Availability
Showing In Stock Items. Show All 87 Items.
On Sale
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 288 )
$217.95
—
$249.95
$196.15
—
$224.95
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1238 )
$115.99
—
$269.99
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 166 )
$126.99
—
$244.99
FAST XDi Street HEI distributors include the industry-first gear technology with an upgraded module and coil that ensure clean ignition firing up to 8,500+ rpm. Ideal for SB and BB Chevy engines, each of the XDi distributors feature a plasma nitrided gear compatible with all popular camshaft materials, including cast iron, austempered iron, 5160 steel, and even 8620 steel. The special plasma nitride process used on the gears not only increases the gear's surface hardness, but also the "slickness" of the gear teeth reducing friction and increasing cam/distributor gear life, as well as making them superior to common melonized gears. XDi Street HEI distributors also feature powerful 6-amp ignition modules that drive custom-wound performance coils up to 50,000 V, providing the hot spark needed for maximum horsepower. While ready to run out of the box, for those that enjoy tuning the mechanical and vacuum advance mechanisms for better throttle response and fuel economy, FAST XDi Street HEI distributors include springs, advanced limit plate, and instructions needed to adjust the distributor for your particular engine/vehicle combination.
( 21 )
$191.95
Proform's Race HEI distributors are the real deal. They're designed to meet the high-performance demands of racing and keep on ticking. The distributors are built with 100 percent new parts, including the housing for guaranteed durability. They come in your choice of polished or unpolished aluminum housings, and four different cap colors. This distributors produce a 50,000 V spark through 7,500 rpm, for an enormous increase over OE HEIs. Also included are a 50 V coil, true spark alignment for instantaneous response, a high-performance curve, a premium cap with brass terminals, and a low-saturation ignition module.
( 82 )
$100.99
—
$124.99
SQR Performance is setting a new standard in performance automotive parts with modern design and manufacturing processes that exceed expectations, and provide quality upgrade components you can count on. SQR Performance HEI distributors feature CNC-machine aluminum bodies, high-temperature, glass-filled thermoplastic caps with brass terminals, and an easy one-wire installation. Choose one for your build. Additional features: * 65,000 V coil * Hardened-steel gear for long life * Fits small block and big block Chevrolet engines (standard deck height) * Adjustable vacuum advance
Not Yet Reviewed
$179.99
On Sale
Scott Drake offers Street/Strip HEI distributors for a wide range of applications, including many Ford and Mercury cars, trucks, and vans from the 1960s, '70s, and '80s. These units are designed for the enthusiast looking to replace outdated points or a stock distributor with a dependable high-energy ignition distributor. Converting to an HEI system makes installation and set-up easy. Just drop it in and connect two wires—it's that simple! This high performance distributor features a 50,000 V coil that delivers 2x the energy across the spark gap compared to a stock HEI distributor. It will fit all 1964-84 Ford 302 motors (will not fit 1985 and later 5.0L/302 roller engines, and will not clear stock air cleaners).
Not Yet Reviewed
$149.95
$134.95
If you're looking to upgrade your stock HEI, Allstar Performance HEI distributors are perfect replacements. They have high-output coils and adjustable vacuum advances. Housings are manufactured from CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at your higher rpm. Allstar HEI distributors include snap-on spark plug wire retainers and instructions for a trouble-free swap of your old stock piece.
Not Yet Reviewed
$164.99
On Sale
FiTech Go-Spark HEI distributors are very popular choices for street cars, hot rods, trucks, circle track racers, as well as industrial and stationary engines. The coil in-cap design offers a simple, clean installation and reliable operation. Plus, FiTech has addressed all the shortcomings typically found in economy replacement units. FiTech HEI distributors feature: * High performance 5.8 amp dwell limit module--standard GM 4-pin configuration * High-output, performance wound (130:1 high-turns ratio) coil ensures maximum spark energy at all rpm levels * Cap and rotor are molded in high-quality 20 percent glass filled polyester (PBT) that offers high-impact and dielectric strength while resisting carbon tracking * Cap contacts are brass and the rotor spring is stainless steel for long term maximum conductivity * CNC-machined aluminum housing * Centerless ground shaft rides * Extra-long lower bronze Oil-Lite bushings for smooth operation at high rpms * Mechanical advance is welded to the top of the shaft and is plated to reduce friction and prevent corrosion * Melonized iron drive gear ensures long service life * Adjustable vacuum advance allows increased economy while under light load
Not Yet Reviewed
$209.00
$177.65
Davis Unified Ignition street/strip coil kits are capable of 7,000 rpm! The higher voltage output of these coil kits allows you to widen your spark plug gap up to .055 in. The wider plug gaps allow major spark energy into the combustion chamber for a better burn of the fuel mixture and increased horsepower. Due to the high-voltage output of the coils, a burn-through resistant brass terminal rotor is included, as well as nylon rotor screws to prevent misfires at extreme rpm. D.U.I. race coils are installed in your choice of colors, including a cool clear style so you can watch the sparks fly.
