Availability
Showing In Stock Items. Show All 207 Items.
Summit Bucks
Russell AN to NPT adapter fittings are the third and final step to completing your hose assembly. The AN side of the fittings uses a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. These fittings are available in straight, 45 degree, and 90 degree styles. They come in your choice of blue anodized aluminum, "Endura" nickel plated aluminum, or stainless steel.
( 96 )
$129.95
Summit Bucks
Don't take chances. Russell AN to inverted flare fittings are designed to ensure the reliability required in your plumbing project. They're made in an assortment of designs to adapt AN-style fittings to a wide range of inverted flare applications.
( 78 )
$214.95
Derale 9000 Series fin and plate transmission coolers are designed with 1 1/4 in. wide turbulator plates to maximize cooling and minimize pressure drops. They also feature sturdy furnace-brazed aluminum construction, and 6 AN inlets with hose barb adapters. Outstanding protection for your vehicle's key components--that's the job of Derale Performance!
( 77 )
$106.56
—
$160.58
The single fuel tank line kits for GM LS from Tanks Inc. includes 25 ft. of line and all the fittings that you need for your LS engine swap using one fuel pump and one tank. The kits are designed for LS engines that have a single fuel inlet fitting. Kit includes: * Fuel filter/fuel regulators * In-Line check valve * (2) 1/4 in. NPT to -6AN adapter fitting (fuel pump pickup and return line fittings) * (6) Russel straight -6AN straight Twist-Lok fittings * Russell 3/8 in. Male Quick Disconnect to -6AN Male fittings—fuel feed from regulator to engine fitting * Russell 3/8 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator feed from pump and fuel rail fitting * 25 ft. of -6AN black push lock fuel hose
Not Yet Reviewed
$199.99
Make changeovers a breeze with Jiffy-tite transmission kits. Available for virtually all transmissions, they offer you freedom from being showered with tranny fluid--simply unhook the self-sealing, quick-disconnect fittings and the job is done--no leaks, no mess. And you don't need tools to connect or disconnect them, saving you time! These kits are valved, with fluorocarbon seals and valve connections at both the socket and plug assemblies, providing slip-proof connections with minimal flow restriction. Depending on your application choice, the kits may include steel braided lines, reducers, plugs, sockets, and elbows. Be leak-free in seconds with Jiffy-tite transmission kits.
( 3 )
$137.65
Radium Engineering fuel pressure regulators are designed with billet aluminum housings that are anodized for a superior finish and laser etched. Providing a convenient package for plumbing and mounting, the compact housings feature two main high-pressure ports threaded for 6AN ORB, a 6AN male return port, and a 1/8 NPT female port for a gauge, pressure transducer, and the like. Radium regulators are available without a top or with a genuine Bosch 3.0 Bar (43.5 psi) or 4.0 Bar (58.2 psi) static top vacuum referenced with a 1:1 ratio and are NOT adjustable. They are secured with a stainless steel snap ring and can easily be removed using snap-ring pliers. Fittings, plug, bracket, and stainless steel hardware are included. Choose the kit to best suit your needs.
( 2 )
$123.45
—
$199.45
Fragola Performance Systems 6000 Series PTFE-lined braided stainless pre-made hoses are manufactured to the highest quality standards for years of trouble-free service. A tough, extruded PTFE inner layer with a smooth bore is fed into a machine that weaves stainless steel wire into the familiar braided pattern. Since stainless steel braided hoses can be abrasive to almost anything they come into contact with, Fragola offers their 6000 Series PTFE-lined stainless hoses with clear or black covers to prevent scratches, scrapes, and scuffs. The properties of PTFE-lined hose make it a natural for highly corrosive applications like automotive brake fluid, hot oil, and power steering fluid; it also handles nitrous oxide with ease. Even under high pressure, it will cycle over and over again without failure. Fragola Performance Systems 6000 Series PTFE-lined hose are available in assorted sizes, lengths, and hose end configurations. Each hose is 100 percent inspected and any flawed sections are discarded. Plus, hose sizes 6-12 AN have a conductive core to dissipate static electricity.
