Availability
Nitrous Express offers several nitrous plumbing kits highlighting their selection of precision nozzles. Available with Shark, Piranha, SSV, STD, or dry nozzles, these direct port NX kits contain all of the right components to get the performance flowing in your setup. The kits include stainless steel tubing, B-nuts, sleeves, distribution blocks or hex rails, fittings, lines, and jetting. They are available with or without solenoids. Plumb your setup with nitrous kits that offer more flow and more go from Nitrous Express.
( 1 )
$1,077.26
—
$1,587.65
Nitrous Express Mopar plate nitrous systems feature Phase 3 Spraybarless technology for the ultimate in atomization and distribution. Their plate bolts right between the throttle body and the intake, making installation a breeze. They include Lightning series nitrous and fuel solenoids, as well as a wide-open throttle switch so that the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the gas. These systems also include jetting from 35 to 150 hp and can be upgraded to 250 hp with additional jets. A 10 lb. bottle, braided stainless lines, stainless bottle brackets, and an arming switch, as well as every nut, bolt, and electrical connector needed also come with the kits to give you everything you need for a complete installation.
( 2 )
$1,011.02
—
$1,709.31
Nitrous Express Holley Hi-Ram Plenum Plate Systems take full advantage of the Holley Hi-Ram intake manifold. The Hi-Ram plenum plate bolts right in between the upper and lower intake manifold making the install super clean and quick. These systems inject nitrous and fuel above each cylinder from the side of the runner providing direct port-like distribution without having a flow restricting nozzle or spray bar. The Hi-Ram nitrous plate is made from billet aluminum with passages machined directly into the plate so there is no need to worry about spray bars breaking or spinning. The systems come complete with billet aluminum and carbon fiber Lightning solenoids, stainless steel braided lines, wiring, switches and every nut, bolt and connector needed to install the system. The systems ordered with a nitrous bottle include a billet aluminum Lightning 500 bottle valve and the stainless bottle brackets.
Not Yet Reviewed
$1,624.48
Crank up the horsepower in your Mustang with Nitrous Express 5.0 Coyote plate nitrous systems. These systems feature a state-of-the art Phase 3 Spraybarless technology. The billet plate bolts between the throttle body and intake making installation quick and easy and it will not restrict airflow, while providing the ultimate in atomization and distribution, meaning more power for you. They have a clean, complete look by integrating the solenoids with the nitrous plate, while installation is made easy by using the direct plug-in fuel line adapter. Give your Mustang the extra power you desire with Nitrous Express 5.0 Coyote plate nitrous systems.
Not Yet Reviewed
$1,048.17
—
$1,667.05
Nitrous Express 5th Generation Camaro plate nitrous systems provide the ultimate in distribution and atomization, due to their Phase 3 Spraybarless technology. These systems feature a billet plate that bolts between the intake and the throttle body for a simple and fast installation, with solenoids integrated into the plate for a clean look. Nitrous Express 5th Generation Camaro plate systems include jetting from 35 to 150 hp and may be upgraded to 200 hp with additional jets. A TPS Autolearn switch activates the nitrous only at wide-open throttle and automatically shuts it off when you let your foot off of the accelerator.
( 1 )
$1,048.10
—
$1,277.71
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$1,040.21
—
$1,634.76
Nitrous Express C7 Corvette nitrous plate systems feature Spraybarless technology for the ultimate in atomization and distribution. These systems include a TPS Autolearn switch so the nitrous only activates at wide open throttle and automatically turns off when you let your foot off the accelerator. The billet plate bolts between the throttle body and intake, and the solenoids are integrated into the plate for a super neat and clean look. A direct-plug-in fuel line adapter is provided to simplify the installation, so there is no need to cut your factory fuel lines. Includes: * Includes jetting for 35, 50, 75, 100, 125, 150, 200, 250, and 300 horsepower. * Includes a stainless braided N2O line * Master arming switch * Relay * Relay harness * Necessary hardware
( 3 )
$1,094.48
—
$1,272.38
Nitrous Express GT500 nitrous plate systems feature a billet plate that's designed to fit between your throttle body and intake, making installation a breeze. They include aluminum and carbon fiber solenoids to give you ultimate performance, along with weight savings. They also include an NX fuel rail adapter for simple fuel system hookups, a TPS wide-open throttle switch, a 15 ft. nitrous feed line, a master arming switch, and everything else you could need for a complete high-quality installation. Nitrous Express GT500 nitrous plate systems come with jetting for 35 hp to 200 hp and can be purchased with a 5, 10, or 15 lb. bottle.