( 102 )
$105.99
Breathe some new life into your GM HEI distributor with one of these Proform GM HEI distributor tuneup kits. They include everything you need. Features include: * 50,000 V coil * "No-arc" rotor * Coil dust cover * Low-saturation module * Adjustable vacuum advance unit * HEI bushing * Wiring harness and capacitor * High performance advance springs and weights * All necessary mounting hardware
( 23 )
$107.99
Davis Unified Ignition race coil kits are capable of 10,000 rpm--that's almost twice the output of a stock HEI coil! The higher voltage output of these coil kits allows you to widen your spark plug gap up to .055 in. The wider plug gaps allow major spark energy into the combustion chamber for a better burn of the fuel mixture and increased horsepower. Due to the high-voltage output of the coils, a burn-through resistant brass terminal rotor is included, as well as nylon rotor screws to prevent misfires at extreme rpm. These D.U.I. race coils are installed in your choice of colors, including a cool clear coil so you can watch the sparks fly.
( 9 )
$109.00
—
$119.00
On Sale
PerTronix Flame-Thrower tuneup kits not only make your tired stock HEI distributor young again, they make it better than it was before. The upgrade kits include many of the same components that make up PerTronix's powerful Flame-Thrower distributor: A 50,000 V coil and module; an alkyd cap and rotor; an adjustable vacuum advance canister; a high-performance advance kit; a wiring harness; a capacitor; and hardware. Order the model recommended for your year/make and engine application.
( 50 )
$179.30
—
$214.80
$161.37
—
$193.32
ACCEL HEI tune-up kits include everything needed to rebuild your stock GM HEI distributor. They include a distributor cap with brass contacts, steel rotor, 60,000 V ignition coil, 4-pin ignition module, vacuum advance kit, wiring harness, hardware, and dielectric grease.
( 10 )
$191.95
Convert your dated ignition system to modern HEI technology with CA Corvette HEI tach drive distributors. With this simple distributor swap, you can get all the benefits of HEI technology, plus performance enhancements. Compared to what your vehicle originally came with, this HEI tach drive distributor will give you the firepower you need for your Corvette's ignition.
Not Yet Reviewed
$119.99
American Autowire HEI harnesses transform your points ignition to an electronic HEI. They provide an original appearance with an upgrade in performance for your classic. Enhance your ride with the American Autowire HEI harness best suited to fit the application.
( 1 )
$154.85
—
$157.70
The GM licensed distributors by Proform will give your engine the power and stability that is needed. Proform manufactures these distributors from quality to materials to ensure performance and durability. Other features includes the following: * High performance control module * Melonized steel gear * Sintered steel weights for lighter weight and durability * Adjustable vacuum advance * Bronze sintered bushings * Capacitor that prevents radio static * High-dielectric cap with brass terminals * Premium rotor (except where otherwise specified)
( 26 )
$195.95
BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No
( 5 )
$219.95
—
$229.95
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 255 )
$165.50
—
$238.15
$148.95
—
$214.34
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 165 )
$188.99
—
$269.99
BluePrint Engines Pro Billet 2-Wire distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and mechanical advance. An ignition box is required for use. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Mechanical Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No
Not Yet Reviewed
$219.95
Allstar Performance ready-to-run distributors deliver point-style size and vacuum advance with electronic ignition technology. They're perfect for early GM cars without clearance for an HEI. The distributor housings are made of CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at higher rpm. Allstar ready-to-run distributors can use any external stock or performance coil, and they fit small and big block Chevys (except 348 and 409). Distributors include: * Vacuum advance lockout * 3-pin wire harness * Advance springs * Advance stop bushings * Manifold gasket * O-rings * Spark plug wire retainer cap with screws * Instructions
( 1 )
$271.99
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 202 )
$100.99
—
$156.99
On Sale
Crown Automotive distributors deliver accurate trigger signals. When it's time to improve your ignition system, you can rely on Crown for quality direct-fit replacement parts. These distributors are constructed of cast aluminum housings and steel gears, magnetic or points-style triggers, and most have caps included. Hook one up to deliver the voltage from your coil to the spark plugs for reliable ignition!
( 18 )
$125.99
—
$133.99
$113.39
—
$120.59
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
