Availability
Showing In Stock Items. Show All 55 Items.
Surplus units were widely used in fuel systems for decades. However, the surplus synthetic rubber seals are not always compatible with current hydrocarbon fuels and/or additives. Earl's has redesigned the original surplus valves with modern elastomers, which are not affected by most fuels and lubricants.
( 8 )
$127.95
—
$178.95
Aeromotive high-flow one-way check valves are designed to prevent back-flow with minimal pressure drop. AN O-ring male inlet/female outlet connections allow easy installation into a fuel pump outlet port without adding additional lines, hose ends, or fittings. They're ideal for use when preventing drainback after the fuel pump is turned off, or when dual pumps are employed and both pumps will not always be running together. CNC-machined from 6061-T651 billet aluminum alloy with a Type II bright dip anodized finish, the fuel check valves are available in multiple sizes.
( 11 )
$118.25
—
$145.35
Jaz Products flapper fill valves are made from cast aluminum with the standard 12-bolt hole pattern that can be used on any Jaz Products 12-bolt fuel cell. These flapper fill valves include a steel D-ring cap or a molded plastic cap for quick removal and easy filling. Both styles are IMCA acceptable. They are designed so that one of the 12 mounting holes is hollow with an easily removable mini plug cap to check the fuel level in your fuel cell. They also feature a spring-loaded flapper for roll-over protection.
( 2 )
$116.99
—
$159.99
Improved Racing high-flow flapper check valves are ideal for use in oiling systems (wet sump and dry sump), fuel systems, crankcase pressure ventilation systems, and more. Most check valve designs—including poppet check valves, ball check valves, diaphragm check valves, piston check valves, and others—are restrictive, resulting in a pressure drop across the valve even when fully open. Improved Racing's check valves use a flapper design, originally developed for military jet engine turbines, that swings completely out of the fluid's flow path, adding virtually no flow restriction. These check valves were further optimized for low restriction at high flow rates using flow simulation software—and were designed to exceed most military specification requirements. The valves have been tested at up to 1,000 psi of backflow holding pressure without catastrophic failures or excessive leakage. This allows Improved Racing to very safely rate these valves to hold 300 psi of backflow pressure under normal operating conditions with a very high factor of safety. For comparison, the military surplus flapper check valves tested failed catastrophically with complete pressure loss at less than 200 psi. This flapper-style valve has a very low cracking pressure of less than 0.05 psi. Every internal component (hinge, spring, hinge pin, and gasket core) is made from stainless steel to ensure long-lasting, reliable performance and compatibility with just about any fluid, including corrosive fluids. The check valve's gasket is made from FKM (Viton®) rubber bonded to a stainless steel core, giving it a high operating temperature of up to 302 degrees F. It's also highly chemical-resistant and compatible with all types of fuel. Improved Racing's check valves are available in multiple fitting sizes, and the inlet and outlet halves can be mixed and matched to create a completely custom valve. Features and specifications: * Flapper design allows for very high flow with low restriction * Design optimized using flow simulation software * FKM (Viton®) rubber seal * All stainless steel internal components for compatibility with a wide range of fluids * 6061-T6 billet aluminum body with black MIL-A-8625 Type II anodized finish * Laser marked with flow direction and hinge location per military specification * Maximum operating backflow holding pressure of 300 psi, burst backflow holding pressure of over 1,000 psi * Maximum unchecked (normal direction of flow) operating pressure of over 1,000 psi * -40 to 302 degrees F operating temperature rang * Lifetime Warranty
Not Yet Reviewed
$149.00
—
$159.00
Clear your codes with ACDelco A.I.R. check valves. These direct-fit replacements will restore performance, prevent exhaust gases from flowing back through your air injection system, and turn your "check engine" light off. ACDelco A.I.R. check valves are designed to OE specs to deliver the best fit and function with reliable service.
( 6 )
$235.99
These Dorman A.I.R check valves are direct replacements for your OE A.I.R check valve. Dorman has been an industry leader in producing quality replacement parts and continues to strive for excellence. When you're trying to get your vehicle back on the road, look no further than Dorman.
( 4 )
$194.99
Make fuel checks simple with Aeromotive's billet fuel sample valves. Depending on the model you select, the aluminum units can install into your 1/8 in. NPT inlet port with threads or quick-connect attachment. Some contain a stainless steel barb fitting for extension hoses and rotate 360 degrees for easy sampling. A spring-loaded safety feature keeps the sample valve sealed when unlocked, and rotates into a locked position when it's time for racing. When a fuel sample is required, simply rotate the valve to the unlocked position, press down for a fuel sample, re-lock, and go race!
