Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
850 Results Found For "70"
Showing In Stock Items. Show All 1224 Items.
Not Showing Customizable Items. View Customizable Items.
U.S. Wheel 70 Series Bright White 8-Spoke Wheels
U.S. Wheel 70 Series bright white 8-spoke wheels are painted with blue and red pin stripes around the outer edge. They are available in many sizes and bolt patterns. Lug nuts and center caps are sold separately.
( 10 )
$102.99
—
$122.99
On Sale
Flowmaster 70 Series Big Block II Mufflers
These 70 Series Big Block II mufflers are designed around a large case for maximum volume and efficiency. They're 2 in. narrower than the original Big Block muffler, making them easier to install into tight areas. Other features include a mild, mellow exhaust tone and a resonant tuning chamber for reduced interior sound levels.
( 124 )
$249.95
—
$255.95
$224.95
—
$230.35
U.S. Wheel 70 Series White 8-Spoke Wheels
U.S. Wheel 70 Series white 8-spoke wheels are painted with blue and red pin stripes around the outer edge. They are available in many sizes and bolt patterns. Lug nuts and center caps are sold separately.
( 145 )
$109.99
—
$224.99
Lares Remanufactured Power Steering Control Valves
Lares takes care to clean their remanufactured power steering control valves thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent seals and O-rings; then they're tested to ensure proper performance. Lares also lubricates and applies a fresh coat of high-quality paint to the valves, so all you have to do is install them and go! Verify the fitment and order the Lares remanufactured power steering control valves designed for your application.
( 17 )
$186.99
Hawk Performance DTC 70 Brake Pads
Hawk Performance DTC 70 brake pads have extremely high torque with aggressive controllable initial bite. Their superior release and torque control characteristics are perfect for the high performance racing industry. DTC 70 brake pads were designed for cars with high deceleration rates with or without downforce. Order the set recommended for fitment with your caliper type.
( 20 )
$199.79
—
$245.69
U.S. Wheel 70 Series White VW Spoke Wheels
U.S. Wheel 70 Series VW spoke wheels are steel wheels with an 8-spoke design. They have a painted white finish with blue and red stripes on the outer edge and will give your VW a classic off-road look!
( 30 )
$124.99
—
$246.99
Ron Francis Wiring 70 Amp Single Electric Fan Relay Systems
Do you have a high performance cooling fan on your street rod, off-road machine, or custom vehicle? If so, then these Ron Francis Wiring 70 amp single electric fan relay systems are just what your vehicle needs to keep cool. Available in several sensor configurations, the 70 amp single electric fan relay systems feature a relay, Maxi fuse, and all of the necessary wires for a complete installation. These Ron Francis Wiring 70 amp single electric fan relay systems are sure to keep your engine operating at a cool and efficient temperature.
( 22 )
$108.73
Monroe Monro-Magnum 70 Shocks
Monroe Monro-Magnum 70 shocks are designed to deliver a firm, controlled ride for greater stability and increased driver comfort. They fit just about any medium or heavy-duty truck, tractor, trailer, or bus on the road today—and meet or exceed demanding OE manufacturer specifications. Their multi-lip fluid seal is designed for smooth performance, long life, and reduced friction. Additional features: * 2 3/4 in. reserve tube * Large 1 3/4 in. piston bore * Hardened 7/8 in. diameter piston rod * Resistance and arc-welded mounts provide 18,000 lbs. tensile strength for maximum durability (on most applications) * Patented unique hydraulic rebound lockout (when required) * Heavy-wall drawn over mandrel (DOM) pressure tube
Not Yet Reviewed
$100.99
—
$139.99
OER Authorized 1965-70 Chevy Tubular Control Arms
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1965-70 Chevy tubular control arms are engineered for maximum strength and visual impact. Designed as stock replacements, the arms capture both sides of the bushing, unlike the originals that only retained one side. This safety feature allows full control with virtually no flex on the control arm when cornering. They are available in pairs for upper or lower or as a set with both upper and lower control arms. Choose the ones you prefer.
( 2 )
$208.99
AFCO Racing 70 Series Monotube Gas Shocks
AFCO Racing 70 Series monotube gas shocks are designed to offer great consistency, using their monotube racing shock technology in stock mount shock applications. The 70 Series shocks are available in a wide variety of valving combinations to accommodate your car/track setups. AFCO Racing 70 Series monotube gas shocks feature: * Steel shock body * Externally filled, take-apart design * Easy gas pressure adjustments with fill tool (sold separately) * 1/2 in. diameter hard chrome piston rod * Great for street stock classes that allow taking apart shocks * Stock mount legal tie-bars and bushings and OEM-compatible hardware * 100 percent dyno-tested
Not Yet Reviewed
$189.99
RAM Assault Weapon 70 Series Clutch Discs
RAM Assault Weapon 70 Series clutch discs are designed for use in oval track applications. They are manufactured from patented Rametallic friction material and work only with 6.25 in. Assault Weapon clutch systems. Floater plates are sold separately and are required for installation. The RAM Assault Weapon 70 Series clutch discs use riveted-on disc pads for optimum holding power.
Not Yet Reviewed
$101.00
OER Authorized 1969-70 Mustang Rear Spoliers
OER Authorized 1969-70 Mustang rear spoilers are accurate reproductions of the original factory option. These kits enable you to replace or add a spoiler to your classic muscle car. The spoilers are produced from strong composite material and include adjustable metal pedestals, just like the original. They also come with bracketry and mounting hardware. Give your Mustang or Cougar the cutting-edge look of an OER rear spoiler.