( 2 )
$1,033.46
—
$1,235.56
Nitrous Express offers a complete line of conversion kits for all of their systems, including these Hemi plate conversion kits. They're designed to fit Hemi throttle bodies, including Challenger, Chrysler 300 Dodge Rams and Chargers with the 5.7L-6.4L Hemi engines. The plate bolts between the throttle body and intake or intake and heads, making installation quick, easy, and attractive. These kits include the aluminum conversion plate, longer throttle body bolts, braided stainless nitrous and fuel lines, as well as jetting for 50, 100, 150, 200, 250, 300, 350, and 400 hp. The system includes: * Jetting for 50-400 hp * 24 in. S.H.O. nitrous line * Rubber O-ring gasket * Dual stage capable throttle body nitrous plate (Plate is pre-machined with a second set of nitrous and fuel passages, so you can easily upgrade to a dual stage system by adding part number NX933D.)
Not Yet Reviewed
$1,526.47
—
$1,667.05
If there's a way you can make more power, you take it! The Nitrous Express GT-R R35 is the best overall nitrous plate system available for Nissan GTRs. From the upgraded, high-flow solenoids to the patented Shark nozzle, these systems exhibit nothing but quality. Their Autolearn TPS module allows the nitrous to activate only at wide-open throttle, and the direct plug-in fuel line adapter provides a simplified installation. GT-R R35 systems include twin billet aluminum nitrous plates that bolt between the throttle bodies and the intake manifold for an easy install and a clean look. Systems also include: * Billet aluminum and carbon fiber Lightning Series solenoids * Stainless braided N2O line * Master arming switch, relay * Relay harness * Hardware * Jetting for 50, 75, 100, 125, and 150 hp * Choice of no bottle, or 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Systems with bottles include billet aluminum Lightning 500 bottle valve and stainless bottle brackets
Not Yet Reviewed
$1,483.63
—
$1,639.11
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage III kits come complete with a high-output pump, 3 qt. reservoir, nozzle, boost/RPM activated progressive controller, switch, hardware, and detailed instructions. Water has always been used to cool motors down, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
Not Yet Reviewed
$1,376.72
—
$1,628.74
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage I kits come complete with a high-output pump, 3 qt. reservoir, nozzle, switch, hardware, and detailed instructions. Water has always been used to cool motors down, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
( 4 )
$1,233.88
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage II kits come complete with a high-output pump, 3 qt. reservoir, nozzle, boost activated progressive controller, switch, hardware, and detailed instructions. Water has always been used to cool down motors, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
Not Yet Reviewed
$1,014.32
Nitrous Express Scion/Subaru nitrous plate systems feature Spraybarless technology for the ultimate in atomization and distribution. Their billet plate bolts between your throttle body and intake, making installation a breeze, and the solenoids are built into their plates to give them a super-clean look. They include a direct-plug-in fuel line adapter to simplify installation, as well as a TPS wide-open throttle switch, so that the nitrous only activates at wide-open throttle and automatically turns off when you let off the gas. Nitrous Express Scion/Subaru nitrous plate systems also include jetting for 35, 50, 75, and 100 hp, a 15 ft. stainless braided nitrous line, a master arming switch, and all other necessary hardware to help you complete the installation.
Not Yet Reviewed
$1,048.17
Nitrous Express Ford 4-valve nitrous plate systems feature a billet nitrous plate that fits between the throttle body and intake making installation quick, simple, and attractive. They include jetting for 50 hp to 300 hp and can be purchased without bottle or with a 5, 10, 12, or 15 lb. bottle, all of which include the billet aluminum Lightning 500 bottle valve. Nitrous Express Ford 4-valve plate systems include: * Billet aluminum and carbon fiber nitrous and fuel solenoids for ultimate performance and weight savings * Schrader valve fuel rail adapter for simple fuel system hook-ups * Wide open throttle switch * 4 AN nitrous feed line * Master arming switch * Relay and relay harness * All necessary hardware to complete installation
Not Yet Reviewed
$1,033.46
—
$1,235.56
Nitrous Express Ford 3.5L Ecoboost and 3.7L nitrous plate systems take these powerful motors to the next level with spraybarless technology—providing incredible distribution and atomization. For a clean look and easy installation, solenoids are integrated into the billet plate which is bolted between the intake and throttle body. Stainless steel brackets keep the 10 lb. bottle steady, while the new Lightning 45 valve feeds the "go juice." Nitrous Express includes a direct plug-in fuel line adapter for safe hookup without cutting factory fuel lines. The TPS autolearn switch included in these systems only activates at wide open throttle, and when you take your foot off the accelerator they automatically turn off. Additional features include a master arming switch, relay, extra-long stainless N20 line, relay harness, and hardware. Rip up the roads with Nitrous Express Ford 3.5L Ecoboost and 3.7L nitrous plate systems.