( 141 )
$105.99
Part of Holley's complete line of fuel system products, Holley HP billet fuel pressure regulators are available in a variety of configurations for carbureted or fuel injected engines. Some versions are even adaptable to either carburetors or EFI. They allow you to upgrade a carbureted system to EFI without replacing the fuel pressure regulator. All HP billet fuel pressure regulators feature a 2-port design, provide for precise fuel pressure adjustments, and are available in your choice of demand (no return line) or by-pass (with a return line) styles. Depending on the model, they are for use only with electric fuel pumps, or with either mechanical or electric pumps. Designed for street/strip applications, they are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance and good looks. Whatever your fuel system needs, Holley has you covered. Depending on model, features may include: * Adjustable from 4 to 65 psi for use with EFI or carburetors * 4.5 to 9 psi adjustment range for use with carburetors only * EFI-only models are adjustable from 15 to 65 psi * Two port sizes available, 3/8 in. NPT or -6 AN inlet/outlet and return (where applicable) * Fitting for manifold reference * 1/8 in. NPT gauge port * Boost reference--1:1
( 159 )
$149.95
—
$260.95
FAST engineers set out to develop the ultimate fuel strategy for your EZ-EFI system. FAST EZ-EFI fuel pump hose and fitting kits will handle the task of plumbing your performance build the right way. Kits include: * 25 ft. push lock fuel hose * Two push-on straight fittings * Two push-on 90 degree fittings * Three Gator 1/2 in. clamps
( 2 )
$228.95
Gotta Show Products power steering hose kits are lined with aircraft quality stainless steel PTFE (2500 psi working pressure, 9000 psi burst pressure). The braided stainless steel hoses are cut to fit at the power steering pump end for an exact fit for your application and include the fittings to facilitate installation. Order the power steering hose kit to fit your application needs.
( 3 )
$111.99
—
$124.99
If you're looking for an EFI fuel pressure regulator that seals and behaves just like your factory unit but with the added reliability and high flowing capacity you require, check out Go Fast Bits FX-R Series fuel pressure regulators. The multiple inlet/gauge ports allow for a wide range of fuel system setups beyond the usual inlet/outlet, including parallel fuel rail or returnless "deadhead" systems. The two gauge ports allow you to run a mechanical fuel pressure gauge and an ECU fuel pressure sensor if you want to. GFB's engineers incorporated a softer, more compliant yet resilient material for the valve seat that positively seal and hold the fuel pressure on shut down for factory-like sealing and reliable startup, as well as superior fuel resistance suitable for Unleaded, Ethanol, Methanol, and Diesel fuels. Whether you run pump petrol/gasoline, Ethanol, Methanol or Diesel, a single small pump, or a massive triple setup, the Go Fast Bits FX Series EFI fuel pressure regulators range has got you covered, no matter what your fuel pressure regulatory requirements are! Additional features and benefits: * Billet aluminum construction with black anodized finish * Double-layer/double reinforced diaphragms have twice the reinforcing material of the single layer type used in most regulators * Valve seat has a soft, more compliant yet resilient material that positively seals and holds fuel pressure for easier startup vs. conventional aftermarket fuel pressure regulators that utilize metal-to-metal valve and seat * PTFE co-polymer seat with spherical stainless valve retains fuel pressure longer after shutdown * Spring pre-load adjustment screw is O-ring sealed and does not leak vacuum/boost * Completely serviceable
Not Yet Reviewed
$269.10