( 7 )
$112.97
—
$223.30
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 371 )
$157.99
Holley 100 gph in-line electric fuel pumps are designed for high-output naturally aspirated and forced induction EFI and carbureted vehicles. They support up to 900 EFI or 1,050 carbureted horsepower, and is compatible with pump gas, race gas, diesel, or E85. The pumps utilize inlet and outlet connections that make installation easy on new applications and quick replacement of existing competitor fuel pumps. Holley universal 100 gph in-line electric fuel pumps include a male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots, and installation instructions. Additional features and specs: * Roller vane design provides fuel pressure and volume to support up to 900 EFI N/A or 700 EFI boosted horsepower * Compatible with Flex Fuel (E85/E90) and all types of gasoline (100 percent alcohol fuels may diminish fuel pump life) * Inlet thread is -10 AN female ORB (O-ring port fitting) and discharge is a female -6 AN ORB
( 24 )
$217.95
Keep your car on the road and healthy with the help of Dorman and these vapor canister vent valves. Your EVAP system is important to keeping your car running at its best, so don't neglect a simple fix. These evaporation canister vent solenoid valves are direct replacements for the original part, so fit and function will never be a problem. Don't put off fixing an important part of your car's emission system when Dorman has the right parts for you.
Not Yet Reviewed
$134.99
Aeromotive fuel pump bladder and baffle sets are a complement to the APEX Phantom systems. These bladder baffles open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The new Phantom bladder and baffles can ensure this. They increase the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder and baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
( 1 )
$212.15
—
$268.95
Denso's proprietary turbine pump technology delivers the highest sustained fuel pressures in the industry, and is why Denso electric fuel pumps are chosen as standard equipment by the world's most demanding OEMs, especially for their premium vehicles. Denso's open-vane impellers are more efficient than competitors' closed-vane impellers. Their ultra-efficient design requires low-amperage to ensure optimum flow rates are maintained over time. Denso carefully balances the armatures at 3,000 rpm, then they are spun again at 8,000 rpm to minimize noise and vibration. Many competitors do not balance their armatures at all. Additional features of Denso electric fuel pumps include: * Turbine technology delivers fuel with minimal pressure pulsation for quieter operation * Check valve maintains consistent system pressure for superior hot fuel handling * Relief valve protects the fuel delivery system * Choke coils minimize radio interference * Brushes designed for durability, efficiency, and low-resistance operation
( 6 )
$100.99
—
$192.99
FUELAB fuel pumps deliver reliable performance that is easy to install in many popular applications. Every 494 series fuel pump goes through individual testing for performance and includes flow and current draw report. These fuel pumps feature an internal check valve and can be used in both carbureted and EFI applications. Upgrade or replace your broken fuel pump unit with a top-notch FUELAB 494 series in-tank fuel pump.
( 2 )
$137.00
Redhorse Performance 6910 Series inline high performance fuel pumps are designed for gasoline only (E85 fuel will lower the lifetime of this pump). Commonly referred to as 044-style pumps, RHP's pumps are rated at 280 lph flow rate (470 lb./hr.) at 70 lb. of pressure, drawing 12.9 amps at 13.5 V. Redhorse Performance 6910 Series inline fuel pumps should be mounted near the fuel tank and gravity fed with fuel for optimum performance. They will fit RHP's 4651 mounting bracket and a special -10AN inlet adapter and -8AN outlet adapter with integrated internal check valve are supplied with the pumps for your convenience.
Not Yet Reviewed
$158.40
Rough idle, hard starting, and the check engine light--these are a few symptoms that can alert the driver that a potential EVAP problem has occurred. Standard Motor vapor canister components featurie industrial-grade materials for robust performance, they are manufactured for prolonged life and superior performance. As a global manufacturer of emission components, Standard Motor maintains complete quality control through the manufacturing process from start to finish.
( 15 )
$102.99
—
$265.99
The single fuel tank line kits for GM LS from Tanks Inc. includes 25 ft. of line and all the fittings that you need for your LS engine swap using one fuel pump and one tank. The kits are designed for LS engines that have a single fuel inlet fitting. Kit includes: * Fuel filter/fuel regulators * In-Line check valve * (2) 1/4 in. NPT to -6AN adapter fitting (fuel pump pickup and return line fittings) * (6) Russel straight -6AN straight Twist-Lok fittings * Russell 3/8 in. Male Quick Disconnect to -6AN Male fittings—fuel feed from regulator to engine fitting * Russell 3/8 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator feed from pump and fuel rail fitting * 25 ft. of -6AN black push lock fuel hose
Not Yet Reviewed
$199.99
Holley electric fuel pump gerotor kits (along with the Holley check valve kits) will service your Holley electric fuel pumps' bottom end. Contaminants or normal wear of your pump's gerotor may cause a drop in fuel flow over time. Get back up to speed with an assist from Holley electric fuel pump gerotor kits and their easy-to-follow instructions (included).