( 2 )
$1,017.64
Nitrous Express Ford 2.3L Ecoboost nitrous plate systems feature spray bar-less technology for the ultimate in atomization and distribution. The billet plates bolt between the throttle body and intake, making installation quick and easy; while the solenoids are integrated into the plate for a super clean look. Nitrous Express Ford 2.3L Ecoboost systems are available with or without a bottle. Systems include: * Lightning Series integrated nitrous and fuel solenoids * Longer throttle body bolts * Braided stainless hoses * Billet nitrous plate * Fuel rail adapter * Direct plug-in fuel line adapter is provided to simplify installation--no need to cut your factory fuel lines * TPS Autolearn switch--so the nitrous only activates at WOT and automatically turns off when you let your foot off the accelerator * Jetting for 35, 50, 75, 100, 125, and 150 hp * Master arming switch * Relay * Relay harness * All necessary hardware to complete the installation * Systems with a bottle include the new billet aluminum Lightning bottle valve and stainless bottle brackets
Not Yet Reviewed
$1,048.16
Nitrous Express 3-bolt plate systems for GM LS-style engines feature a billet nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive on all LS car and truck intakes with a 3-bolt throttle body. Power levels can be adjusted between 50, 100, 150, 200, 250, 300 and 350 horsepower. Order the system preferred for your setup. Systems include: * Billet nitrous plate * Choice of 5 lb., 10 lb., 12 lb., or 15 lb. aluminum bottle * Stainless steel bottle brackets * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 6 )
$1,040.21
—
$1,634.76
Add some extra muscle to your ride with Nitrous Express GM Truck nitrous plate systems. These GM truck nitrous plate systems include a TPS Autolearn switch, so the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the accelerator. The billet plate bolts between the throttle body and intake, and the solenoids are integrated into the plate for a clean appearance. A direct-plug-in fuel line adapter is provided to simplify the install, so there's no need to cut factory fuel lines. The GM Truck nitrous plate systems include: * Jetting for 35, 50, 75, 100, 125, 150, 200, and 250 hp * Stainless braided N2O line * Master arming switch * Relay * Relay harness * Necessary hardware
Not Yet Reviewed
$1,035.43
—
$1,704.73
The NXd Stacker nitrous systems are the pinnacle in economical, safe add-ons for your modified diesel truck. Nitrous Express is committed to advancing nitrous technology. With these systems, they have succeeded in boosting torque and horsepower, dramatically reducing exhaust temperatures, and eliminating that ugly black smoke cloud. They allow you to stack nitrous on your existing diesel chip. These Stacker systems include Lightning series solenoids, a nitrous bottle with a Lightning 45 bottle valve, stainless braided feed line, nickel plated fittings and all necessary hardware need for installation. For the most up-to-date technology, always look to Nitrous Express!
Not Yet Reviewed
$1,573.95
If you're looking for a nitrous system, you obviously want a lot more power. So, how much more do you want--200 hp? 300? 400? 500? 600? No matter how much it is, Nitrous Express Shark nozzle systems can deliver it. Built around NX's high-flowing "Shark" nozzles, they are tunable to deliver power boosts in those specific increments--and you get to pick whichever one you want. Race fuel is required. Systems include: * Fuel and nitrous distribution blocks or rails * Nozzles * Supply hoses and lines * Fittings * Switches * Solenoids * Wiring * Jets * Mounting hardware
Not Yet Reviewed
$1,385.99
—
$1,705.99
"Plug-and-play" isn't just for computers any more. Nitrous Express has brought the term to the car world with their NXL direct port nitrous systems. There's no drilling or engine disassembly required and there are no solenoids to mount. Everything for the systems is contained in the high-flow fuel rail(s). There's even a special wiring harness to make them genuine plug-and-play systems. Four-cylinder systems are selectable for 30, 60, or 90 hp increases, and versions for GM V8s are selectable for 80, 120, or 180 hp. The systems come complete with the nitrous bottle, insulated distribution lines, jets, wiring harness, and all mounting hardware.
Not Yet Reviewed
$1,106.85
—
$1,348.41
If you have a General Motors engine with throttle-body injection (TBI), don't worry. Nitrous Express has you handled. Their GM TBI nitrous systems are built around the potent "Shark" nozzle and can deliver a solid 50 to 125 hp, to give you that extra kick you're after. Kits include the nitrous bottle and mounting brackets, a nitrous supply hose, switch, wiring, relay, solenoids, and mounting hardware.
Not Yet Reviewed
$1,034.51
—
$1,280.18
These Nitrous Express EFI Race single nozzle nitrous systems are great for vehicles with limited room in the engine bay, especially those with minimal hood clearance. However, despite their relatively compact nature, they don't short you on power delivery. The heart of these systems is NX's potent "Shark" nozzle, which means that they can deliver power increases from 100 to 250 hp. Best of all, these increases are in graduated increments that you can select. The kits include the nitrous bottle, mounting brackets, nozzle, nitrous supply hoses and fittings, solenoids, switches, wiring, jets, and mounting hardware.
Not Yet Reviewed
$1,011.32
—
$1,534.03
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
