install RC Components Hammer polished wheels.
( 1 )
$1,355.00
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,175.00
$1,057.50
Summit Bucks
If you're looking for a competitive edge on the track, the Yoshimura Race Series R-77D exhaust systems may be your ticket to the winner's circle. They're designed with nothing but power in mind. Each system is developed in accordance with noise compliance regulations imposed by most racing sanctioning bodies worldwide. Yoshimura's R-77D full system is a dual-outlet version of the race-proven R-77. The carbon fiber muffler requires no inserts or restrictions, increasing packing life and providing five percent more open exhaust outlet area—with as much as three decibels lower sound output (compared to the standard open R-77). It offers greater gains in low- and mid-range power. Order the system designed for your motorcycle application. Additional features: * Superbike technology and styling * Innovative dual-outlet carbon fiber end-cap * Trapezoidal-shaped sleeve * Large volume of packing material * Straight baffle for ample flow * Stainless steel header and tailpipe (Note: Not intended for street use; for closed-course competition only)
Not Yet Reviewed
$1,449.00
On Sale
Homak 54 in. RS Pro Series hutch cabinets feature a lockable top hutch with full-extension gas struts, grommet cutouts, and a power strip containing four electric outlets and two USB ports to store and charge phones, laptops, and other devices. The cabinets are equipped with an HMC high-security tubular locking system to keep valuables safe and secure; heavy-duty rubber grip steel handles for comfortable, easy lifting; and a durable stainless steel work surface. Additional details include: * Toolboard back wall with square pegs for hanging and organizing hand tools * Constructed from 16-gauge steel, 1.5mm thick * Bold UV protective high-gloss 3.2mil powdercoat finish for a sleek look to the overall design * Five bold color selections * Lift latch drawer pulls * Removable ball bearing slides * EVA drawer lines and top mat included * Over 20 percent more space than an 18 in. box * All drawers structurally stiffened * Heavy-duty push handle
Not Yet Reviewed
$1,199.99
$1,079.99
On Sale
Homak 72 in. RS Pro Series hutch cabinets make a great addition to an RS PRO 72 in. toolbox or an excellent upgrade from your current toolbox hutch. The lockable top hutch includes full-extension gas struts, grommet cutouts, and a power strip containing four electric outlets and two USB ports to store and charge phones, laptops, and other devices. These units are equipped with an HMC High Security Locking System to keep valuables safe and secure. They're available in five bold color options. Additional features: * Heavy-duty rubber grip steel handles for comfortable, easy lifting * Durable stainless steel work surface * Toolboard back wall with square pegs for hanging and organizing hand tools * Constructed from 16-gauge steel, 1.5mm thick * Bold UV protective high-gloss 3.2mil powdercoat finish provides a sleek look to the overall design * Lift latch drawer pulls * All drawers structurally stiffened * Removable ball bearing slides * EVA drawer liners and top mat included * Over 20 percent more space than an 18 in. box
Not Yet Reviewed
$1,599.99
$1,439.99
Essential for the more precise wheel balancing, the Ranger universal lug bolt flange kits come with five centering pin adapters to fit most cars and light trucks, imported and domestic. The specially designed lug bolt adaptors balance wheels far more accurately than a cone by itself. The result is a smooth, vibration-free drive. Includes flange plate kit and measuring caliper.
Not Yet Reviewed
$1,225.00
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 423 )
$1,144.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
