Availability
Showing In Stock Items. Show All 31 Items.
FiTech offers replacement fuel rails for a variety of applications, including EFI and LS fuel injection systems. Order the FiTech fuel rails that are best suited for your setup.
Not Yet Reviewed
$114.00
On Sale
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 26 )
$150.00
—
$266.00
$135.00
—
$239.40
On Sale
FiTech throttle bodies provide high-flow for your LS engine. They are built with cast aluminum construction and include the IAC motor. They are offered in two low-profiles with diameters of 92mm and 102mm available.
( 51 )
$192.00
$172.80
FiTech offers a variety of accessories and components for Go EFI Systems including oxygen sensors. These sensors are for replacing or upgrading existing parts and help to keep your vehicle running at top performance with long-term durability and reliability. Maintain fuel efficiency and emissions standards with the FiTech oxygen sensor best suited for your application.
( 6 )
$111.00
Whether you want to add an automatic transmission to your vehicle with a FiTech fuel injection system or need to replace a damaged harness, FiTech transmission control harnesses get the job done. Repair or customize your vehicle's sensor layout the proper way with the FiTech transmission control harness designed for your application.
( 1 )
$153.00
On Sale
Racing takes its toll on vehicles much faster than regular driving. Engines, tires, and fuel systems all have short life expectancies when attached to high performance vehicles. FiTech replacement in-tank fuel pumps free-flow 340 lph (89 gph) and get your Go EFI Fuel Command Center sump kits back on track.
( 2 )
$150.00
—
$179.00
$135.00
—
$161.10
On Sale
FiTech Go Fuel regulators allow you to set the fuel pressure precisely where your EFI system and engine require. The regulators are able to handle high-flow fuel pumps, can be adjusted from 30 to 70 psi, and can support up to 1,000 hp on gas engines. Crafted from billet aluminum, FiTech regulators feature -6 ORB ports, a vacuum/boost port, and they will accept a pressure gauge. They are offering two models, a compact unit with a single outlet and a larger, dual outlet version.
( 2 )
$127.00
—
$171.00
$114.30
—
$153.90
On Sale
FiTech replacement handheld controllers will get you back up and running quick when the worst happens. If you lose or break your controller you can be out of luck updating your tuning or diagnosing an issue with the fuel injection system, but FiTech has you covered with their replacement controllers. All controllers come with the correct firmwear for your fuel injection system.
( 18 )
$167.00
$150.30
On Sale
FiTech offers a line of stylish valve covers for LS-based engines. They provide a sleek, polished look that complements any engine bay, making them the perfect choice for those looking to enhance the visual appeal of their vehicle. The aluminum covers are crafted to deliver a custom look without compromising on compatibility. Select the size, style, and finish you prefer. Sold in pairs.
Not Yet Reviewed
$175.00
—
$292.00
$148.75
—
$248.20
On Sale
FiTech Go-Spark CD ignitions enhance the performance of fuel injected or carbureted engines. The high-output multi-spark technology ensures complete combustion and improves drivability by delivering full energy sparks from idle through high-rpm. Optimize your EFI or carb ignition setup with FiTech Go-Spark CD ignitions. Features and specs: * One sealed connector for a clean installation * Multi-spark to 2,500 rpm * Maximum 10,000 rpm
( 4 )
$222.00
$188.70
FiTech Go EFI Tri-Power linkage kits are designed for exclusive use with their Go EFI Tri-Power 600 hp system. They provide an effective linkage solution for the unique challenges of using this retro-style setup. Complete your awe-inspiring six-pack build with a FiTech Go EFI Tri-Power linkage kit.
Not Yet Reviewed
$116.00
On Sale
Enjoy better reliability and performance with FiTech Go-Spark ceramic spark plug wire sets. Each spark plug is preassembled from ceramic and carefully crafted with the proper end angles in mind, sparing you the hassle of custom trimming. Select the spark plug wire set designed for your application needs.