Not Yet Reviewed
$159.95
FUELAB 848 Series inline fuel filters feature an integrated check valve to allow your fuel system to maintain fuel pressure after engine and pump shutdown. Using a check valve helps prevent vapors from building up in your fuel rails during engine cooling. They're available with three different types of filter media--just choose what's best for your fuel system. These filters have male AN flared fitting end caps, so you can attach them directly to other fuel system components. FUELAB 848 Series inline fuel filters feature machined internal radii for minimal pressure drop; and billet aluminum construction with a durable anodized finish, available in six different colors. Their compact design supports up to 200 gph, and they include a low-profile saddle clamp mounting bracket.
Not Yet Reviewed
$164.35
—
$275.00
Radium Engineering remote mount fuel filler necks work with Radium quick-fill and standard fill fuel fillers. Offered in two options, straight or with elbow and wrench, both versions have an FKM flapper check valve mechanism for rollover protection and utilize 1.5 in. I.D. hose. An FKM gasket flange seal and stainless steel hardware are also included. Radium's 75-degree elbow remote fill neck is capable of 360-degree rotation and a 1 7/8 in. aluminum wrench is provided for tightening the B-nut and prevent marring. Choose your preferred remote mount fill neck.
Not Yet Reviewed
$132.95
FUELAB 858 Series inline fuel filters have a larger capacity filter for improved filtering--and feature an integrated check valve to allow your fuel system to maintain fuel pressure after engine and pump shutdown. Using a check valve helps prevent vapors from building up in your fuel rails during engine cooling. They're available with three different types of filter media--just choose what's best for your fuel system. The filters have male AN flared fitting end caps, so you can attach them directly to other fuel system components. These FUELAB 858 Series inline fuel filters feature machined internal radii for minimal pressure drop; and billet aluminum construction with a durable anodized finish, available in six different colors. Their compact design supports up to 200 gph, and they include a low-profile saddle clamp mounting bracket.
( 2 )
$237.00
—
$247.00
If you're looking for an EFI fuel pressure regulator that seals and behaves just like your factory unit but with the added reliability and high flowing capacity you require, check out Go Fast Bits FX-R Series fuel pressure regulators. The multiple inlet/gauge ports allow for a wide range of fuel system setups beyond the usual inlet/outlet, including parallel fuel rail or returnless "deadhead" systems. The two gauge ports allow you to run a mechanical fuel pressure gauge and an ECU fuel pressure sensor if you want to. GFB's engineers incorporated a softer, more compliant yet resilient material for the valve seat that positively seal and hold the fuel pressure on shut down for factory-like sealing and reliable startup, as well as superior fuel resistance suitable for Unleaded, Ethanol, Methanol, and Diesel fuels. Whether you run pump petrol/gasoline, Ethanol, Methanol or Diesel, a single small pump, or a massive triple setup, the Go Fast Bits FX Series EFI fuel pressure regulators range has got you covered, no matter what your fuel pressure regulatory requirements are! Additional features and benefits: * Billet aluminum construction with black anodized finish * Double-layer/double reinforced diaphragms have twice the reinforcing material of the single layer type used in most regulators * Valve seat has a soft, more compliant yet resilient material that positively seals and holds fuel pressure for easier startup vs. conventional aftermarket fuel pressure regulators that utilize metal-to-metal valve and seat * PTFE co-polymer seat with spherical stainless valve retains fuel pressure longer after shutdown * Spring pre-load adjustment screw is O-ring sealed and does not leak vacuum/boost * Completely serviceable
Not Yet Reviewed
$269.10
Moeller Marine's Ultra 6 fuel tanks are all-in-one combo packages. These kits pair their rugged Ultra 6 portable tanks with their hose and primer bulb assemblies and fittings. Each tank is made from seamless thick-walled plastic and equipped with two-way vented caps. The primer bulbs feature dual internal check valves for rapid priming and fuel flow-back prevention. All components are low-perm certified, as well as EPA and CARB approved. Moeller Ultra 6 packages include: * 6 gallon fuel tank * Universal fuel line * Quick-disconnect to tank fuel connector * Fuel line connectors (Evinrude/Johnson, Mercury, Yamaha) * Tank connector with sealant * Hose clamp
Not Yet Reviewed
$144.09
Aeromotive fuel pump bladder baffle sets are a complement to the APEX Phantom systems. They open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The Phantom bladder baffle can ensure this. Installed in the inlet passages at the base of the Phantom bladder, the new Phantom bladder baffle increases the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
Not Yet Reviewed
$118.25
—
$140.00
Biker's Choice Slim Line essential gas caps have ratchet action for ease of closing and to prevent overtightening. These billet aluminum caps have a chrome finish for long-lasting luster, a removable EPA check valve, a locking tool, and paint protector. For the right tightness every time, use Biker's Choice Slim Line essential gas caps.
Not Yet Reviewed
$169.70
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
