Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
26 Results Found For "sbc iron heads"
Showing In Stock Items. Show All 31 Items.
Not Showing Customizable Items. View Customizable Items.
Diamond Pistons Small Block Chevy Nitrous Series Pistons
Diamond Pistons offers small block Chevy Nitrous Series pistons for a wide range of engine and cylinder head applications from the late 1960s and up. These forged aluminum replacements are available in numerous bore, stroke, size, and other configuration options. The sets feature: * Forced pin oilers from the oil ring * Pin fitted * Vertical gas ports * 3-D dome and pockets * Designed for nitrous applications * H-13 pins, locks and support rails (if required) included
( 1 )
$134.00
VEGE Remanufactured Cylinder Heads
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 47 )
$239.99
—
$249.99
Flatout Gaskets RCC Copper Cylinder Head Gaskets
Flatout Gaskets RCC copper cylinder head gaskets are made with an exclusive rubber-coated copper process. The base metal is 100 percent soft annealed copper and the specially formulated, high-temperature rubber coating is designed to seal oil and coolant.
( 14 )
$246.99
ARP Pro Series Cylinder Head Studs
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts and all studs come complete with hardened parallel washers. Some applications are undercut where needed to provide even clamping and load distribution with accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 821 )
$194.99
Edelbrock E-Series Head Bolt Kits
Edelbrock offers E-Series head bolt kits to install one set of cylinder heads. Each bolt kit includes the necessary bolts and washers for your application. E-Series bolts have a yield tensile strength of 190,000 psi for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. These cylinder head bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock "E" stamped into the hex head. Order the E-Series head bolt kit designed for your application needs.
( 5 )
$102.95
ARP High Performance Cylinder Head Stud Kits
ARP high performance cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs. A black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings. Keep your cylinders mounted securely with a set of ARP high performance cylinder head studs; order the hardware recommended for your year/make and engine application
( 37 )
$231.99
Professional Products Cyclone Intake Manifolds
The Cyclones are Professional Products' lowest profile small block Chevy manifolds and are also the only ones that are street-legal on pollution-controlled vehicles. Cyclone manifolds are set up to accept a spread bore carb, but come with an adapter plate that permits the use of square bore carbs. To remain street-legal with a square bore carb, you must use one that is also approved as street-legal for your application. These Professional Products Cyclone manifolds are available in a variety of configurations to suit your needs.
( 34 )
$145.99
—
$223.99
BluePrint Engines Dual Plane Vortec Intake Manifolds
BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.
( 5 )
$249.99
Cometic Street Pro Top-End Gasket Kits
Cometic Gasket Street Pro top-end gasket kits bring race-proven MLS technology to the budget-minded hot rod guy or gal. The multi-layer steel gasket is their commitment to cutting-edge technology and producing superior-quality gaskets. Street Pro gasket kits are constructed from multiple layers of stainless steel for its strength, along with excellent rebound and corrosion-resistant characteristics. The outer layers are coated with a rubber-based material to create a superior, heat-resistant seal that can withstand extreme cylinder pressures. Cometic gaskets are ideal for everything from aluminum heads to cast iron or aluminum blocks. Street Pro gaskets offer top-end quality that you can afford.
( 7 )
$150.31
—
$243.81
Professional Products Cyclone Vortec Intake Manifolds
These Cyclone intake manifolds from Professional Products are designed to fit engine swaps using the 1996 and later Vortec cast iron heads or the Edelbrock E-Tec aluminum heads. These manifolds can be used on any Chevy V8 engine utilizing the late Vortec head. They have a provision for an external water bypass. These Cyclone Vortec intake manifolds feature 4-corner water outlets, dual distributor hold-downs, a square bore carb adapter and gasket, and will work with late model style water neck, alternator, HEI, and air conditioning brackets.
( 19 )
$173.99
Allstar Performance Water Pumps
Water flow is essential to the cooling demands of your car engine—its efficiency depends on it, in fact. Allstar Performance water pumps are designed to spin the flow of water at idle to cool things down. An overheating problem rarely shows up when you're cruising down the road. Ironically, it will rear its ugly head when you pull up to a stoplight. These unique aluminum pumps disperse the heat quickly and adjust water flow to the engine evenly. Experience the comfort and performance results of moving sufficient water through your system for better cooling. Order the pilot shaft diameter needed for your application.
( 4 )
$169.99
—
$199.99
Dart Severe-Duty Stainless Steel Valves
Dart severe-duty stainless steel valves are designed to withstand the pressures of high-lift roller cams and feature a head design that promotes high flow. They are constructed of high-strength stainless steel that is backcut just enough for flow, without sacrificing strength. They feature swirl-polished heads with hard chrome stems.
