Availability
Showing In Stock Items. Show All 24 Items.
Summit Racing™ turbo header flanges give you a great starting point when fabricating a set of custom turbo headers for your ride. These flanges are cast from 304 stainless steel and then milled flat for a consistent seal on the header gasket, unlike laser-cut flanges that often have some warping. The 1/2 in. thickness provides enough rigidity and strength to support the weight of long tube headers and turbos. The port openings are counterbored for the tube diameter to locate and simplify the welding and smooth the transition into the tube without interfering with the gasket surface. Select the size needed. Check out these features below: * 1/2 in. thick 304 stainless steel flanges provide enough strength/rigidity to support the weight of long-tube headers or turbo manifolds * The ports and bolt holes are CNC-machined for a perfect fit on all Gen 3 and 4 LS-based engines * Available in 1.75, 1.875, 2.0 in. sizes * The flanges are milled flat for a consistent seal on the header gasket * The flange ports have a counterbore to locate the primary tubes and simplify header assembly. This counterbore also allows for easier access to weld the tubes internally while maintaining a smooth transition from the exhaust flange
Not Yet Reviewed
$189.99
We have put together these Summit Racing™ exhaust gasket and bolts Pro Packs to ensure a leakproof seal for your headers. They feature Fel-Pro Performance exhaust header gaskets made from high-temperature, high-density fiber material around a perforated steel core for durability and heat resistance. To provide a tight seal, we include Stage 8's Grade 8 locking header bolts. They use a patented system that consists of a grooved hex head bolt, a retainer, and a snap clip. The retainer fits over the bolt head and locks the bolt against the header tube, and the snap clip holds the retainer in place. Use one of these Summit Racing™ exhaust gasket and bolts Pro Packs to eliminate blown header gaskets from loose bolts.
( 7 )
$101.66
On Sale
Blackheart intermediate pipes are strong, lightweight stainless steel, and mandrel-bent where applicable. They're available in a variety of sizes and configurations with quality welds to ensure strength, longevity, and good looks. These pipes help provide vehicles with maximum exhaust velocity, ground clearance, style, and high performance! Order the Hooker Blackheart intermediate pipes tailored for fitment on your vehicle.
( 15 )
$212.95
—
$249.95
On Sale
Hooker LS swap exhaust system intermediate pipes provide bolt-in compatibility with Hooker LS swap exhaust manifolds (2nd Gens only), headers, engine mounting brackets, and transmission crossmembers specifically designed for this vehicle application. They are manufactured from highly durable stainless steel and include the necessary mounting gaskets and hardware to complete the installation. The pipes will help to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle.
( 17 )
$199.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$380.95
—
$399.95
$219.95
—
$247.95
Gardner-Westcott engine dress-up bolt kits add a touch of class under your hood. The hardware is offered in a variety of materials, finishes, and head styles—with your choice of automotive logos or designs etched on the fasteners. Over a hundred different kits are available; order the model recommended for your vehicle and engine application.
( 109 )
$157.99
On Sale
Hooker Super Competition Block Hugger headers are a great choice for your custom car, truck, or rod. Ideal for applications where the frame rails are close to the engine block. These headers feature a tucked-in tube design that's perfect for those tight-fit installations! Mandrel-bent, tuned-length primaries decrease backpressure and increase exhaust velocity, improving horsepower, torque, and throttle response. Their collectors are positioned for maximum starter and engine mount clearance; and exit parallel with the oil pan rail to allow for maximum ground clearance. Hooker Super Competition Block Hugger headers come complete with the gaskets, header bolts and collector reducers needed for a successful installation.
( 27 )
$414.95
$228.95
These Doug's Headers engine swap motor mounts are designed to bolt on an engine not originally available in your vehicle. Best of all, they are specially designed to work with your Doug's headers. The mounts are manufactured from durable materials and include mounting hardware for installation.