The Radium Engineering Direct Mount Regulator (DMR) is a compact high performance adjustable EFI fuel pressure regulator designed with a unique highly versatile mounting system. It can be mounted directly to a compatible fuel rail port using the included 360 degree swiveling adapter, or mounted remotely away from the fuel rail. The compact size fits in areas with limited space without sacrificing performance. This regulator is safe to use with all gasoline and ethanol blends of fuel. The main inlet port on the regulator is female threaded for 6 AN ORB. A swiveling double-ended adapter is included with the kit that allows the regulator to be used in any compatible 8 AN ORB fuel rail port, such as those found on Radium Engineering fuel rails. The return port on the bottom is threaded for 6 AN ORB. The provided 90-degree 6 AN male fuel return fitting can swivel 360 degrees, permitting a multitude of mounting configurations. Other adapter fittings can be installed in the return port if needed (sold separately). Unlike the previous generation, this DMR has two 1/8 in. NPT side port locations that can be used with a pressure gauge, transducer, temperature probe, etc. Two 1/8 in. NPT plugs are provided. Fuel pressure is dialed in using the preloaded set screw on top of the regulator. Two interchangeable orifices are included with calculated flow diameters to match the fuel pump flow to the regulator. This permits the DMR to be used with practically any horsepower engine. This added precision will resist diaphragm flutter and optimize pressure stability. This design has been tested to regulate over 1,200 liters per hour. What's included: * Fuel Pressure Regulator (black or green anodized top) * Swiveling inlet adapter fitting (for 8 AN ORB fuel rail) * PTFE impregnated 1/8 in. NPT plugs (x2) * 6 AN male swivel (for return line) * Return orifices (silver orifice pre-installed)
( 1 )
$170.95
Tanks Inc. offers fuel line kits for GM LS that include the hose and fittings needed to hook up one of Tanks Inc. fuel pumps to an LS engine swap setup. They're designed for LS engine swaps using a single fuel inlet fitting for the fuel source. Tanks Inc. GM LS fuel line kits include: * Fuel pressure regulator/fuel filter combination * 25 ft. of -6 AN twist-lock fuel line * Six straight -6 AN straight twist-lock fittings * Two 1/4 in. NPT to -6 AN straight fittings * Three 3/8 in. female quick-disconnect to -6 AN male fittings * 5/16 in. female quick-disconnect to -6 AN male fitting
( 26 )
$202.99
—
$204.99
Eddie Marine's water outlets are just more examples that reflect their tradition of producing high-quality boating products. With stainless steel construction, the selection of water outlets are beautifully polished and machined in a variety of sizes to fit your application with durable strength and long-lasting good looks. Eddie Marine also offers quality polished cast aluminum water outlets for budget-minded enthusiasts.
Not Yet Reviewed
$176.00
Racing Automotive Group adjustable performance fuel logs are compatible with all gasoline types, E85, and methanol. Made from billet aluminum or nickel, the fuel logs are designed for use with a variety of dual feed Holley carburetors—including 4150, 4150 HP, 4160, 4500, and 4500 HP models. They're available with -6, -8, or -10 AN inlets; and -8 or -10 outlets. Most fuel logs adjust between 8 1/2 in. and 11 3/4 in. for necessary clearance.
Not Yet Reviewed
$129.99
—
$139.99
FTI Performance automatic transmission cooler line kits contain the necessary components to add an external cooler when upgrading your transmission and torque converter. They include AN hose, hose ends, and adapter fittings to install your new cooler and keep your street/race machine cool.
( 3 )
$219.00
Tanks Inc. universal fuel line kits include 25 ft. of line and all or most of the fittings that you need to plumb your fuel system when using a Tanks Inc. fuel pump. The kits will give you all the fittings needed to plumb a FI-Tech system and most fittings to plumb systems that use an external fuel regulator, such as MSD Atomic, Holley Terminator, or FAST EZ-EFI. Tanks Inc. universal fuel line kits include: * Fuel filter * Two quick-disconnect fittings for fuel filter * Two 1/4 in. NPT to -6 AN fuel pump adapter fittings * Six -6 AN straight Twist-Lok fittings * 25 ft. -6 AN black Twist-Lok fuel hose
( 19 )
$174.99
—
$184.99
Lowdoller Motorsports push-lock boost control fitting kits provide a secure, quick, and simple way to plumb various boost and vacuum components in turbocharged and supercharged vehicles, such as wastegates, boost controllers, and blow-off valves. The "push-lock" design allows for tool-free installation by simply pushing the tubing into the fitting, which then grips the line. These types of fittings offer a significant advantage over traditional methods like rubber hoses and clamps, making the entire setup easier to connect and disconnect for maintenance or adjustments. Order the fitting kit designed for your application to plumb your vacuum/boost lines like a pro!