Not Yet Reviewed
$174.99
Precision Replacement Parts Weatherstrip Kits
Precision Replacement Parts weatherstrip kits protect your vehicles interior from the outside elements and reduce noise levels while driving. The complete seal kits are made from OEM specifications to install and fit for an authentic appearance. Whether a classic or more modern car, truck, or SUV, Precision weatherstrip seal kits are available to replace your dried-out or cracked door weatherstripping.
( 18 )
$234.99
On Sale
Brothers Trucks Lowered Seat Brackets
Brothers lowered seat brackets are a must have for anyone who has noticed that the original seat position is too high in the cab. These brackets correct the line of sight through your windshield, pedal angles, seating position and overall comfortability of the stock bench seat. Brothers designed these seat brackets to solve all of these issues with minimal install time and effort. The brackets are designed to lower the seat approximately 2-inches. It was necessary to eliminate the factory sliding function in order to get the desired drop, so Brothers corrected this by adding slotted mounting holes to allow 1 1/4 in. fore and aft adjustability (fits low hump floor pan applications only). You're going to love the extra room this custom bracket set gives you! There are some differences in the seat factory seat brackets between truck models, so before ordering, please verify the seat brackets designed to fit your truck.
( 1 )
$157.95
$142.15
Goodmark Trunk Lids
Goodmark OEM-style trunk lids are designed to fit your vehicle with no modifications. These premium replacements are made of steel and feature a special rust-resistant EDP coating. Order the model recommended for your application.
( 47 )
$189.99
Hays Self-Aligning Throwout Bearings
Designed specifically for installations with clutch to transmission misalignment resulting in noise and vibration, Hays self-aligning throw-out bearings minimize these conditions. Clutch alignment can also vary due to normal wear and tear. Self-aligning bearings with their rugged performance characteristics are also a functional upgrade from standard bearings on older cars, when applicable.
( 4 )
$105.95
Goodmark Trunk Floor Pans
Goodmark offers trunk floor pans for hundreds of classic vehicles. These steel replacements are finished with a rust-resistant EDP coating and are ideal for repair or restoration projects. They're available in a wide range of sizes and configurations. Order the trunk floor pan recommended to fit your application.
( 95 )
$102.99
—
$221.99
On Sale
Hays High Performance Throwout Bearings
Hays high-performance throwout bearings are designed to withstand the high spring pressure and high-rpm conditions common to racing clutches. They're heat-treated and Blanchard-ground to ensure trueness.
( 18 )
$101.95
—
$112.95
Dakota Digital Electronic Fan Controllers with Bluetooth
Dakota Digital electronic fan controller with Bluetooth control provide the ultimate in flexibility. Meant to be a simple add-on in any application using an electric fan, the included 70 amp relay is enough for the most power hungry cooling fans. Fully programmable, Dakota Digital electronic fan controllers will work with your existing water temperature gauge, operating from the temperature sending unit already installed. A dedicated sending unit can be installed for applications without a water temperature gauge. Includes the following features: * Compatible with single fan, dual fan, or single two-speed fan applications * User-settable on and off temperatures * Key-off run time adjustable from 0 to 5 minutes * Works with many stock temperature gauge/senders * OBD-II compatible (with purchase of BIM-01-2) * Bluetooth enabled for use with mobile programming/setup app * LED readout for simple programming * Can be directly connected to a Dakota Digital plastic-control box instrument system when used in conjunction with BIM-compatible Dakota Digital instrumentation or a BIM-01-2 --Temperature and vehicle speed data transferred with one connection --Connection allows adjustable highway-speed fan shut off
( 51 )
$175.75
Goodmark Front Valances
Goodmark offers front valances for a wide range of classic vehicles from the 1960s and '70s. These replacements are available in a variety of materials, finishes, and configurations—all designed to factory tolerances for an easy install without modifications. For repair or restoration, order the valance recommended to fit your application.
( 11 )
$123.99
—
$229.99
Goodmark Tail Panels
Goodmark offers tail panels in dozens of OE-style configurations. These replacements are made from steel with a special rust-resistant EDP finish. They're designed to fit your vehicle with no modifications. Order the tail panel recommended for your vehicle application.
( 30 )
$145.99
—
$203.99
Goodmark Rear Valances
Goodmark offers rear valances for a wide range of classic vehicles. These stock-style replacements are made from steel and feature a special rust-resistant EDP coating. They're available in sizes and configurations to fit specific applications.
( 9 )
$190.99
—
$194.99
ATI Super Damper Harmonic Balancer Shells
ATI Super Damper harmonic balancer shells are specifically designed for high-rpm engines. Their proven elastomer is engineered and tuned to eliminate damaging crankshaft harmonics that cause parasitic horsepower loss. These damper shells are built to all-but-eliminate worn parts and timing problems. These are the shells only and must be used with an ATI hub, which is sold separately. Order the model recommended for your vehicle application.
( 18 )
$105.84
Goodmark Grille Assemblies
Goodmark grille assemblies are designed to fit in your factory location with no cutting, drilling, or modifications required. They're made from a variety of materials and are offered in more than a dozen attractive finishes. You can add new life to a classic truck or musclecar with a replacement grille or insert. Order the model tailored to your vehicle application.
( 40 )
$158.99