( 1 )
$120.00
—
$135.00
$102.00
—
$114.75
On Sale
Maximize your engine's potential with the FiTech Go-Spark ignition box and coil kits! You've got the fuel, now upgrade the spark with the FiTech Go-Spark Capacitive Discharge Ignition! The Go-Spark CDI produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. The Go-Spark CDI was designed for 4, 6, and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tach. Plus, high-energy coil enhances CDI performance. Go-Spark CDI features: * Produces series of sparks below 2,500 rpm * Boosts starting power, idle quality, and throttle response * High energy coil enhances CDI performance * Delivers full energy sparks through racing rpm * Ensures complete combustion of fuel mixture * Accepts Trigger Signal from variety of distributors (distributor not included) * Usable with separate 12-volt Square Wave Tach Output
Not Yet Reviewed
$269.99
$229.49
On Sale
FiTech Go-Spark distributors feature 2-wire magnetic pickups, compact bowl and cap designs to fit into locations where a larger or bulkier distributors will not, and adjustable advance systems, vacuum and/or mechanical, that allow you to dial in a timing curve for any high performance need or for more economy when cruising at light loads on the street or highway. CNC-machined housings, centerless ground shafts, Oil-Lite bushings, hardened drive gears, and FiTech's 3-year limited warranty make Go-Spark distributors very popular. Choose one for your vehicle. Features: * CNC machined 6061 T-6 aluminum housing * Centerless ground shaft that rides on an upper sealed roller or ball bearing * Extended length lower bronze Oil-Lite bushing for smooth operation at high rpms * Melonized or hardened iron drive gear ensures long service life * High-output magnetic pickups and paddle wheel reluctors ensure strong, stable trigger signals—even at higher rpms * Cap and rotor are 30 percent glass filled polyester (PBT) that offers high-impact and dielectric strength, and resistance to carbon tracking * Cap contacts are brass, the rotor spring is stainless steel for long-term maximum conductivity * Dual 2-wire magnetic pickup models available--pickups are placed 180 degrees apart to provide a complete redundant ignition system for racing applications * Height adjustment for deck height differences (not all Go-Spark models)
Not Yet Reviewed
$199.00
—
$285.00
$169.15
—
$242.25
On Sale
FiTech Go-Spark HEI distributors are very popular choices for street cars, hot rods, trucks, circle track racers, as well as industrial and stationary engines. The coil in-cap design offers a simple, clean installation and reliable operation. Plus, FiTech has addressed all the shortcomings typically found in economy replacement units. FiTech HEI distributors feature: * High performance 5.8 amp dwell limit module--standard GM 4-pin configuration * High-output, performance wound (130:1 high-turns ratio) coil ensures maximum spark energy at all rpm levels * Cap and rotor are molded in high-quality 20 percent glass filled polyester (PBT) that offers high-impact and dielectric strength while resisting carbon tracking * Cap contacts are brass and the rotor spring is stainless steel for long term maximum conductivity * CNC-machined aluminum housing * Centerless ground shaft rides * Extra-long lower bronze Oil-Lite bushings for smooth operation at high rpms * Mechanical advance is welded to the top of the shaft and is plated to reduce friction and prevent corrosion * Melonized iron drive gear ensures long service life * Adjustable vacuum advance allows increased economy while under light load
Not Yet Reviewed
$209.00
$177.65
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 29 )
$133.00
Lokar throttle cable brackets provide a performance-grade mounting option to match your fuel system. They're offered in a wide range of designs and finishes to assure proper fit, form, and function. The brackets are offered as individual components, or in kits with as little/much as you need. They're available in universal or application-specific options.
( 489 )
$105.95
Manufacturer Rebate
These Sport-Comp II tachometers feature intense "through-the-dial" white LED lighting and a brilliant LED-lit pointer for maximum visibility. These tachs are styled after the classic AutoMeter Sport-Comp series, the trademarks of the entire AutoMeter line. With rugged race styling and unmatched performance, Sport-Comp II tachometers are available in pedestal mount and in-dash versions.