Not Yet Reviewed
$149.99
Heidts power steering valve fitting kits are designed to hook up your adjustable power steering valve to the power steering system with the pump, rack and pinion, or steering box. Kits include: * 4 straight -6 AN hose ends * 2 straight -6 AN to 1/4 in. NPT adapters * 2 straight -6 AN to 3/8 in. NPT adapters
( 1 )
$118.00
Purge the air from your lines with Nitrous Express mainline nitrous oxide purge systems to allow for the immediate activation of your nitrous system. They allow you to purge the system, even without a purge port built into your solenoids, and they can also be used to lower the bottle pressure for spot-on performance every time you activate the systems. They are available in two hose sizes. Includes: * Purge solenoid * 4 AN adapter fitting * Push-button activation * 1/8 in. to 1/8 in. NPT fitting * 1/8 in. NPT to compression fitting * 7 in. of 3/16 in. stainless tubing
( 22 )
$131.21
Improved Racing created the first bolt-on automatic transmission fluid adapter with a thermostat for GM's 6L, 8L, and 10L automatic transmissions. Each adapter's built-in thermostat automatically bypasses the transmission cooler until the fluid reaches operating temperature. The thermostat reduces rough shifts caused by overcooled transmission fluid, reduces wear, and improves efficiency and horsepower. Your transmission can now reach operating temps quickly while retaining the cooling capacity needed for high load activities such as towing or racing. It's the best of both worlds! Adapter model TGM-100-T2 features SAE female -6 AN O-ring boss ports that accept adapter fittings for 5/16, 3/8, 1/2 in. hose barbs or male AN fittings. This allows you to run common rubber transmission cooler lines or braided AN lines. Hard tube adapters may also be used to connect the factory lines directly to the adapter (may require minor bending or adjustment of factory lines). Important application notes: * The adapter can only be used in conjunction with external transmission fluid coolers. * The adapter does not directly connect to the factory hard lines. Aftermarket lines or hard tube adapter fittings must be used. * The adapter will only help resolve rough shifting issues if they are caused by overcooling of the transmission, usually due to the addition of a larger aftermarket transmission cooler. Note that 8L45 and 8L90 transmissions rough shifting issues can often be resolved through GM TSB 18-NA-355 and by simply flushing the transmission fluid. Features and benefits: * Bolt-on fitment for 6L, 8L, and 10L series General Motors automatic transmissions (adapters are required for connecting to factory lines). * Built-in thermostat prevents temperatures from dropping below optimal levels, reducing wear, improving efficiency and horsepower, and helping to eliminate rough shifting. * SAE -6 AN female O-ring boss ports for connection flexibility; choose any line size and type you want. * 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish. * Uses the factory GM transmission cooler adapter gasket. * Lifetime Warranty Includes: * TGM-100 transmission cooler adapter block with built-in thermostat * Transmission cooler adapter gasket * Zinc-plated steel mounting screws * Installation instructions Applications: * Fits most General Motors 6L, 8L, and 10L series automatic transmissions, including: all 45, 50, 60, 70, 80, 90 variants, and aftermarket performance versions * Fits both E and non-E transmission variants
Not Yet Reviewed
$199.00
Many classes of racing require catch tanks to keep oil and coolant from discharging on to the race track. Canton Racing universal overflow catch tanks are designed to easily capture surplus fluid. These strong, lightweight tanks are available in various shapes and capacities.
( 7 )
$122.00
Holley EFI fuel pulse dampers act in tandem with the fuel pressure regulator to further control the fuel pressure in an EFI system. They act to smooth out the pressure pulsations caused by the injectors opening and closing as well as the fuel pump operating. These pulsations happen so quickly that in many cases they can't be identified with an analog gauge but can cause issues with fuel delivery to the engine. Options include: * Direct-mount or inline mount * Multiple inlet/outlet dimensions * Standard or extended fuel pressure range * Male or female threads Features: * Engineered to stabilize pressure pulsations caused by the injectors opening; ideal for applications with large fuel injectors and high-volume fuel pumps * Compatible with any fuel; full anodized billet aluminum construction with stainless steel springs and fluorosilicone diaphragm * Fittings included for damper/regulators and direct-mount dampers * 1/8 in. NPT port on body of damper/regulators and inline dampers for easy installation of mechanical pressure gauge or pressure transducer * Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
( 5 )
$106.95
—
$154.95
Holley Sniper EFI universal bypass fuel regulators are for use with fuel systems in street or track applications. They feature adjustable base pressure from 40-130 psi, a gauge port, and a boost reference port. These regulators are ideal for vehicles/systems where superior flow and pressure control are needed. Each unit is precision-machined from 6061-T6 billet aluminum for strength and durability—and features a black, bright dip anodized body and clear bright dip anodized top for corrosion resistance and good looks. Choose from -6 or -8 AN inlet/outlet return fitting sizes. Product features: * Longer spring for wider range of adjustment (40-130 psi) * Oversized bypass orifice and corrugated diaphragm for superior flow * Constructed of billet aluminum with a black anodized base and top for good looks * Offered in -6 and -8 ORB configurations * Used in systems with a return line back to tank * 1/8 in.-NPT boost reference port (ratio 1:1) * 1/8 in.-NPT fuel gauge port * Alcohol fuel and race gas compatible * Includes mounting bracket, hardware, and an 1/8 in.-NPT barb fitting for manifold reference
( 1 )
$177.95
—
$188.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