( 14 )
$146.99
Diamond Pistons Race Series Pistons
Diamond Pistons Race Series pistons will withstand some serious horsepower for your high performance engine. These 2618 aluminum pistons are not only significantly lighter than the factory pistons but also superior in strength. The 2618 alloy is specifically for high-horsepower, nitrous, and boosted engines making up to 2,000 hp. Diamond Pistons Race Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Inside design forging with fully machined underskirts for maximum strength * Valve pockets designed to work with most aftermarket cylinder heads * Side gas ports for better ring seal * Moly skirt coating for friction-loss and skirt-wear protection * Premium H-13 wrist pins included; chamfered for round wire locks
( 1 )
$136.00
Diamond Pistons Domestic Series Pistons
Diamond Pistons Domestic Series pistons are designed and tested for the high-stresses seen with high-compression, forced induction, or nitrous-fed domestic engines. Engineered with longevity, reliability, and strength, these forged aluminum pistons are specifically designed for your engine to deliver the results you demand. Diamond Piston Domestic Series pistons feature: * 3D milling on piston crowns for "ready-to-install" finish * Generous valve pockets designed to work with stock or oversized valves and various cylinder heads * Constructed from forged 4032 or 2618 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)
( 2 )
$133.00
—
$142.00
Diamond Pistons 23 Degree Nitrous Dome Series Pistons
Diamond Pistons offers 23 degree Nitrous Dome Series pistons for a variety of applications, including many Chevy small block Gen I engines from 1968 and up. The forged 2618 aluminum dome-style pistons with two valve reliefs are available in a variety of bore and stroke sizes, rod lengths, compression heights, head volumes, and ring thicknesses. They're available individually or in sets of 8. Additional product details: * Forced pin oilers from the oil ring * Pin fitted * Vertical gas ports * 3-D dome and pockets * Designed for nitrous applications * H-13 pins, locks and support rails (if required) included
Not Yet Reviewed
$142.00
Edelbrock Elite II Series Valve Covers
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 184 )
$173.95
—
$196.95
Professional Products Hurricane Intake Manifolds
These Hurricane intake manifolds are one of Professional Products' very most popular race manifolds. If you are looking for the utmost in performance for the very least amount of cost, then these manifolds are for you! The base Hurricanes are terrific manifolds for budget engines such as claimer motors.
( 25 )
$204.99
—
$249.99
Professional Products CrossWind Intake Manifolds
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 44 )
$212.99
—
$249.99
Diamond Pistons Small Block 15 Degree Brodix -12 Dome Series Pistons
Diamond Pistons Small Block 15 Degree Brodix -12 Dome Series pistons are available for a variety of applications, including many Chevy V8 Gen I engines from 1967-2001. Forged from aluminum with two valve reliefs, the dome-style pistons are offered in different bore and stroke sizes, along with numerous other options. Order individually or in a set of 8. Additional details: * 900 hp rated * Forced pin oilers from the oil ring * Pin fitted * 3-D dome and pockets * 4130 pins, locks, and support rails (if required) included
Not Yet Reviewed
$146.00
Hypertech ThermoMaster Computer Chips
Hypertech ThermoMaster Power Chips replace your stock PROM, which holds the settings for fuel flow and spark advance. This is a Stage 2 chip that optimizes the spark and fuel curves for max performance. The ThermoMaster Power Chip is designed for use with a 160 deg. thermostat and premium pump gas (91 Octane or better). Maximize the performance of your ride with a Hypertech ThermoMaster Power Chip!
( 30 )
$186.99
—
$216.99
Wiseco Professional Series Pistons
Wiseco Professional Series pistons are designed to take the hard-driving abuse from your performance engine. They're forged from either 2168 or 4032 aluminum alloy for maximum strength, and then precision CNC-machined to their intricate final configurations under close tolerances. Where applicable, designs incorporate strength provisions to deal with turbocharging, supercharging, and nitrous. Chromoly wrist pins and Spirolox retainers are included. Choose the model tailored for your engine application.
( 9 )
$136.99
Hypertech Street Runner Power Chips
Hypertech Street Runner Power Chips replace your stock PROM, which holds the settings for fuel flow and spark advance. This is a Stage 1 chip that improves the spark and fuel curves for better performance. It provides max power at wide-open throttle but does not affect the idle or part-throttle settings. This means your mileage and emissions aren't affected! The Street Runner Power Chip is designed for use on a stock vehicle using premium pump gas (91 Octane or better). Wake up your ride with a Hypertech Street Runner Power Chip!
( 41 )
$179.99
March Performance Idler Pulleys
March Performance idler pulleys are manufactured from quality polished aluminum. They feature ribbed and non-ribbed designs with double bearings and are hard-coated for increased wear. March idler pulleys were designed to help prevent your belts from slipping.
( 34 )
$194.99
JET Stage 1 Computer Chips/Modules
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$197.99
