Availability
On Sale
Trail-Gear offers Trail-Creeper 2.28 crawl boxes—ready to bolt onto the front of a top shift-style, gear driven Toyota transfer case. Transfer cases are made from two basic sections, the reduction section and the 4WD section. To build a dual transfer case, two reductions boxes are bolted back-to-back with a dual case adapter. These two are then bolted to a 4WD section. Available with 21 or 23 spline input and output gears, each unit is completely rebuilt and inspected, and has a low range gear ratio of 2.28. Whether you're looking to maintain, optimize, or upgrade, choose Trail-Gear for the quality parts and kit components that you need to give you confidence while driving through even the most difficult obstacles. Important Note: Floorboard and drive shaft modifications are required for dual transfer case installation.
( 3 )
$1,299.99
$1,104.99
On Sale
Trail-Gear assembled third members are off-road strong! These units are built with all-new housings and internal parts and are delivered ready for you to drop into your axle. TG assembled third members feature top-quality ring and pinion gears, lockers, solid pinion spacers for long gear life, and they include triple-drilled flanges to cover common driveshaft patterns. The V6 units feature larger OEM-style V6 gear sets with longer pinion gear. Choose your locker style, case style, and gear ratio for off-road performance from Trail-Gear's selection of assembled third members.
( 2 )
$1,375.10
—
$1,557.68
$1,210.09
—
$1,401.91
On Sale
Trail-Gear assembled Super Finish third members are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. They include all new parts and are ready to drop into your axle with top-quality Super Finish 29-spline ring and pinion gears, and your choice of locker. The ring and pinion gears are treated with the REM Isotropic Super Finishing (ISF) process, which removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra. This means that there is less friction between the gears, reducing wear by 95 percent, and allowing the gears and bearings to run cooler and last longer. Select the ideal kit for your application. Additional features and benefits: * Fully built Super Finish 3rd members--all new parts--no used housings or internal components * 29-spline pinion spline is 7 percent larger in diameter than the 27-spline for increased strength * Available in 4.88 and 5.29 ratios for 4-cylinder, V6, and high-pinion applications * Gear teeth are cut using Gleason CNC hobbing machines and cutters * No break-in period * Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements * Dust shield pre-installed onto flange * High-pinion sets also include a high-pinion oil slinger * V6 units feature larger OEM-style V6 gear sets with a longer pinion gear * Trail-Safe pinon seal and nut included * Flange is quadruple drilled with popular Pickup/4Runner and Tacoma patterns: -- 66mm x 66mm x 11mm (Tacoma) -- 60mm x 60mm x 10mm (Pickup/4Runner and TG heavy-duty driveline) -- 60mm x 68.3mm x 10mm -- 61.5mm x 70mm x 10mm Notes: * Requires ring and pinion setup kit to complete the installation into your existing differential housing * For Toyota 8 in. solid axles only. Will not fit 7.5 in. IFS front axles.
Not Yet Reviewed
$1,491.02
—
$1,722.69
$1,268.79
—
$1,488.69
On Sale
What's better than Trail-Gear Rock Assault 9 axle housings? Rock Assault 9 with Trail-Gear's true, full-float, 35-spline axle shafts! These shafts are manufactured from heat-treated 4340 chromoly and feature a tapered design that allows for more yield during extra torque load, letting them flex without breaking. Of course, the Rock Assault 9 axle housings are complete welded assemblies from flange to flange, including the unit bearing pockets and inner housing seals. And now, these strong axle housing include the strength of their axle shafts, making it even easier to upgrade your build. Get ready to rock on with Rock Assault 9 axle housings with shafts.
( 1 )
$1,599.99
$1,359.99
On Sale
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$1,499.99
—
$1,599.99
$1,289.99
—
$1,375.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