( 26 )
$191.99
Tanks Inc. universal fuel line kits include 25 ft. of line and all or most of the fittings that you need to plumb your fuel system when using a Tanks Inc. fuel pump. The kits will give you all the fittings needed to plumb a FI-Tech system and most fittings to plumb systems that use an external fuel regulator, such as MSD Atomic, Holley Terminator, or FAST EZ-EFI. Tanks Inc. universal fuel line kits include: * Fuel filter * Two quick-disconnect fittings for fuel filter * Two 1/4 in. NPT to -6 AN fuel pump adapter fittings * Six -6 AN straight Twist-Lok fittings * 25 ft. -6 AN black Twist-Lok fuel hose
( 19 )
$174.99
—
$184.99
Protect your engine and keep your carburetor breathing clean with the Turbo-Guard race carburetor guards—the ultimate debris-blocking solution for performance builds. Designed to stop rocks, track debris, and large particles from entering your intake, they are built for serious power and protection. Precision crafted from high-strength stainless mesh and paired with a billet aluminum housing; these race carburetor guards are lightweight, durable, and made to handle high-horsepower applications. Whether you're running a dragster, street rod, or dirt racer, they add a layer of defense without restricting airflow. They are also easy to install and designed to fit most standard carburetor inlets. Take control, stay protected, and boost performance with Turbo-Guard Race Carb Guards! Key features: * High-strength stainless mesh and paired with a billet aluminum housing—built to survive the harshest conditions * Perfect for Holley, Edelbrock, and other aftermarket carbs * Fits Carb style EFI like Killshot, FiTech, Bandit, Holley Terminator or Sniper, Wildcard * Blocks harmful debris without choking your moto
Not Yet Reviewed
$169.99
—
$189.99
Quality you can see, power you can feel—Vertex Replica piston kits are choice replacements for precision performance. Available in 2- and 4-stroke, the Replica piston kits feature both cast and forged manufacturing processes, supplying the highest quality to meet your needs. And, Vertex offers A, B, C, and D sizes, so you can choose the proper fit for your cylinder. The difference in the sizes is 0.01mm (0.0004 in.) increments, with A being the smallest and D the biggest. Vertex Replica piston kit notes: * 2-stroke piston kits are gravity cast aluminum alloy with 18 percent silicone content, which produces an extremely light but very strong piston * 4-stroke pistons are forged from 2618 or 3032 alloys for superior strength and durability * All pistons are heat-treated with a T-5 hardening and tempering cycle * All piston skirts are treated with a high-tech molybdenum disulfide (MOS2) coating for faster break-in time and increased piston life * Standard pistons and rings are OEM replacements * Kits include piston, rings, wrist pin, and circlips
Not Yet Reviewed
$127.46
—
$214.16
Vertex top-end piston kits are OEM-style replacements. These kits include everything needed to rebuild a top-end for the specific application selected. When applicable, the wrist pin bearing included is DLC-coated for added longevity. All piston skirts are coated with a high-tech molybdenum disulphide coating for faster break-in and increased piston life along with a T-5 hardening cycle. Rebuild your top-end without worries with Vertex top-end piston kits.
( 3 )
$243.06
Vertex offers Big Bore piston kits for a variety of applications, including Kawasaki off-road bikes from the 1990s and up. All pistons are heat-treated with a T-5 hardening and tempering cycle, and all piston skirts are coated with a high-tech molybdenum disulphite coating for faster break-in time and increased piston life. Cast piston kits are gravity cast aluminum alloy (not forged) with 18 percent silicone content—which produces an extremely light but very strong piston. Forged pistons are forged from 2618 aluminum for superior strength and durability. Forged high-compression pistons improve power and torque across the entire RPM range. Big Bore pistons increase engine displacement, torque, and peak horsepower. Forged Replica pistons are forged OE replacements. Replica pistons and all rings are OEM replacements.
Not Yet Reviewed
$205.66
—
$242.06
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$117.75
—
$179.30
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