( 7 )
$151.15
—
$161.75
On Sale
Hooker Blackheart engine mount brackets are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles, making your swap a good fit. The mounts are fabricated from steel to provide a strong and rigid foundation for your engine.
( 2 )
$216.95
$109.95
—
$199.95
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 69 )
$330.95
$137.95
—
$238.95
Hooker Blackheart steering shafts are designed to work with the Blackheart headers, but will also work as factory replacements. Blackheart steering shafts are e-coated for maximum protection against corrosion. These shafts offer a complete bolt-on solution, with no modifications necessary.
( 65 )
$156.95
—
$179.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$379.95
$164.95
—
$237.95
Improved Racing oil cooler adapters have a low-profile for more header clearance. The adapters are machined from a single piece of billet aluminum and black anodized. For additional clearance with reliable sealing, they come with aluminum gaskets fitted with Viton® seals, and the adapter mounting holes are counter-bored so the mounting bolts fit flush with the adapter surface. Select Improved Racing oil cooler adapters are also available with a built-in thermostat. Oil coolers help prevent the oil from getting too hot, but are also prone to lowering oil temperatures too much, especially in colder weather or during highway driving. The rebuildable thermostat speeds warm-up and helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels. Features and benefits * 100 percent bolt-on solution; no fabrication, bending, or line modification is required * Viton® seals throughout for maximum reliability * Oil exiting the adapter is filtered oil * 6061 T-6 billet aluminum construction with black MIL-A-8625 Type II anodized finish * Standard female -8 AN O-ring boss threads for optional anodized adapter fittings in your choice of -8 AN, -10 AN, or -12AN lines * Depending on application, includes port(s) for oil sensors or turbo oil supply * Includes all necessary hardware * Limited lifetime warranty
( 10 )
$139.00
—
$209.00
Proform high-torque starters are 100 percent new, not rebuilt. They feature an offset design that results in more clearance between the oil pan and the starter. The powerful units are offered in a variety of styles, finishes, and other options for both manual and automatic transmission applications. These replacements are available for countless vehicles from the 1950s and up.
( 113 )
$202.99
Chevrolet Performance has the official parts that your classic vehicle needs to keep it in pristine condition, including these head gaskets, which offer a precision fit between the cylinder head and header to improve exhaust flow. These head gaskets feature durable quality construction to maintain a reliable seal under high pressure and temperature changes. Whether you're installing a new set of heads or are just reinstalling your stock factory manifolds, add Chevrolet Performance head gaskets to ensure a precision fit and a tight, leak-free seal.
( 26 )
$203.46
—
$215.31
Reduce vibration and extend the life of your engine's components and accessories with Advance Adapters top-quality, proven-design motor mounts. For some of the bases that require welding, a temporary bolt-on solution allows you to drive your vehicle to the welding shop of your choice. Select the Advance Adapters engine swap motor mounts designed for your vehicle application.
( 124 )
$146.76
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 185 )
$269.99
These UMI Performance tunnel brace torque arm mounts are designed to get the most out of your car. They are engineered to be stronger than the stock mount without adding excessive weight or bulk under your car. To make installation easy, UMI offers different offsets to clear the exhaust and specially designed them to bolt up to the factory location without needing to be welded in. These tunnel brace torque arm mounts are constructed from steel and are powdercoated to protect them from the harsh elements under your car. UMI Performances tunnel brace torque arm mounts are perfect to help you get your car off the line and down the track faster.
Not Yet Reviewed
$229.99
Trans-Dapt Performance universal street rod-style motor mounts are available for a wide variety of cars and trucks with open frame rails. They install easily—simply bolt the mounts to the engine, measure the distance between the frame rail and the mounts, and then trim the frame mounts to fit. Depending on the model you order, these kits feature a weld-on design, engine mounting brackets, frame mounting brackets, urethane or rubber bushings, and mounting hardware. They're available in a variety of motor mount styles; find the one tailored for fitment on your vehicle.
( 35 )
$164.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
