Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
45 Results Found For "Mallory"
Showing In Stock Items. Show All 52 Items.
Scat Mallory Heavy Metal
Scat Mallory heavy metal helps you balance performance. Scat offers these machined dense metal essentials in a selection of diameters and lengths. Balance your rotating assembly by adding Mallory heavy metal to your crankshaft.
( 1 )
$100.99
—
$146.99
Mallory Promaster Classic Series Coils
These Promaster Classic series ignition coils from Mallory are designed to meet today's specialized ignition requirements. These coils feature a faster rise time and increased spark duration (compared to stock) to increase performance. They have a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This series also offers better wire retention with a spark plug type secondary post, and brass contact terminals.
( 44 )
$204.95
On Sale
Mallory Pro Sidewinder Spark Plug Wire Sets
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 34 )
$199.95
$133.20
—
$153.70
Mallory Fuel Pump Service Part Kits
Bring your Comp Pump back to life with genuine Mallory fuel pump service part kits. From seal and repair kits to brush kits, Mallory has the parts that you need to put your fuel pump back into action.
( 14 )
$161.95
Mallory Replacement Ignition Modules
Mallory Replacement Ignition Modules are designed to replace the malfunctioning module. They are direct replacements for the modules provided in Mallory distributors and conversion kits. With an easy three-wire hookup, these modules will have your vehicle's ignition working great in no time.
( 117 )
$115.95
—
$141.95
Mallory Fuel Pressure Regulators
When using high-pressure fuel pumps, a fuel pressure regulator must be installed to prevent carburetor flooding. Mallory fuel pressure regulators feature housings fully machined from 6061 T-6 billet aluminum, and specially designed high-flow fuel passages. Combined with a quick-acting diaphragm assemblies, it makes them extremely efficient. A mounting bracket is provided to allow quick and easy mounting.
( 8 )
$245.95
Mallory Circuit Guards
Mallory circuit guards combine the protection of the Mallory active power filter from power spikes and surges and other electrical "noise," with the negative spike protection offered by the Mallory power cell. They are designed to plug right in and can even be mounted directly on most distributors. These circuit guards offer great protection for all Mallory UniLite, MBI, and E-Spark modules.
( 14 )
$130.95
On Sale
Mallory Unilite Breakerless Ignition Conversion Kits
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$176.95
$100.16
—
$152.95
Mallory Marine Distributor Caps
Mallory Marine distributor caps are made from high-luster, premium-quality, glass-filled polyester. These caps provide excellent dielectric strength and resist carbon tracking. Their Marine-grade brass terminal inserts resist corrosion and provide excellent conductivity.
( 4 )
$101.95
Mallory HyFire V Ignitions
Mallory HyFire V ignitions offer a modern twist on a familiar name! Needing no introduction, the HyFire ignitions feature modern electronics ready to deliver a powerful punch packed inside retro-style cases. These capacitive discharge ignitions supply multiple sparks at low rpm for a clean idle and quick throttle response. And since the HyFires provide powerful spark through redline, a built-in adjustable rev limiter will help tame your beast in case of a missed shift or driveline failure. The rev limiter is adjustable in 100 rpm increments with easily adjustable rotary dials. Features include: * Modern capacitive discharge ignition technology * Retro design for classic good looks * Connects easily to points, amplifiers, and magnetic pickup distributors * Adjustable rev limiter for over-rev protection * Multiple sparks at low rpm for improved starting, clean idle, and snappy throttle response
( 11 )
$249.99
Mallory E-Spark Conversion Kits
These Mallory E-Spark conversion kits are just what you needed to replace those old points and update your ignition system. They eliminate the pesky problem of constantly having to change and adjust points. These kits include all parts that fit inside the stock distributor cap, so everything is self-contained and looks original from the outside.
( 28 )
$163.95
Mallory Distributor Caps
Mallory constructed these distributor caps from innovative, space-age plastic. Mallory distributor caps combine the high dielectric strength required for today's high-energy ignition systems with highly impact-resistant qualities to prevent damage.
