Availability
Reduce turbo lag while protecting other engine components and help to reduce underhood temperatures with Lava turbo heat shields from Heatshield Products. These custom-fit components use extreme-temperature materials to keep the heat on the hot side of the turbo where it belongs. Installation is a breeze since you don't have to trim or fit the heat shield blanket to fit your turbo housings. Heatshield Products Lava turbo heat shields' silica contact layer and silica insulation make the turbo shields capable of withstanding 1,800 degrees F continuously.
( 9 )
$161.99
—
$190.99
Heatshield Products Stealth turbo heat shields can increase boost, reduce turbo chatter or flutter, and help keep your turbo from lagging. By retaining heat inside the shields, your turbo not only becomes more efficient but your underhood temperatures also get reduced, lowering the intake temperatures, and adding power. Heatshield's low-profile black Stealth shields withstand up to 1,800 degrees F (continuous), and their custom design means that no trimming is needed, making installation a snap. Whether you're hardcore racing or in a street machine, heat kills performance—battle back against it with the Stealth turbo heat shields from Heatshield Products best suited for your application!
( 3 )
$185.99
—
$264.99
Funk Motorsports offers turbo heat shields for a wide range of (universal) applications, as well as vehicle-specific models for select BMW, Honda, Ford, and Subaru vehicles from 2002 and up. These turbo and/or turbo wastegate thermal blankets work to insulate the hot side and retain the heat within the exhaust gasses themselves. Hotter gasses accelerate faster, leading to them leaving the system sooner—improving spool up and throttle response. Insulating the turbo also helps to lower the amount of heat that dissipates into the engine bay and intake pipework. A cooler intake results in higher performance and more consistent power figures over time. The 4-layer shields are offered in three finishes: titanium twill, carbon fiber twill, and inside out (for turbos in contact with a heat source). Additional details: * Inside-out blankets have internal material mirrored on the outside, as well * Available for a variety of turbocharger and wastegate styles * A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. Protect anything from oil lines, coolant lines, electronics, and even bodywork positioned close to the turbo from the dangers of excess heat * Funk shields feature specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. The new fireproof ultra-high temperature stainless steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1,300 degrees C * New, thicker internal heat lagging insulation provides up to 3x improved heat reduction. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities * ROHS tested and approved to ensure compliance and desired parameters * NOTE: Turbo blankets are not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regard to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. Funk Motorsports takes no responsibility for fluid contamination their products.
( 1 )
$101.95
—
$263.67
Turbo-Guard carbon fiber turbo blankets feature dual ceramic layers for more heat reduction and are double-stitched for added durability. Ceramic protects up to 2,500 degrees F and insulates much more than fiberglass or cheaper materials used inside cheap blankets. Additional notes: * Faster spool times * Decrease turbo lag * Working temperature 2,300 to 2,800 degrees F * Titan turbo blankets: Fiberglass shell / dual layer ceramic core * Black blankets: Carbon fiber shell / dual layer ceramic core (weighs 10 percent less) * Models available for T3, T4, and T6 style turbochargers
Not Yet Reviewed
$109.99
—
$170.99
Turbo-Guard titanium turbo blankets feature dual ceramic layers for more heat reduction and are double-stitched for added durability. Ceramic protects up to 2,500 degrees F and insulates much more than fiberglass or cheaper materials used inside cheap blankets. Additional notes: * Faster spool times * Decrease turbo lag * Working temperature 2,300 to 2,800 degrees F * Titan turbo blankets: Fiberglass shell / dual layer ceramic core * Black blankets: Carbon fiber shell / dual layer ceramic core (weighs 10 percent less) * Models available for T3, T4, and T6 style turbochargers
Not Yet Reviewed
$109.99
—
$170.99
Heavy-duty downpipes for your heavy-duty truck! Flowmaster Chevy/GMC 6.5L truck turbo diesel downpipe kits feature thick-walled aluminized pipes, clamps/hangers, brackets, instructions, decals, and a warranty card all in one box.
( 14 )
$249.95
Pacific Performance Engineering replacement high-flow up-pipes allow as much as 53 percent more flow than stock pipes, and they're a direct bolt-on to your factory manifolds. Diesel engines, even stock, produce high temperatures and pressures. OEM up-pipes eventually fail from constant temperature and pressure fluctuation. Unlike factory parts, these OE replacement high-flow up-pipes are manufactured from 11-gauge 304 stainless steel. They include internally-sleeved bellows that can take the abuse of high temperature and high pressure. Order the model recommended for your application.
