Availability
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,583.95
—
$1,645.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 164 )
$1,022.50
—
$1,578.50
Edelbrock Victor Jr. CNC Chrysler cylinder heads are designed for high output Chrysler 426-572 HEMI engines. They feature fully CNC ported combustion chambers and CNC blended seats for optimal air flow performance. These heads also feature a revised exhaust valve angle to accommodate larger intake valves and feature brass tubes installed in exhaust pushrod holes to allow maximum clearance with minimal port intrusion.
( 5 )
$1,708.50
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$1,047.95
These precision, self-aligning hydraulic roller lifter kits from Edelbrock are the perfect match for Edelbrock hydraulic roller lifter camshafts for small and big block Chevy and small block Ford. These retrofit lifters are designed for hydraulic roller lifter cams, in non-roller engine blocks originally equipped with conventional lifters.
( 5 )
$1,007.95
—
$1,041.95
Edelbrock Performer RPM intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM aluminum intake manifold that is coated with Edelbrock's EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer RPM intake features larger plenums and runners for engines with a camshaft, exhaust, and other performance modifications. Ready for a change? Try these Edelbrock Performer RPM intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 4 )
$1,015.95
—
$1,396.95
Step up to race-level performance with OEM compatibility using these Edelbrock E-Series E-210 aluminum cylinder heads. They feature larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts--perfect for spec series racers and large-displacement engines. Available bare or assembled, E-210 cylinder heads allow you to use off-the-shelf headers and hardware. Forget those overseas castings; go with quality, economy, and performance. Go with Edelbrock E-Series E-210 cylinder heads.
( 13 )
$1,654.95
Edelbrock Ford flathead cylinder heads feature your choice of the original Edelbrock script logo or the block-style logo. Designed for both Fords and Mercurys, these heads are rugged, ribbed internally and externally, with a large water capacity, and excellent breathing characteristics. Available with 74 cc or 65 cc chamber volumes, the 65cc heads support an 8.0:1 compression ratio on blocks with a 3/16 in. base relief (stock bore and stroke); compression ratio increase is approximately 3/10 of a percent with each 1/8 in. of stroke increase. The high lift/large chamber versions feature a new "raised roof" combustion chamber design and are CNC-machined for high lift cams. Perfect for reducing compression in supercharger applications or for low octane fuel, they offer increased valve clearance and improved flow capacity. Match these heads with Edelbrock's popular Ford flathead intake manifolds. Edelbrock Ford flathead cylinder heads are cast at the Edelbrock foundry in the USA of T-6 tempered A356 aluminum. They're available for a wide range of vehicles from the 1930s, '40s, and '50s.
( 7 )
$1,046.95
These Edelbrock Victor Jr. LS1 carbureted intake manifold packages are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. They include an electronic timing control module that picks up MAP, crank position, and cam position in order to drive the stock coil-on-plug ignition system.
( 1 )
$1,077.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$1,070.95
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
—
$1,251.50
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,332.95
—
$1,479.95
These Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on engine upgrade with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make these heads an ideal choice for use with stock equipment as well as the new RPM Air-Gap manifold. These heads feature a slight increase in compression over the factory heads, offer more flow than stock, and accept adjustable aftermarket rocker arms. These heads are available in bare or assembled versions; hardened pushrods are required.
( 10 )
$1,214.50
—
$1,251.50
Ideal for those who desire affordable heads that make maximum power, these Victor Jr. heads from Edelbrock are just what the doctor ordered. Specifically designed for the needs of competition and ultra-high performance street engines, they offer increased horsepower and rpm potential in an out-of-the-box, cost-effective, race-winning setup. Features include hardened ductile iron valve seats and phosphor-bronze guides. They accept standard hardware and most are available in bare and assembled versions.
( 14 )
$1,106.50
—
$1,170.50
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,587.50
—
$1,625.50
Edelbrock Performer RPM Pontiac CNC cylinder heads have the same specifications as our popular Performer RPM cylinder heads for 1962-79 455 c.i.d. Pontiac engines, but feature a CNC-machined combustion chamber. The CNC-machined chambers result in a consistent and precise chamber for improved flow performance. Performer RPM CNC cylinder heads are available in two chamber sizes. The 87cc chamber version is ideal for 9.5:1 engines and will deliver excellent street performance on low-octane fuel. Performer RPM CNC cylinder heads with 72cc chambers are best for higher compression engines. Both are patterned after the same port flange configuration as the 1969-70 Ram-Air IV Pontiac cylinder heads.
( 2 )
$1,521.50
—
$1,560.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