( 106 )
$120.95
On Sale
Mallory Marine Electric Fuel Pumps
Mallory Marine electric fuel pumps deliver a constant flow of gasoline to the engine to help prevent vapor lock. They are manufactured from quality materials and components to ensure increased durability and longer life. The fuel pumps are available in a variety of configurations to fit your specific marine engine application.
( 2 )
$299.95
$199.50
Mallory Bronze Distributor Gears
These bronze distributor gears from Mallory are recommended for steel billet mechanical roller tappet cams and slot hard-faced steel billet mechanical flat tappet cams. Bronze gears absorb the increased wear in special cams and magnetos and are easily replaced before costly damage to the camshaft gear occurs. The gears are precision-machined from the highest quality aluminum silicon bronze alloy for maximum durability. Bronze distributor gears must be checked often and replaced as needed.
( 1 )
$113.95
—
$130.95
ACCEL Motorcycle Mallory Replacement E-Spark Modules
ACCEL Motorcycle Mallory replacement E-Spark modules can be used to replace older UniLite and E-Spark modules currently used in Mallory distributors and conversion kits. They come complete with installation instructions and coil recommendations.
( 2 )
$114.95
PerTronix Ignitor® Solid-State Ignition Systems
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1010 )
$120.54
—
$219.58
PerTronix Industrial Distributor Replacement Modules
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$106.05
—
$109.76
PerTronix Ignitor II® Solid-State Ignition Systems
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$201.55
—
$222.32
Sierra Marine Electronic Ignition Conversion Kits
Sierra Marine electronic ignition conversion kits replace the points and condensers for true solid state ignition performance. The kits quality components meet or exceed the original equipment parts they replace, and are engineered to meet today's high horsepower engine demands while withstanding the harsh marine environment. For quality parts for your boat repair and maintenance, Sierra is dedicated to protecting your investment. Order the conversion kit suited to fit your application needs. Electronic ignition conversion kit features: * Uses standard coil, cap and rotor * Easy to install, one-piece, 2-wire hook-up * Accurate to within 1/4 degree timing accuracy 0 to 6000 rpm range Note: Before ordering, please verify this is the correct kit to suit your specific application requirements.
Not Yet Reviewed
$154.99
PerTronix Ignitor® and Ignitor II® Replacement Modules
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$109.76
—
$165.24
Sierra Marine Thermostat Housings
Sierra Marine thermostat housings are quality replacement housings made to meet and exceed the factory standards. Each housing is constructed from quality materials and made to be a direct replacement to your engine. Replace your worn out housing with a Sierra Marine thermostat housing today.
Not Yet Reviewed
$207.99
On Sale
MSD Cap-A-Dapts
MSD Cap-A-Dapts have HEI-style posts, an adjustable rotor to allow proper phasing (Chevy and Mallory YL only), and wider post spacing to prevent crossfire and ionization. The kits include a high-quality cap with brass terminals, a rotor, and a cap spacer.
( 46 )
$129.95
$116.95
—
$232.95
Tuff Stuff Performance Marine Starters
Tuff Stuff Performance offers a variety of GM-style marine starters—which can serve as replacements for many factory models, including Mercury, Chris Craft, Mallory, Sierra, Volvo, OMC, Arco, MES, and more! The high-torque starters are hand-made from premium quality new components, not remanufactured. They're 100 percent load tested to meet or exceed OEM specifications—and provide more efficient, long-term dependability.
Not Yet Reviewed
$200.99
—
$236.99
Sierra Marine Powerhead Gasket Sets
Sierra Marine offers a wide range of watercraft replacement parts—including these complete powerhead gasket sets. They contain a variety of composite seals to rebuild, repair, or maintain the power-producing part of your motor, Powerheads consist of parts like the block, heads, crankshaft, pistons, connecting rods, and valves. The OEM gasket kits ensure correct fit and performance; and they're available for marine makes such as OMC, GLM, Mallory, Mercury, Johnson/Evinrude, and Yanmar.
Not Yet Reviewed
$106.99
—
$179.99