( 2 )
$134.99
—
$269.99
Set your rig up with Dorman turbo up pipes for an upgrade that fits perfectly. Their turbocharger up pipes are direct replacements so your install will be convenient and the performance efficient. Dorman pipes are precision crafted with stainless steel tubular construction to protect against warping or cracking plus they are rigorously inspected and vehicle tested to ensure a trouble-free fit and performance. All include gaskets and may include bolts and nuts as necessary. You don't need a hassle to maintain the power of a leak-free flow; you just need the quality and value of Dorman turbo up pipes.
( 24 )
$107.99
—
$251.99
These performance turbo downpipes from BD Diesel allow better exhaust flow for your diesel. They feature aluminized steel construction, offering lower exhaust temperatures and improved fuel economy.
Not Yet Reviewed
$243.95
Summit Racing™ billet turbo inlet flanges make fabricating the transition from round pipe into the turbine inlet flange a breeze. They are CNC-machined from billet 304 stainless steel and have a .500 in. thick mounting flange that won't warp or leak. They come in various styles and configurations to help you build your turbo project quickly. Features: * Simplifies fabrication * CNC machined from billet 304 stainless steel * T4 or T6 flanges * Single or dual inlets * Open or divided scroll options * M10 x 1.5mm stud holes * Options for 16-gauge pipe or Schedule 40 weld elbows
( 1 )
$179.99
—
$199.99
Mishimoto titanium turbo blankets help reduce the heat in your engine bay. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer and 96 percent silica fiber inner layer, Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Available in several sizes to fit popular turbochargers, titanium turbo blankets have an interior rating at 1,260 degrees C and can withstand up to 982 degrees C of direct exterior heat. Additional specs: * Rated to 1,800 degrees F direct heat and 2,000 degrees F radiant heat * Interior rated to max temperature of 2,300 degrees F * Available in T25/T28, T3, T4, and T6 sizes * Mishimoto Lifetime Warranty
Not Yet Reviewed
$141.95
—
$284.95
Optimize your diesel's performance with a non-restrictive aFe Atlas turbo downpipe. Engineered to outflow and outperform the restrictive OE down-pipe on your vehicle, they are designed with 3 in. mandrel-bent steel tubing offering smoother transition bends for low turbulence, increased airflow, and quicker turbo spool times. aFe Atlas turbo downpipes utilize factory mounting locations for true bolt-on performance and feature high-quality, OE-style V-band flanges for a complete 360-degree leak-free sealing surface. GM pipes are coated with a black finish and wrapped in high-temperature thermal header tape for better insulation, reducing EGTs and underhood temperatures.
Not Yet Reviewed
$168.00
—
$273.00
DEI ONYX Series turbo heat shields fit the popular smaller turbo sizes. They use an exclusive combination of premium heat-resistant textiles and newly designed stainless steel attachment anchors. DEI ONYX shields are used to maintain a more consistent temperature in your turbo, increasing efficiency and decreasing turbo lag. DEI ONYX Series turbo heat shields feature: * Strong riveted anchors to secure shield * Black carbon fiber look * Ultimate thermal barrier reduces turbo lag * Double reinforced seams inside and outside * Direct heat resistance up to 1,800 degrees F * Radiant heat resistance up to 2,500 degrees F
Not Yet Reviewed
$255.99
—
$264.99
Dorman turbo vane position sensors are essential direct replacement parts. Due to the highly failure-prone original part, you can prevent loss of engine power, as well as potential wear and tear on your turbocharger system, with these vane position sensors. They offer a proper fit every time, plug-and-play installation, and need no programming. Reliably validate the position of turbocharger vanes; replace failed sensors with Dorman turbo vane position sensors.
( 13 )
$161.99
Mahle Original offers turbocharger gaskets for a wide range of vehicles from the 1980s and up. These OE-type replacement seals are available in different styles, materials, and configurations to ensure a precise fit and premium performance. Order the gasket model or set recommended for your application.
Not Yet Reviewed
$124.99
Custom-fit DEI Titanium turbo shields provide the ultimate means of reducing turbo lag, while serving as superior heat barriers. They shield and protect engine components, hoods, and painted surfaces and offer a very cool carbon fiber look. Made from pulverized volcanic rock and then strained into a fiber material, Titanium turbo shields can withstand direct heat up to 1,800 degrees F and radiant heat up to 2,500 degrees F. This means retaining more heat in the turbine and less damaging underhood heat. The results are a cooler air intake temperature and a boost in horsepower! Stronger and more durable than other turbo blankets or shields, DEI Titanium turbo shields include high-temperature rated silica insulation padding under a tight outer layer for extra-added protection against extreme turbo-generated heat.
( 5 )
$185.99
—
$256.99
Standard Motor turbocharger hoses are direct-fit OE replacements that ensure the proper fit, form, and function. Each hose undergoes extensive testing to OE specifications to deliver reliable performance and a long service life. Select the hoses designed for your vehicle.
