Availability
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$227.95
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 56 )
$257.99
$109.99
—
$242.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$340.99
$180.99
—
$275.99
BluePrint Engines dual plane intake manifolds are perfect to top any 302 based engine. Capable of supporting over 400 hp, these cast aluminum replacements are a perfect match for BluePrint HP9008 and HP9009 headed engines, or Windsor iron headed engines. The manifolds are a great addition to performance heads. Bolts and gaskets are included. Additional details (P/N: MLL-BPP302INT): * Engine block style: SBF 302, Stock/OEM standard deck * Cylinder head style: Windsor * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 5.813 in. * Intake finish: Natural * Note: This intake manifold features Windsor intake bolt pattern. This is the production intake manifold used on BluePrint SBF engines 302-347 c.i.d. May not be compatible with OEM chokes or OEM accessory mounting brackets. Does NOT fit 351W based engines, Cleveland, or GT40 applications.
( 6 )
$215.95
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$399.95
$219.95
—
$251.95
BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.
( 3 )
$215.95
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
—
$260.99
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 230 )
$198.99
—
$239.99
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 833 )
$214.99
$172.99
—
$269.99
BluePrint Engines muscle car swap air intake kits are designed to provide proper frequency and location of the mass airflow sensor used with GM controllers. They have been tested on throttle bodies from 80mm to 102mm, and each kit includes filter, tube, MAF receptacle, block-off, clamps, couplers, and hardware. Features and specs: * Red, oil-less cotton gauze washable filter * Total height from base is 7 in. * 4.750 in. black silicon cap * 6 in. inlet * Aluminum intake tube with 97.5mm I.D. * Five stainless steel hose clamps * Tube-to-filter adapter * Three silicon couplers * Silicon clean air hose * Vacuum cap * MAF block-off plate, gasket, and hardware Note: May require modifications based on the wide applications that BluePrint's engines are installed into. Custom installation and modifications, such as drilling a hole for intake air temp on some models.
Not Yet Reviewed
$129.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$349.99
—
$429.99
$249.99
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 437 )
$188.82
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$281.95
Our Summit Racing™ Stage 2 cast aluminum, dual-plane intake manifolds have a high-rise design with long, separated runners to deliver power gains in the 1,500-6,500 rpm range. They're a great addition to performance heads! These non-EGR manifolds have a square bore flange and a natural finish. Chevrolet intakes will clear HEI ignition systems.
( 57 )
$235.99
—
$243.99
Summit Bucks
ACDelco GM Genuine Parts intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are GM recommended replacements for your vehicle's original component. They are manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you expect from General Motors.
( 21 )
$100.99
—
$259.99
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 52 )
$299.95
$224.95
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$160.99
—
$276.99
$144.89
—
$249.29
On Sale
The Cyclones are Professional Products' lowest profile small block Chevy manifolds and are also the only ones that are street-legal on pollution-controlled vehicles. Cyclone manifolds are set up to accept a spread bore carb, but come with an adapter plate that permits the use of square bore carbs. To remain street-legal with a square bore carb, you must use one that is also approved as street-legal for your application. These Professional Products Cyclone manifolds are available in a variety of configurations to suit your needs.
( 29 )
$135.99
—
$241.99
$122.39
—
$217.79
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$262.99
$159.99
—
$249.99
On Sale
These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications, these are among the best manifolds that you can use. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.
( 13 )
$167.99
—
$283.99
$151.19
—
$255.59
Although the Series 2 Cold Air Intake kits have been a huge success, JLT Performance engineers have outdone themselves again by creating the Performance Series 3 Cold Air Intake kits. The new Series 3 Cold Air Intake kits feature a 4 1/4 in. I.D. roto-molded plastic tube designed to resist engine heat and keep the intake air charge nice and cool. With having a 110mm MAF molded right into the tube, airflow is fast and smooth. Horsepower gains of up to 20-30 hp are typical when the JLT Performance Series 3 Cold Air Intake kits are installed with the required proper tuning. Order the model recommended for your vehicle.
( 2 )
$259.00
On Sale
These Hurricane intake manifolds are one of Professional Products' very most popular race manifolds. If you are looking for the utmost in performance for the very least amount of cost, then these manifolds are for you! The base Hurricanes are terrific manifolds for budget engines such as claimer motors.
( 23 )
$184.99
—
$286.99
$166.49
—
$258.29
On Sale
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$219.95
—
$329.95
$175.99
—
$263.99
On Sale
Spectre muscle car cold air intake kits deliver the power-increasing technology that race cars and modern cars have employed for some time. A company rooted in racing with a definite bias toward early muscle cars and speed, Spectre has designed simple, universal cold air intake systems for your specific ride. Available for many applications, these intake kits let you choose the location to draw the cold air from—the wheel wells, cowls, front gravel shields, or even the high-beams—with the optional headlight scoops. The more cold air you take in, the more power you make. Spectre cold air intake kits help to reduce the incoming air temperature by introducing fresh cold air to the engine for incredible power gains; and since your engine won't need to work as hard, there's the added benefit of improved gas mileage. Order the model designed for your muscle car application.
( 32 )
$249.99
$157.99
—
$269.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
