Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
Holley Gen 3 Ultra Dominator Carburetors
Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps
( 20 )
$1,549.95
—
$1,649.95
$1,393.95
—
$1,483.95
On Sale
Holley EFI LT1 Gen V Hi-Ram Intake Manifolds
Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band
( 2 )
$1,177.95
—
$1,349.95
$1,059.95
—
$1,213.95
On Sale
Holley Dual In-Tank Pumps
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$1,299.95
$1,168.95
On Sale
Holley Terminator EFI Fuel System Plumbing Kits
Holley Terminator EFI fuel system plumbing kits provide everything needed for a complete supply fuel system for the Terminator EFI self-tuning engine management system. They are engineered using Holley electric fuel pumps, fuel pressure regulators, and fuel filters, coupled with quality Earl's hose, to provide a fuel system tailored to the needs of your Terminator EFI system. The systems are available with different fuel pumps and types of fuel hose, so you can choose what best fits your application. All Holley Terminator EFI fuel system plumbing kits feature quality Earl's anodized aluminum fittings to get the job done and look good, too.
( 10 )
$1,399.95
—
$1,449.95
$1,258.95
—
$1,303.95
On Sale
Holley Sniper EFI Terminator X Stealth 4500 Throttle Bodies
If you're piecing together your EFI system or have suffered damage to your current throttle body, Holley Sniper makes it easy to get the parts you need—without buying an entire EFI kit to get the service part you need. These Terminator X Stealth 4500 throttle bodies contain eight injectors and support up to 1,500 hp naturally aspirated or 1,250 hp with forced induction. Get back on the street or track with Holley Sniper fuel injection system performance parts! Additional details: * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * Gen 3 Ultra Dominator style 4-bolt air cleaner flange offering a variety of air cleaner options * 4500 service throttle bodies are available in either black anodized or polished cast aluminum
Not Yet Reviewed
$1,177.95
$1,059.95
On Sale
Holley EFI Hi-Ram Intake Manifolds
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$1,075.95
On Sale
Holley Sniper EFI Fabricated Race Series Intake Manifolds
Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.
( 1 )
$1,449.95
$1,303.95
On Sale
Holley Sniper Fabricated Dual Plenum Intake Manifolds
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,549.95
$1,040.47
—
$1,499.95
On Sale
Holley 4150 XP Supercharger Carburetors
By popular demand, Holley is expanding the draw-thru supercharger carburetor line to now include the 4150 XP Series. Like the existing HP line, these carbs are available in 600, 750, and 950 cfm flow rates—and standard polished with black accents. The feature-laden XPs include a contoured venturi inlet for balanced airflow, screw-in air bleeds for precision-tuning capabilities, high-flow billet metering blocks, billet base plate, and Dominator-style fuel bowls which allow plumbing from either side. Supercharger XP carburetors also have a unique capability that allows their power valves to reference the intake manifold vacuum below the supercharger. This enables the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Holley XP carburetors are the standard for square bore race carburetors. Race-Ready out of the box! Order the model with options preferred for your vehicle. Product details: * Tumble polished shiny finish for good looks * Application-specific blower calibration * Contoured venturi inlet offers balanced airflow for increased horsepower * Screw-in air bleeds for precision-tuning capabilities * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant high-volume fuel delivery * 4-corner idle allows you to precisely control your idle system * Mechanical secondaries for perfect off-the-line launches * Boost referenced power valve for proper enrichment under acceleration * Throttle lever cut off for clearance on a sideways application * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
( 2 )
$1,126.95
—
$1,349.95
$1,013.95
—
$1,213.95
On Sale
Holley Aluminum Ultra XP Carburetors
Holley's Ultra XP carburetors are up to 38 percent lighter than their traditional carbs, offer 20 percent greater fuel capacity, and include a host of other features. One of the main perks is an integrated idle bypass valve that allows for idle adjustments while maintaining the proper throttle-plate-to-transfer-slot relationship. You'll also get all-aluminum construction, fully tunable billet metering blocks, billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. Enjoy the ultimate in square-bore race carbs; order the Ultra XP carburetor with options best suited for your race application! Some of the many other features include: * Your choice of several finishes and CFM ratings (from 600 to 950) * Contoured Venturi inlet offers balanced airflow for increased hp * Dual accelerator pumps provide the perfect amount of fuel, from idle to full-throttle * Clear sight windows on both sides of bowls for safe and easy fuel level adjustments * -8 AN (O-ringed) inlet threads offer a large variety of plumbing options from either side * Mechanical secondaries for perfect off-the-line launches * 100-percent wet-flow tested by Holley technicians
( 44 )
$1,499.95
$1,105.95
—
$1,449.95
On Sale
Holley Sniper EFI Fabricated Intakes
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$1,311.95
—
$1,449.95