Not Yet Reviewed
$136.99
—
$194.99
Introducing the Turbo-Guard billet turbo inlet screens, the ultimate in turbo protection! These inlet screens are designed to protect your turbo and engine against any debris, such as pebbles and rocks, from entering the turbocharger. Crafted with precision, these screen mesh guards are machined from billet 6061 aluminum—built to withstand the harshest conditions to protect your boost system with unparalleled strength. They are available in different diameters—radiused to allow for maximum airflow. Choose from five stunning anodized finishes: black, purple, red, blue, and gold. Each color will not only complement your vehicle, they also will add a sleek, stylish flair. Upgrade your protection with the Turbo-Guard Billet today and drive with confidence for years to come! Select the billet turbo inlet screen in the size and color preferred for your application. Key features: * Unmatched durability—built to protect your boost system with unparalleled strength * Easy installation, no clamps required * Comes with 2 set screws and LockTite
Not Yet Reviewed
$139.99
—
$149.99
The bar has been raised! These DEI Titanium GEN-3 turbo shields are the most technologically advanced turbo shields ever. DEI has incorporated all of their experience to build the absolute best turbo shields on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, they developed the Titanium GEN-3 turbo shields. They feature a silicone coated TITANIUM LR outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shields available. DEI Titanium GEN-3 Turbo Shields feature: * Outer shell coated in silicone to insulate and hold up under extreme conditions, helps prevents fraying and encases seams to make them over 4 times stronger * Insulation layer, a thick layer of silica insulation keep heat in turbo shield and turbo housing, providing a low thermal conductivity making one of the best insulators * Inner layer, stainless steel, glass fiber and silicone adds to insulating and thermal properties, increases seam strength, durability and insulation value * Inner cover, stainless steel fabric holds up against the highest temps, will not break down or become brittle with heat * Direct heat resistance of 1,800 degrees F * Radiant heat resistance of 2,500 degrees F
Not Yet Reviewed
$237.99
—
$263.99
Rein Automotive TechSelect turbo kits are the perfect solution for efficient turbocharger maintenance. The turbocharger mounting kits include all hoses, hardware, and gaskets needed for the replacement of a turbocharger. All components of the kits are direct replacements to the OE, meaning hose assemblies include brackets along with heat shielding and other components, the hardware that is provided meets the same specifications as the OE and the proper sealing components are included to prevent leaks. All components are designed and manufactured to withstand the rigorous operating environment of turbocharger systems and provide trouble-free installation. Select the kit for your vehicle.
Not Yet Reviewed
$236.99
DEI Ultra 47 turbo heat shields solve the problem of extreme underhood heat, stops heat damage of painted or carbon fiber hoods, and helps turbos spool faster. These custom-fit turbo blankets are constructed with a tri-layer mix of an aluminum impregnated glass fiber outer shell with a high-temperature insulating mat core and silica glass blend liner. Double stitching and heavy-duty capped anchor points make these heat shields look great and perform even better. Keeping the exhaust heat in the Turbo housing reduces turbo spool up time and exhaust gas velocity, resulting in more power quicker. The turbo heat shields are available to fit T-3 or T-4 sizes; sold individually or in kits. Additional specs: * Direct heat resistance of 1,350 degrees F * Radiant heat resistance of 1,800 degrees F * Kits will include shield, roll of black wrap, stainless steel locking ties, and roll of fastening wire
( 1 )
$129.99
—
$154.99
Summit Racing™ turbo oil feed lines ensure that your system gets an adequate oil supply. We offer replacements for your OE setup, as well as aftermarket kits that prevent premature bearing failures from oil starvation. All include extra-flexible, smooth bore PTFE hose and high-quality adapter fittings. Whether you're replacing or upgrading, Summit Racing™ turbo oil feed lines are available for your application.
Not Yet Reviewed
$169.99
Garrett Performance offers turbo installation kits for a variety of models, including Turboworx GT30/35 and GTX30/35. They are available to fit Garrett V-Band/V-Band, T3 Divided/V-Band, or T4 Open/V-Band turbine housings. The kits include drain line with fittings, -4 AN x 3 ft. stainless steel feed line, inlet gasket and outlet flange, -4 oil restrictor fitting, and .035 in. and water jacket fittings. (See Notes above for specific part details.) Order the installation kit recommended for your turbocharger application.
Not Yet Reviewed
$144.99
—
$159.99
Thermo-Tec Rogue Series turbo covers provides an easy-fit design that keeps the turbine spooled up, reducing turbo lag. The covers feature dual layer construction to increase durability, reduce underhood temperatures, and improve horsepower, as well as performance by maintaining temperatures inside the turbo. Thermo-Tec Rogue covers include wiring for easy installation.
( 2 )
$188.91
—
$211.14
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
